📄 cutil.c
字号:
/* * -- SuperLU routine (version 3.0) -- * Univ. of California Berkeley, Xerox Palo Alto Research Center, * and Lawrence Berkeley National Lab. * October 15, 2003 * *//* Copyright (c) 1994 by Xerox Corporation. All rights reserved. THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED OR IMPLIED. ANY USE IS AT YOUR OWN RISK. Permission is hereby granted to use or copy this program for any purpose, provided the above notices are retained on all copies. Permission to modify the code and to distribute modified code is granted, provided the above notices are retained, and a notice that the code was modified is included with the above copyright notice.*/#include <math.h>#include "slu_cdefs.h"voidcCreate_CompCol_Matrix(SuperMatrix *A, int m, int n, int nnz, complex *nzval, int *rowind, int *colptr, Stype_t stype, Dtype_t dtype, Mtype_t mtype){ NCformat *Astore; A->Stype = stype; A->Dtype = dtype; A->Mtype = mtype; A->nrow = m; A->ncol = n; A->Store = (void *) SUPERLU_MALLOC( sizeof(NCformat) ); if ( !(A->Store) ) ABORT("SUPERLU_MALLOC fails for A->Store"); Astore = A->Store; Astore->nnz = nnz; Astore->nzval = nzval; Astore->rowind = rowind; Astore->colptr = colptr;}voidcCreate_CompRow_Matrix(SuperMatrix *A, int m, int n, int nnz, complex *nzval, int *colind, int *rowptr, Stype_t stype, Dtype_t dtype, Mtype_t mtype){ NRformat *Astore; A->Stype = stype; A->Dtype = dtype; A->Mtype = mtype; A->nrow = m; A->ncol = n; A->Store = (void *) SUPERLU_MALLOC( sizeof(NRformat) ); if ( !(A->Store) ) ABORT("SUPERLU_MALLOC fails for A->Store"); Astore = A->Store; Astore->nnz = nnz; Astore->nzval = nzval; Astore->colind = colind; Astore->rowptr = rowptr;}/* Copy matrix A into matrix B. */voidcCopy_CompCol_Matrix(SuperMatrix *A, SuperMatrix *B){ NCformat *Astore, *Bstore; int ncol, nnz, i; B->Stype = A->Stype; B->Dtype = A->Dtype; B->Mtype = A->Mtype; B->nrow = A->nrow;; B->ncol = ncol = A->ncol; Astore = (NCformat *) A->Store; Bstore = (NCformat *) B->Store; Bstore->nnz = nnz = Astore->nnz; for (i = 0; i < nnz; ++i) ((complex *)Bstore->nzval)[i] = ((complex *)Astore->nzval)[i]; for (i = 0; i < nnz; ++i) Bstore->rowind[i] = Astore->rowind[i]; for (i = 0; i <= ncol; ++i) Bstore->colptr[i] = Astore->colptr[i];}voidcCreate_Dense_Matrix(SuperMatrix *X, int m, int n, complex *x, int ldx, Stype_t stype, Dtype_t dtype, Mtype_t mtype){ DNformat *Xstore; X->Stype = stype; X->Dtype = dtype; X->Mtype = mtype; X->nrow = m; X->ncol = n; X->Store = (void *) SUPERLU_MALLOC( sizeof(DNformat) ); if ( !(X->Store) ) ABORT("SUPERLU_MALLOC fails for X->Store"); Xstore = (DNformat *) X->Store; Xstore->lda = ldx; Xstore->nzval = (complex *) x;}voidcCopy_Dense_Matrix(int M, int N, complex *X, int ldx, complex *Y, int ldy){/* * * Purpose * ======= * * Copies a two-dimensional matrix X to another matrix Y. */ int i, j; for (j = 0; j < N; ++j) for (i = 0; i < M; ++i) Y[i + j*ldy] = X[i + j*ldx];}voidcCreate_SuperNode_Matrix(SuperMatrix *L, int m, int n, int nnz, complex *nzval, int *nzval_colptr, int *rowind, int *rowind_colptr, int *col_to_sup, int *sup_to_col, Stype_t stype, Dtype_t dtype, Mtype_t mtype){ SCformat *Lstore; L->Stype = stype; L->Dtype = dtype; L->Mtype = mtype; L->nrow = m; L->ncol = n; L->Store = (void *) SUPERLU_MALLOC( sizeof(SCformat) ); if ( !(L->Store) ) ABORT("SUPERLU_MALLOC fails for L->Store"); Lstore = L->Store; Lstore->nnz = nnz; Lstore->nsuper = col_to_sup[n]; Lstore->nzval = nzval; Lstore->nzval_colptr = nzval_colptr; Lstore->rowind = rowind; Lstore->rowind_colptr = rowind_colptr; Lstore->col_to_sup = col_to_sup; Lstore->sup_to_col = sup_to_col;}/* * Convert a row compressed storage into a column compressed storage. */voidcCompRow_to_CompCol(int m, int n, int nnz, complex *a, int *colind, int *rowptr, complex **at, int **rowind, int **colptr){ register int i, j, col, relpos; int *marker; /* Allocate storage for another copy of the matrix. */ *at = (complex *) complexMalloc(nnz); *rowind = (int *) intMalloc(nnz); *colptr = (int *) intMalloc(n+1); marker = (int *) intCalloc(n); /* Get counts of each column of A, and set up column pointers */ for (i = 0; i < m; ++i) for (j = rowptr[i]; j < rowptr[i+1]; ++j) ++marker[colind[j]]; (*colptr)[0] = 0; for (j = 0; j < n; ++j) { (*colptr)[j+1] = (*colptr)[j] + marker[j]; marker[j] = (*colptr)[j]; } /* Transfer the matrix into the compressed column storage. */ for (i = 0; i < m; ++i) { for (j = rowptr[i]; j < rowptr[i+1]; ++j) { col = colind[j]; relpos = marker[col]; (*rowind)[relpos] = i; (*at)[relpos] = a[j]; ++marker[col]; } } SUPERLU_FREE(marker);}voidcPrint_CompCol_Matrix(char *what, SuperMatrix *A){ NCformat *Astore; register int i,n; float *dp; printf("\nCompCol matrix %s:\n", what); printf("Stype %d, Dtype %d, Mtype %d\n", A->Stype,A->Dtype,A->Mtype); n = A->ncol; Astore = (NCformat *) A->Store; dp = (float *) Astore->nzval; printf("nrow %d, ncol %d, nnz %d\n", A->nrow,A->ncol,Astore->nnz); printf("nzval: "); for (i = 0; i < 2*Astore->colptr[n]; ++i) printf("%f ", dp[i]); printf("\nrowind: "); for (i = 0; i < Astore->colptr[n]; ++i) printf("%d ", Astore->rowind[i]); printf("\ncolptr: "); for (i = 0; i <= n; ++i) printf("%d ", Astore->colptr[i]); printf("\n"); fflush(stdout);}voidcPrint_SuperNode_Matrix(char *what, SuperMatrix *A){ SCformat *Astore; register int i, j, k, c, d, n, nsup; float *dp; int *col_to_sup, *sup_to_col, *rowind, *rowind_colptr; printf("\nSuperNode matrix %s:\n", what); printf("Stype %d, Dtype %d, Mtype %d\n", A->Stype,A->Dtype,A->Mtype); n = A->ncol; Astore = (SCformat *) A->Store; dp = (float *) Astore->nzval; col_to_sup = Astore->col_to_sup; sup_to_col = Astore->sup_to_col; rowind_colptr = Astore->rowind_colptr; rowind = Astore->rowind; printf("nrow %d, ncol %d, nnz %d, nsuper %d\n", A->nrow,A->ncol,Astore->nnz,Astore->nsuper); printf("nzval:\n"); for (k = 0; k <= Astore->nsuper; ++k) { c = sup_to_col[k]; nsup = sup_to_col[k+1] - c; for (j = c; j < c + nsup; ++j) { d = Astore->nzval_colptr[j]; for (i = rowind_colptr[c]; i < rowind_colptr[c+1]; ++i) { printf("%d\t%d\t%e\t%e\n", rowind[i], j, dp[d], dp[d+1]); d += 2; } } }#if 0 for (i = 0; i < 2*Astore->nzval_colptr[n]; ++i) printf("%f ", dp[i]);#endif printf("\nnzval_colptr: "); for (i = 0; i <= n; ++i) printf("%d ", Astore->nzval_colptr[i]); printf("\nrowind: "); for (i = 0; i < Astore->rowind_colptr[n]; ++i) printf("%d ", Astore->rowind[i]); printf("\nrowind_colptr: "); for (i = 0; i <= n; ++i) printf("%d ", Astore->rowind_colptr[i]); printf("\ncol_to_sup: "); for (i = 0; i < n; ++i) printf("%d ", col_to_sup[i]); printf("\nsup_to_col: "); for (i = 0; i <= Astore->nsuper+1; ++i) printf("%d ", sup_to_col[i]); printf("\n"); fflush(stdout);}voidcPrint_Dense_Matrix(char *what, SuperMatrix *A){ DNformat *Astore; register int i, j, lda = Astore->lda; float *dp; printf("\nDense matrix %s:\n", what); printf("Stype %d, Dtype %d, Mtype %d\n", A->Stype,A->Dtype,A->Mtype); Astore = (DNformat *) A->Store; dp = (float *) Astore->nzval; printf("nrow %d, ncol %d, lda %d\n", A->nrow,A->ncol,lda); printf("\nnzval: "); for (j = 0; j < A->ncol; ++j) { for (i = 0; i < 2*A->nrow; ++i) printf("%f ", dp[i + j*2*lda]); printf("\n"); } printf("\n"); fflush(stdout);}/* * Diagnostic print of column "jcol" in the U/L factor. */voidcprint_lu_col(char *msg, int jcol, int pivrow, int *xprune, GlobalLU_t *Glu){ int i, k, fsupc; int *xsup, *supno; int *xlsub, *lsub; complex *lusup; int *xlusup; complex *ucol; int *usub, *xusub; xsup = Glu->xsup; supno = Glu->supno; lsub = Glu->lsub; xlsub = Glu->xlsub; lusup = Glu->lusup; xlusup = Glu->xlusup; ucol = Glu->ucol; usub = Glu->usub; xusub = Glu->xusub; printf("%s", msg); printf("col %d: pivrow %d, supno %d, xprune %d\n", jcol, pivrow, supno[jcol], xprune[jcol]); printf("\tU-col:\n"); for (i = xusub[jcol]; i < xusub[jcol+1]; i++) printf("\t%d%10.4f, %10.4f\n", usub[i], ucol[i].r, ucol[i].i); printf("\tL-col in rectangular snode:\n"); fsupc = xsup[supno[jcol]]; /* first col of the snode */ i = xlsub[fsupc]; k = xlusup[jcol]; while ( i < xlsub[fsupc+1] && k < xlusup[jcol+1] ) { printf("\t%d\t%10.4f, %10.4f\n", lsub[i], lusup[k].r, lusup[k].i); i++; k++; } fflush(stdout);}/* * Check whether tempv[] == 0. This should be true before and after * calling any numeric routines, i.e., "panel_bmod" and "column_bmod". */void ccheck_tempv(int n, complex *tempv){ int i; for (i = 0; i < n; i++) { if ((tempv[i].r != 0.0) || (tempv[i].i != 0.0)) { fprintf(stderr,"tempv[%d] = {%f, %f}\n", i, tempv[i].r, tempv[i].i); ABORT("ccheck_tempv"); } }}voidcGenXtrue(int n, int nrhs, complex *x, int ldx){ int i, j; for (j = 0; j < nrhs; ++j) for (i = 0; i < n; ++i) { x[i + j*ldx].r = 1.0; x[i + j*ldx].i = 0.0; }}/* * Let rhs[i] = sum of i-th row of A, so the solution vector is all 1's */voidcFillRHS(trans_t trans, int nrhs, complex *x, int ldx, SuperMatrix *A, SuperMatrix *B){ NCformat *Astore; complex *Aval; DNformat *Bstore; complex *rhs; complex one = {1.0, 0.0}; complex zero = {0.0, 0.0}; int ldc; char transc[1]; Astore = A->Store; Aval = (complex *) Astore->nzval; Bstore = B->Store; rhs = Bstore->nzval; ldc = Bstore->lda; if ( trans == NOTRANS ) *(unsigned char *)transc = 'N'; else *(unsigned char *)transc = 'T'; sp_cgemm(transc, "N", A->nrow, nrhs, A->ncol, one, A, x, ldx, zero, rhs, ldc);}/* * Fills a complex precision array with a given value. */void cfill(complex *a, int alen, complex dval){ register int i; for (i = 0; i < alen; i++) a[i] = dval;}/* * Check the inf-norm of the error vector */void cinf_norm_error(int nrhs, SuperMatrix *X, complex *xtrue){ DNformat *Xstore; float err, xnorm; complex *Xmat, *soln_work; complex temp; int i, j; Xstore = X->Store; Xmat = Xstore->nzval; for (j = 0; j < nrhs; j++) { soln_work = &Xmat[j*Xstore->lda]; err = xnorm = 0.0; for (i = 0; i < X->nrow; i++) { c_sub(&temp, &soln_work[i], &xtrue[i]); err = SUPERLU_MAX(err, c_abs(&temp)); xnorm = SUPERLU_MAX(xnorm, c_abs(&soln_work[i])); } err = err / xnorm; printf("||X - Xtrue||/||X|| = %e\n", err); }}/* Print performance of the code. */voidcPrintPerf(SuperMatrix *L, SuperMatrix *U, mem_usage_t *mem_usage, float rpg, float rcond, float *ferr, float *berr, char *equed, SuperLUStat_t *stat){ SCformat *Lstore; NCformat *Ustore; double *utime; flops_t *ops; utime = stat->utime; ops = stat->ops; if ( utime[FACT] != 0. ) printf("Factor flops = %e\tMflops = %8.2f\n", ops[FACT], ops[FACT]*1e-6/utime[FACT]); printf("Identify relaxed snodes = %8.2f\n", utime[RELAX]); if ( utime[SOLVE] != 0. ) printf("Solve flops = %.0f, Mflops = %8.2f\n", ops[SOLVE], ops[SOLVE]*1e-6/utime[SOLVE]); Lstore = (SCformat *) L->Store; Ustore = (NCformat *) U->Store; printf("\tNo of nonzeros in factor L = %d\n", Lstore->nnz); printf("\tNo of nonzeros in factor U = %d\n", Ustore->nnz); printf("\tNo of nonzeros in L+U = %d\n", Lstore->nnz + Ustore->nnz); printf("L\\U MB %.3f\ttotal MB needed %.3f\texpansions %d\n", mem_usage->for_lu/1e6, mem_usage->total_needed/1e6, mem_usage->expansions); printf("\tFactor\tMflops\tSolve\tMflops\tEtree\tEquil\tRcond\tRefine\n"); printf("PERF:%8.2f%8.2f%8.2f%8.2f%8.2f%8.2f%8.2f%8.2f\n", utime[FACT], ops[FACT]*1e-6/utime[FACT], utime[SOLVE], ops[SOLVE]*1e-6/utime[SOLVE], utime[ETREE], utime[EQUIL], utime[RCOND], utime[REFINE]); printf("\tRpg\t\tRcond\t\tFerr\t\tBerr\t\tEquil?\n"); printf("NUM:\t%e\t%e\t%e\t%e\t%s\n", rpg, rcond, ferr[0], berr[0], equed); }print_complex_vec(char *what, int n, complex *vec){ int i; printf("%s: n %d\n", what, n); for (i = 0; i < n; ++i) printf("%d\t%f%f\n", i, vec[i].r, vec[i].i); return 0;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -