makefile

内有4510等好几个bsp

CPU		= ARMARCH4								/* 目标板的CPU体系结构 */
TOOL		= gnu									/* 编译工具链 */
EXTRA_DEFINE	= -Wcomment -DCPU_7TDMI -DARMMMU=ARMMMU_NONE -DARMCACHE=ARMCACHE_KS32C	/* 附加的编译选项 */

TGT_DIR = $(WIND_BASE)/target								/* 目标路径 */

include $(TGT_DIR)/h/make/defs.bsp							/* 定义了Vxworks系统运行的标准变量 */
include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)						/* 定义了对应目标板CPU结构所选用的编译工具链 */
include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)					/* 定义了与主机系统相关的宏变量 */

DOC_FILES	= sysLib sngks32cEnd sngks32cSio					/* DOC_FILES宏指明了哪些源文件有相应的文档说明 */

## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.

TARGET_DIR	= Bsp_AnywhereII							/* 目标目录 */
VENDOR		= Sumsung								/* 目标板生产厂商 */
BOARD		= AnywhereII								/* 目标板名字 */

#
# The constants ROM_TEXT_ADRS, ROM_SIZE, and RAM_HIGH_ADRS are defined
# in config.h and Makefile.
# All definitions for these constants must be identical.
#

ROM_TEXT_ADRS	= 01000000 # ROM entry address						/* 16进制Bootrom入口地址，需与config.h中定义相同 */
ROM_WARM_ADRS	= 01000004 # ROM warm entry address					/* 热启动入口地址 */
ROM_SIZE	= 00080000 # number of bytes of ROM space				/* Rom大小，需与config.h中定义相同 */

RAM_LOW_ADRS	= 00001000 # RAM text/data address (bootrom)				/* 加载Vxworks的目标地址 */
RAM_HIGH_ADRS	= 00100000 # RAM text/data address (bootrom)				/* Bootrom映像在Ram的起始地址，需与config.h中定义相同 */ 

MACH_EXTRA      = sngks32cEnd.o								/* 在此用户可以加入自己应用程序模块 */

## Only redefine make definitions above this point, or the expansion of
## makefile target dependencies may be incorrect.

include $(TGT_DIR)/h/make/rules.bsp
include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)