startup_stm32f10x_hd.s

STM32F107串口，GPIO 测试程序

;******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
;* File Name          : startup_stm32f10x_hd.s
;* Author             : MCD Application Team
;* Version            : V3.1.0
;* Date               : 06/19/2009
;* Description        : STM32F10x High Density Devices vector table for RVMDK 
;*                      toolchain. 
;*                      This module performs:
;*                      - Set the initial SP
;*                      - Set the initial PC == Reset_Handler
;*                      - Set the vector table entries with the exceptions ISR address
;*                      - Configure external SRAM mounted on STM3210E-EVAL board
;*                        to be used as data memory (optional, to be enabled by user)
;*                      - Branches to __main in the C library (which eventually
;*                        calls main()).
;*                      After Reset the CortexM3 processor is in Thread mode,
;*                      priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>   
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************

; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>

Stack_Size      EQU     0x00000400

                AREA    STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem       SPACE   Stack_Size
__initial_sp

__initial_spTop EQU    0x20000400                 ; stack used for SystemInit_ExtMemCtl
                                                  ; always internal RAM used 
                                                  
; <h> Heap Configuration
;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>

Heap_Size       EQU     0x00000200

                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem        SPACE   Heap_Size
__heap_limit

                PRESERVE8
                THUMB


; Vector Table Mapped to Address 0 at Reset
                AREA    RESET, DATA, READONLY
                EXPORT  __Vectors
                EXPORT  __Vectors_End
                EXPORT  __Vectors_Size

__Vectors       DCD     __initial_spTop           ; Top of Stack
                DCD     Reset_Handler             ; Reset Handler
                DCD     NMI_Handler               ; NMI Handler
                DCD     HardFault_Handler         ; Hard Fault Handler
                DCD     MemManage_Handler         ; MPU Fault Handler
                DCD     BusFault_Handler          ; Bus Fault Handler
                DCD     UsageFault_Handler        ; Usage Fault Handler
                DCD     0                         ; Reserved
                DCD     0                         ; Reserved
                DCD     0                         ; Reserved
                DCD     0                         ; Reserved
                DCD     SVC_Handler               ; SVCall Handler
                DCD     DebugMon_Handler          ; Debug Monitor Handler
                DCD     0                         ; Reserved
                DCD     PendSV_Handler            ; PendSV Handler
                DCD     SysTick_Handler           ; SysTick Handler

                ; External Interrupts
                DCD     WWDG_IRQHandler           ; Window Watchdog
                DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
                DCD     TAMPER_IRQHandler         ; Tamper
                DCD     RTC_IRQHandler            ; RTC
                DCD     FLASH_IRQHandler          ; Flash
                DCD     RCC_IRQHandler            ; RCC
                DCD     EXTI0_IRQHandler          ; EXTI Line 0
                DCD     EXTI1_IRQHandler          ; EXTI Line 1
                DCD     EXTI2_IRQHandler          ; EXTI Line 2
                DCD     EXTI3_IRQHandler          ; EXTI Line 3
                DCD     EXTI4_IRQHandler          ; EXTI Line 4
                DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
                DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
                DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
                DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
                DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
                DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
                DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
                DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
                DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
                DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
                DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
                DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
                DCD     TIM1_UP_IRQHandler        ; TIM1 Update
                DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
                DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
                DCD     TIM2_IRQHandler           ; TIM2
                DCD     TIM3_IRQHandler           ; TIM3
                DCD     TIM4_IRQHandler           ; TIM4
                DCD     I2C1_EV_IRQHandler        ; I2C1 Event
                DCD     I2C1_ER_IRQHandler        ; I2C1 Error
                DCD     I2C2_EV_IRQHandler        ; I2C2 Event
                DCD     I2C2_ER_IRQHandler        ; I2C2 Error
                DCD     SPI1_IRQHandler           ; SPI1
                DCD     SPI2_IRQHandler           ; SPI2
                DCD     USART1_IRQHandler         ; USART1
                DCD     USART2_IRQHandler         ; USART2
                DCD     USART3_IRQHandler         ; USART3
                DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
                DCD     RTCAlarm_IRQHandler       ; RTC Alarm through EXTI Line
                DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
                DCD     TIM8_BRK_IRQHandler       ; TIM8 Break
                DCD     TIM8_UP_IRQHandler        ; TIM8 Update
                DCD     TIM8_TRG_COM_IRQHandler   ; TIM8 Trigger and Commutation
                DCD     TIM8_CC_IRQHandler        ; TIM8 Capture Compare
                DCD     ADC3_IRQHandler           ; ADC3
                DCD     FSMC_IRQHandler           ; FSMC
                DCD     SDIO_IRQHandler           ; SDIO
                DCD     TIM5_IRQHandler           ; TIM5
                DCD     SPI3_IRQHandler           ; SPI3
                DCD     UART4_IRQHandler          ; UART4
                DCD     UART5_IRQHandler          ; UART5
                DCD     TIM6_IRQHandler           ; TIM6
                DCD     TIM7_IRQHandler           ; TIM7
                DCD     DMA2_Channel1_IRQHandler  ; DMA2 Channel1
                DCD     DMA2_Channel2_IRQHandler  ; DMA2 Channel2
                DCD     DMA2_Channel3_IRQHandler  ; DMA2 Channel3
                DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
__Vectors_End

__Vectors_Size 	EQU 	__Vectors_End - __Vectors

                AREA    |.text|, CODE, READONLY

; Dummy SystemInit_ExtMemCtl function                
SystemInit_ExtMemCtl     PROC
                EXPORT  SystemInit_ExtMemCtl      [WEAK]
                BX      LR
                ENDP
                
; Reset handler routine
Reset_Handler   PROC
                EXPORT  Reset_Handler             [WEAK]
                IMPORT  __main

                LDR     R0, = SystemInit_ExtMemCtl ; initialize external memory controller
                BLX     R0

                LDR     R1, = __initial_sp        ; restore original stack pointer
                MSR     MSP, R1                   

                LDR     R0, =__main
                BX      R0
                ENDP
                
; Dummy Exception Handlers (infinite loops which can be modified)

NMI_Handler     PROC
                EXPORT  NMI_Handler                [WEAK]
                B       .
                ENDP
HardFault_Handler\
                PROC
                EXPORT  HardFault_Handler          [WEAK]
                B       .
                ENDP
MemManage_Handler\
                PROC
                EXPORT  MemManage_Handler          [WEAK]
                B       .
                ENDP
BusFault_Handler\
                PROC