sdram.c.bak

Ti C6416 读写 SDRAM 口范例. 编程环境CCS2.2版本

/*****************************************************************************
	FILENAME:	SDRAM.C
	DESIGNER:	戴展波
	DATE：		2004/09/25
******************************************************************************/

#include <stdio.h>
#include <csl.h>
#include <csl_irq.h>
#include <csl_chip.h>
#include <csl_emifa.h>


static EMIFA_Config MyEmifaConfig = 
{
	EMIFA_GBLCTL_RMK
	(
		EMIFA_GBLCTL_EK2RATE_FULLCLK,	//1 X EMIF input clock
		EMIFA_GBLCTL_EK2HZ_CLK,		//eclkout2 continue output during hold
		EMIFA_GBLCTL_EK2EN_ENABLE,	//eclkout2 enable output
		EMIFA_GBLCTL_BRMODE_MRSTATUS,	//bus request is memory access or refresh pending/in progress
		EMIFA_GBLCTL_NOHOLD_DISABLE,
		EMIFA_GBLCTL_EK1HZ_CLK,		//eclkout1 continue output during hold
		EMIFA_GBLCTL_EK1EN_ENABLE,	//eclkout1 enable output
		EMIFA_GBLCTL_CLK4EN_ENABLE,	//clkout4 output enable
		EMIFA_GBLCTL_CLK6EN_ENABLE	//clkout6 output enable
	),
	0xffffff83,
	0xffffffe3,
	0x22a28a22,
	0x22a28a22,
	EMIFA_SDCTL_RMK
	(
		EMIFA_SDCTL_SDBSZ_4BANKS,	//SDRAM bank size 4 banks
		EMIFA_SDCTL_SDRSZ_11ROW,	//row number = 11
		EMIFA_SDCTL_SDCSZ_8COL,		//column number = 8
		EMIFA_SDCTL_RFEN_ENABLE,	//SDRAM refresh enable
		//EMIFA_SDCTL_INIT_NO,		//SDRAM 配置完每个CE空间后，不初始化
		EMIFA_SDCTL_INIT_YES,		//SDRAM 配置完每个CE空间后，初始化
		EMIFA_SDCTL_TRCD_OF(2),		//TRCD = (Trcd / Tcyc) - 1
		EMIFA_SDCTL_TRP_OF(2),		//TRP = (Trp / Tcyc) - 1
		EMIFA_SDCTL_TRC_OF(8),
		EMIFA_SDCTL_SLFRFR_DISABLE	//self refresh mode disable
	),
	EMIFA_SDTIM_RMK
	(
		EMIFA_SDTIM_XRFR_DEFAULT,	//EXT TIMER default
		EMIFA_SDTIM_PERIOD_OF(2083)	//refresh period,clockout1 = 10ns
	),
	EMIFA_SDEXT_RMK
	(
		EMIFA_SDEXT_WR2RD_OF(0),	//cycles between write to read command = 1,subtract 1 is 0
		EMIFA_SDEXT_WR2DEAC_OF(1),	//cycles between write to precharge = 2
		EMIFA_SDEXT_WR2WR_OF(1),	//cycles between write to write = 2
		EMIFA_SDEXT_R2WDQM_OF(1),	//cycles between read to bex = 2
		EMIFA_SDEXT_RD2WR_OF(0),	//cycles between read to write = 1
		EMIFA_SDEXT_RD2DEAC_OF(1),	//
		EMIFA_SDEXT_RD2RD_OF(0),	//
		EMIFA_SDEXT_THZP_OF(2),		//Troh = 3 cycle
		EMIFA_SDEXT_TWR_OF(1),		//Twr = 1 clock +6 ns
		EMIFA_SDEXT_TRRD_OF(0),		//Trrd = 12ns
		EMIFA_SDEXT_TRAS_OF(5),		//Tras = 42ns
		EMIFA_SDEXT_TCL_OF(1)		//cas latency = 3 clock
	),
	0x00000002,
	0x00000002,
	0x00000002,
	0x00000002
};

//volatile Uint32* SDRAM_FIRST_ADDRESS = (volatile Uint32 *) 0x80000000;

#pragma DATA_SECTION(sdram_data,".off_ram");
unsigned short sdram_data[0x10000];

extern far void vectors();

void main()
{
	int i;
	Uint32 good_flag;
	good_flag = 0;
	//初始化CSL
	CSL_init();
	//配置EMIFA
	EMIFA_config(&MyEmifaConfig);
	IRQ_setVecs(vectors);
    	IRQ_nmiEnable();
    	IRQ_globalEnable();
//     *SDRAM_FIRST_ADDRESS = 0x12345678;
	for(i = 0; i < 0x10000; i++)
	{
		sdram_data[i] = 0x1234+i;
	}
	for(i = 0; i < 0x10000; i++)
	{
		if(sdram_data[i] != 0x1234+i)
		{
			good_flag = 0;
			break;
		}
		good_flag = 1;
	}
	if(good_flag == 1)
	{
		printf("SDRAM TEST IS OK!");
	}
	else
	{
		printf("SDRAM TEST IS FAILED!");
	}
}