⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 fault-common.c

📁 该文件是rt_linux
💻 C
字号:
/* *  linux/arch/arm/mm/fault-common.c * *  Copyright (C) 1995  Linus Torvalds *  Modifications for ARM processor (c) 1995-2001 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#include <linux/config.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/errno.h>#include <linux/string.h>#include <linux/types.h>#include <linux/ptrace.h>#include <linux/mman.h>#include <linux/mm.h>#include <linux/interrupt.h>#include <linux/proc_fs.h>#include <linux/init.h>#include <asm/system.h>#include <asm/uaccess.h>#include <asm/pgtable.h>#include <asm/unaligned.h>#ifdef CONFIG_CPU_26#define FAULT_CODE_WRITE	0x02#define FAULT_CODE_FORCECOW	0x01#define DO_COW(m)		((m) & (FAULT_CODE_WRITE|FAULT_CODE_FORCECOW))#define READ_FAULT(m)		(!((m) & FAULT_CODE_WRITE))#else/* * On 32-bit processors, we define "mode" to be zero when reading, * non-zero when writing.  This now ties up nicely with the polarity * of the 26-bit machines, and also means that we avoid the horrible * gcc code for "int val = !other_val;". */#define DO_COW(m)		(m)#define READ_FAULT(m)		(!(m))#endifNORET_TYPE void die(const char *msg, struct pt_regs *regs, int err) ATTRIB_NORET;/* * This is useful to dump out the page tables associated with * 'addr' in mm 'mm'. */void show_pte(struct mm_struct *mm, unsigned long addr){	pgd_t *pgd;	if (!mm)		mm = &init_mm;	printk(KERN_ALERT "pgd = %p\n", mm->pgd);	pgd = pgd_offset(mm, addr);	printk(KERN_ALERT "*pgd = %08lx", pgd_val(*pgd));	do {		pmd_t *pmd;		pte_t *pte;		if (pgd_none(*pgd))			break;		if (pgd_bad(*pgd)) {			printk("(bad)");			break;		}		pmd = pmd_offset(pgd, addr);		printk(", *pmd = %08lx", pmd_val(*pmd));		if (pmd_none(*pmd))			break;		if (pmd_bad(*pmd)) {			printk("(bad)");			break;		}		pte = pte_offset(pmd, addr);		printk(", *pte = %08lx", pte_val(*pte));#ifdef CONFIG_CPU_32		printk(", *ppte = %08lx", pte_val(pte[-PTRS_PER_PTE]));#endif	} while(0);	printk("\n");}/* * Oops.  The kernel tried to access some page that wasn't present. */static void__do_kernel_fault(struct mm_struct *mm, unsigned long addr, int error_code,		  struct pt_regs *regs){	unsigned long fixup;	/*	 * Are we prepared to handle this kernel fault?	 */	if ((fixup = search_exception_table(instruction_pointer(regs))) != 0) {#ifdef DEBUG		printk(KERN_DEBUG "%s: Exception at [<%lx>] addr=%lx (fixup: %lx)\n",			current->comm, regs->ARM_pc, addr, fixup);#endif		regs->ARM_pc = fixup;		return;	}	/*	 * No handler, we'll have to terminate things with extreme prejudice.	 */	printk(KERN_ALERT		"Unable to handle kernel %s at virtual address %08lx\n",		(addr < PAGE_SIZE) ? "NULL pointer dereference" :		"paging request", addr);	show_pte(mm, addr);	die("Oops", regs, error_code);	do_exit(SIGKILL);}/* * Something tried to access memory that isn't in our memory map.. * User mode accesses just cause a SIGSEGV */static void__do_user_fault(struct task_struct *tsk, unsigned long addr, int error_code,		int code, struct pt_regs *regs){	struct siginfo si;#ifdef CONFIG_DEBUG_USER	printk(KERN_DEBUG "%s: unhandled page fault at pc=0x%08lx, "	       "lr=0x%08lx (bad address=0x%08lx, code %d)\n",	       tsk->comm, regs->ARM_pc, regs->ARM_lr, addr, error_code);	show_regs(regs);#endif	tsk->thread.address = addr;	tsk->thread.error_code = error_code;	tsk->thread.trap_no = 14;	si.si_signo = SIGSEGV;	si.si_errno = 0;	si.si_code = code;	si.si_addr = (void *)addr;	force_sig_info(SIGSEGV, &si, tsk);}voiddo_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr,	    int error_code, struct pt_regs *regs){	/*	 * If we are in kernel mode at this point, we	 * have no context to handle this fault with.	 */	if (user_mode(regs))		__do_user_fault(tsk, addr, error_code, SEGV_MAPERR, regs);	else		__do_kernel_fault(mm, addr, error_code, regs);}static int__do_page_fault(struct mm_struct *mm, unsigned long addr, int error_code,		struct task_struct *tsk){	struct vm_area_struct *vma;	int fault, mask;	vma = find_vma(mm, addr);	fault = -2; /* bad map area */	if (!vma)		goto out;	if (vma->vm_start > addr)		goto check_stack;	/*	 * Ok, we have a good vm_area for this	 * memory access, so we can handle it.	 */good_area:	if (READ_FAULT(error_code)) /* read? */		mask = VM_READ|VM_EXEC;	else		mask = VM_WRITE;	fault = -1; /* bad access type */	if (!(vma->vm_flags & mask))		goto out;	/*	 * If for any reason at all we couldn't handle	 * the fault, make sure we exit gracefully rather	 * than endlessly redo the fault.	 */survive:	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, DO_COW(error_code));	/*	 * Handle the "normal" cases first - successful and sigbus	 */	switch (fault) {	case 2:		tsk->maj_flt++;		return fault;	case 1:		tsk->min_flt++;	case 0:		return fault;	}	fault = -3; /* out of memory */	if (tsk->pid != 1)		goto out;	/*	 * If we are out of memory for pid1,	 * sleep for a while and retry	 */	yield();	goto survive;check_stack:	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))		goto good_area;out:	return fault;}int do_page_fault(unsigned long addr, int error_code, struct pt_regs *regs){	struct task_struct *tsk;	struct mm_struct *mm;	int fault;	tsk = current;	mm  = tsk->mm;	/*	 * If we're in an interrupt or have no user	 * context, we must not take the fault..	 */	if (in_interrupt() || !mm)		goto no_context;	down_read(&mm->mmap_sem);	fault = __do_page_fault(mm, addr, error_code, tsk);	up_read(&mm->mmap_sem);	/*	 * Handle the "normal" case first	 */	if (fault > 0)		return 0;	/*	 * We had some memory, but were unable to	 * successfully fix up this page fault.	 */	if (fault == 0)		goto do_sigbus;	/*	 * If we are in kernel mode at this point, we	 * have no context to handle this fault with.	 */	if (!user_mode(regs))		goto no_context;	if (fault == -3) {		/*		 * We ran out of memory, or some other thing happened to		 * us that made us unable to handle the page fault gracefully.		 */		printk("VM: killing process %s\n", tsk->comm);		do_exit(SIGKILL);	} else		__do_user_fault(tsk, addr, error_code, fault == -1 ?				SEGV_ACCERR : SEGV_MAPERR, regs);	return 0;/* * We ran out of memory, or some other thing happened to us that made * us unable to handle the page fault gracefully. */do_sigbus:	/*	 * Send a sigbus, regardless of whether we were in kernel	 * or user mode.	 */	tsk->thread.address = addr;	tsk->thread.error_code = error_code;	tsk->thread.trap_no = 14;	force_sig(SIGBUS, tsk);#ifdef CONFIG_DEBUG_USER	printk(KERN_DEBUG "%s: sigbus at 0x%08lx, pc=0x%08lx\n",		current->comm, addr, instruction_pointer(regs));#endif	/* Kernel mode? Handle exceptions or die */	if (user_mode(regs))		return 0;no_context:	__do_kernel_fault(mm, addr, error_code, regs);	return 0;}/* * First Level Translation Fault Handler * * We enter here because the first level page table doesn't contain * a valid entry for the address. * * If the address is in kernel space (>= TASK_SIZE), then we are * probably faulting in the vmalloc() area. * * If the init_task's first level page tables contains the relevant * entry, we copy the it to this task.  If not, we send the process * a signal, fixup the exception, or oops the kernel. * * NOTE! We MUST NOT take any locks for this case. We may be in an * interrupt or a critical region, and should only copy the information * from the master page table, nothing more. */int do_translation_fault(unsigned long addr, int error_code, struct pt_regs *regs){	struct task_struct *tsk;	struct mm_struct *mm;	int offset;	pgd_t *pgd, *pgd_k;	pmd_t *pmd, *pmd_k;	if (addr < TASK_SIZE)		return do_page_fault(addr, error_code, regs);	offset = __pgd_offset(addr);	pgd = cpu_get_pgd() + offset;	pgd_k = init_mm.pgd + offset;	if (pgd_none(*pgd_k))		goto bad_area;#if 0	/* note that we are two-level */	if (!pgd_present(*pgd))		set_pgd(pgd, *pgd_k);#endif	pmd_k = pmd_offset(pgd_k, addr);	pmd   = pmd_offset(pgd, addr);	if (pmd_none(*pmd_k))		goto bad_area;	set_pmd(pmd, *pmd_k);	return 0;bad_area:	tsk = current;	mm  = tsk->active_mm;	do_bad_area(tsk, mm, addr, error_code, regs);	return 0;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -