skge.c

该文件是rt_linux

	}
	/*
	 * do it all again is case we cleared an interrupt that 
	 * came in after handling the ring (OUTs may be delayed
	 * in hardware buffers, but are through after IN)
	 */
	// ReceiveIrq(pAC, &pAC->RxPort[pAC->ActivePort]);
	ReceiveIrq(pAC, &pAC->RxPort[0]);
	ReceiveIrq(pAC, &pAC->RxPort[1]);
	



#if 0
// #ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
	spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
	FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
	spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);

	spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
	FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]);
	spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);

#if 0	/* only if sync. queues used */
	spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
	FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
	spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
	
	spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
	FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH);
	spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
#endif /* 0 */
#endif /* USE_TX_COMPLETE */

	/* IRQ is processed - Enable IRQs again*/
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);

	return;
} /* SkGeIsr */


/****************************************************************************
 *
 *	SkGeIsrOnePort - handle adapter interrupts for single port adapter
 *
 * Description:
 *	The interrupt routine is called when the network adapter
 *	generates an interrupt. It may also be called if another device
 *	shares this interrupt vector with the driver.
 *	This is the same as above, but handles only one port.
 *
 * Returns: N/A
 *
 */
static void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs)
{
struct net_device *dev = (struct net_device *)dev_id;
DEV_NET		*pNet;
SK_AC		*pAC;
SK_U32		IntSrc;		/* interrupts source register contents */	

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;
	
	/*
	 * Check and process if its our interrupt
	 */
	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
	if (IntSrc == 0) {
		return;
	}

	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
#if 0 /* software irq currently not used */
		if (IntSrc & IRQ_SW) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("Software IRQ\n"));
		}
#endif
		if (IntSrc & IRQ_EOF_RX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF RX1 IRQ\n"));
			ReceiveIrq(pAC, &pAC->RxPort[0]);
			SK_PNMI_CNT_RX_INTR(pAC,0);
		}
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF AS TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC,0);
			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
		}
#if 0 /* only if sync. queues used */
		if (IntSrc & IRQ_EOF_SY_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF SY TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC,1);
			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
		}
#endif /* 0 */
#endif /* USE_TX_COMPLETE */

		/* do all IO at once */
		if (IntSrc & IRQ_EOF_RX1)
			ClearAndStartRx(pAC, 0);
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1)
			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
#endif
		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
	} /* while (IntSrc & IRQ_MASK != 0) */
	
	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
			("SPECIAL IRQ\n"));
		pAC->CheckQueue = SK_FALSE;
		spin_lock(&pAC->SlowPathLock);
		if (IntSrc & SPECIAL_IRQS)
			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock(&pAC->SlowPathLock);
	}
	/*
	 * do it all again is case we cleared an interrupt that 
	 * came in after handling the ring (OUTs may be delayed
	 * in hardware buffers, but are through after IN)
	 */
	ReceiveIrq(pAC, &pAC->RxPort[0]);

#if 0
// #ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
	spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
	FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
	spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);

#if 0	/* only if sync. queues used */
	spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
	FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
	spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
	
#endif /* 0 */
#endif /* USE_TX_COMPLETE */

	/* IRQ is processed - Enable IRQs again*/
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);

	return;
} /* SkGeIsrOnePort */


/****************************************************************************
 *
 *	SkGeOpen - handle start of initialized adapter
 *
 * Description:
 *	This function starts the initialized adapter.
 *	The board level variable is set and the adapter is
 *	brought to full functionality.
 *	The device flags are set for operation.
 *	Do all necessary level 2 initialization, enable interrupts and
 *	give start command to RLMT.
 *
 * Returns:
 *	0 on success
 *	!= 0 on error
 */
static int SkGeOpen(
struct net_device	*dev)
{
DEV_NET			*pNet;
SK_AC			*pAC;
unsigned long	Flags;		/* for spin lock */
int		i;
SK_EVPARA		EvPara;		/* an event parameter union */

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;
	
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC));

	if (pAC->BoardLevel == 0) {
		/* level 1 init common modules here */
		if (SkGeInit(pAC, pAC->IoBase, 1) != 0) {
			printk("%s: HWInit(1) failed\n", pAC->dev[pNet->PortNr]->name);
			return (-1);
		}
		SkI2cInit	(pAC, pAC->IoBase, 1);
		SkEventInit	(pAC, pAC->IoBase, 1);
		SkPnmiInit	(pAC, pAC->IoBase, 1);
		SkAddrInit	(pAC, pAC->IoBase, 1);
		SkRlmtInit	(pAC, pAC->IoBase, 1);
		SkTimerInit	(pAC, pAC->IoBase, 1);
		pAC->BoardLevel = 1;
	}

	if (pAC->BoardLevel != 2) {
		/* level 2 init modules here */
		SkGeInit	(pAC, pAC->IoBase, 2);
		SkI2cInit	(pAC, pAC->IoBase, 2);
		SkEventInit	(pAC, pAC->IoBase, 2);
		SkPnmiInit	(pAC, pAC->IoBase, 2);
		SkAddrInit	(pAC, pAC->IoBase, 2);
		SkRlmtInit	(pAC, pAC->IoBase, 2);
		SkTimerInit	(pAC, pAC->IoBase, 2);
		pAC->BoardLevel = 2;
	}
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		/* Enable transmit descriptor polling. */
		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
		FillRxRing(pAC, &pAC->RxPort[i]);
	}
	SkGeYellowLED(pAC, pAC->IoBase, 1);

#ifdef USE_INT_MOD
/* moderate only TX complete interrupts (these are not time critical) */
#define IRQ_MOD_MASK (IRQ_EOF_AS_TX1 | IRQ_EOF_AS_TX2)
	{
		unsigned long ModBase;
		ModBase = 53125000 / INTS_PER_SEC;
		SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
		SK_OUT32(pAC->IoBase, B2_IRQM_MSK, IRQ_MOD_MASK);
		SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
	}
#endif

	/* enable Interrupts */
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);

	if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) {
		EvPara.Para32[0] = pAC->RlmtNets;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
			EvPara);
		EvPara.Para32[0] = pAC->RlmtMode;
		EvPara.Para32[1] = 0;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE,
			EvPara);
	}

	EvPara.Para32[0] = pNet->NetNr;
	EvPara.Para32[1] = -1;
	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
	SkEventDispatcher(pAC, pAC->IoBase);
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

	pAC->MaxPorts++;
	pNet->Up = 1;

	MOD_INC_USE_COUNT;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeOpen suceeded\n"));

	return (0);
} /* SkGeOpen */


/****************************************************************************
 *
 *	SkGeClose - Stop initialized adapter
 *
 * Description:
 *	Close initialized adapter.
 *
 * Returns:
 *	0 - on success
 *	error code - on error
 */
static int SkGeClose(
struct net_device	*dev)
{
DEV_NET		*pNet;
SK_AC		*pAC;

unsigned long	Flags;		/* for spin lock */
int				i;
int				PortIdx;
SK_EVPARA		EvPara;

	netif_stop_queue(dev);

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	if (pAC->RlmtNets == 1)
		PortIdx = pAC->ActivePort;
	else
		PortIdx = pNet->NetNr;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));

	/* 
	 * Clear multicast table, promiscuous mode ....
	 */
	 
	SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
	SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
		SK_PROM_MODE_NONE);

	if (pAC->MaxPorts == 1) {
		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
		/* disable interrupts */
		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
		EvPara.Para32[0] = pNet->NetNr;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
		SkEventDispatcher(pAC, pAC->IoBase);
		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
		/* stop the hardware */
		SkGeDeInit(pAC, pAC->IoBase);
		pAC->BoardLevel = 0;
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	} else {

		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
		EvPara.Para32[0] = pNet->NetNr;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
		
		/* Stop port */
		spin_lock_irqsave(&pAC->TxPort[pNet->PortNr]
			[TX_PRIO_LOW].TxDesRingLock, Flags);
		SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, 
			SK_STOP_ALL, SK_HARD_RST);
		spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr]
			[TX_PRIO_LOW].TxDesRingLock, Flags);
	}
	if (pAC->RlmtNets == 1) {
		/* clear all descriptor rings */
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			ReceiveIrq(pAC, &pAC->RxPort[i]);
			ClearRxRing(pAC, &pAC->RxPort[i]);
			ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]);
		}
	} else {
		/* clear port descriptor rings */
		ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr]);
		ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]);
		ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]);
	}

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeClose: done "));

	pAC->MaxPorts--;
	pNet->Up = 0;
	MOD_DEC_USE_COUNT;
	
	return (0);
} /* SkGeClose */

/*****************************************************************************
 *
 * 	SkGeXmit - Linux frame transmit function
 *
 * Description:
 *	The system calls this function to send frames onto the wire.
 *	It puts the frame in the tx descriptor ring. If the ring is
 *	full then, the 'tbusy' flag is set.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 * WARNING: returning 1 in 'tbusy' case caused system crashes (double
 *	allocated skb's) !!!
 */
static int SkGeXmit(struct sk_buff *skb, struct net_device *dev)
{
DEV_NET		*pNet;
SK_AC		*pAC;
int			Rc;	/* return code of XmitFrame */
	
	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	if (pAC->RlmtNets == 2)
		Rc = XmitFrame(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], skb);
	else
		Rc = XmitFrame(pAC, &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], skb);

	/* Transmitter out of resources? */
	if (Rc <= 0)
		netif_stop_queue(dev);

	/* If not taken, give buffer ownership back to the
	 * queueing layer.
	 */
	if (Rc < 0)
		return (1);

	dev->trans_start = jiffies;
	return (0);
} /* SkGeXmit */


/*****************************************************************************
 *
 * 	XmitFrame - fill one socket buffer into the transmit ring
 *
 * Description:
 *	This function puts a message into the transmit descriptor ring
 *	if there is a descriptors left.
 *	Linux skb's consist of only one continuous buffer.
 *	The first step locks the ring. It is held locked
 *	all time to avoid problems with SWITCH_../PORT_RESET.
 *	Then the descriptoris allocated.
 *	The second part is linking the buffer to the descriptor.
 *	At the very last, the Control field of the descriptor
 *	is made valid for the BMU and a start TX command is given
 *	if necessary.
 *
 * Returns:
 *  > 0 - on succes: the number of bytes in the message
 *  = 0 - on resource shortage: this frame sent or dropped, now
 *        the ring is full ( -> set tbusy)
 *  < 0 - on failure: other problems ( -> return failure to upper layers)
 */
static int XmitFrame(
SK_AC 		*pAC,		/* pointer to adapter context */
TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
struct sk_buff	*pMessage)	/* pointer to send-message */
{
TXD		*pTxd;		/* the rxd to fill */
unsigned long	Flags;
SK_U64		PhysAddr;
int		BytesSend;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
		("X"));

	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);

	if (pTxPort->TxdRingFree == 0) {