readme.txt~

这是介绍TinyOS操作系统关键技术的

PCB DECRIPTION: 1.267 inches x 2.582 inches
                4 LAYER PCB 1.0 MM (0.040 inch) FR4
                LAYER SPACING:
                1-2 0.25 MM
                2-3 0.4 MM
                3-4 0.25 MM
                1 oz copper pour, solder plated finish
                DOUBLE SIDE GREEN SOLDER MASK,
                DOUBLE SIDE SILKSCREEN,
                8 MIL MIN TRACE WIDTH AND 8 MIL MIN ISOLATION BOT,IN1,GND
                6 MIL MIN TRACE WIDTH AND 6 MIL MIN ISOLATION TOP
                10 MIL MIN HOLE SIZE

Please use GREEN solder mask

The left side of the board has an inverted-F antenna with 
no surface mount pads.

Solder mask is removed from vias

Questions?
  Please contact Joe Polastre <[e-mail]>
  at 510.388.2112 with any problems or questions

Board layer order: TOP, GND, IN1, BOT

TOP.GBX - Top Copper
GND.GBX - Inner Plane Negative Polarity
IN1.GBX - Inner Plane Positive Polarity
BOT.GBX - Bottom Copper

drill.nc - NC Drill File

SMT.GBX - Surface Mount Top
SMB.GBX - Surface Mount Bottom

SST.GBX - Silk Screen Top
SSB.GBX - Slik Screen Bottom

telos-ti-49fab.dxf - fabrication drawing

Note: TELOS-TI-49.GTD is a GerbTool V10 file that contains the above layers