📄 io.plg
字号:
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
C:\Users\x\Desktop\MY PROJECT\1_IO\Project\Pro\IO.uvproj
Project File Date: 11/02/2011
<h2>Output:</h2>
Build target 'IO'
compiling main.c...
..\..\User\Src\main.c(24): error: #5: cannot open source input file "stm32_eval.h": No such file or directory
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
Target not created
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=956 RO-data=336 RW-data=4 ZI-data=1028
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=472 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Build target 'IO'
compiling main.c...
..\..\User\Src\main.c(6): warning: #223-D: function "GPIO_Configuration" declared implicitly
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
..\Obj\IO.axf: Error: L6218E: Undefined symbol GPIO_Configuration (referred from main.o).
Target not created
Build target 'IO'
compiling main.c...
..\..\User\Src\main.c(3): error: #114: function "GPIO_Configuration" was referenced but not defined
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
Target not created
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=484 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=876 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Load "..\\Obj\\IO.AXF"
* JLink Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).
Set JLink Project File to "C:\Users\x\Desktop\MY PROJECT\1_IO\Project\Pro\JLinkSettings.ini"
JLink info:
------------
DLL: V4.35b, compiled Sep 2 2011 18:34:46
Firmware: J-Link ARM V8 compiled Sep 2 2011 17:54:36
Hardware: V8.00
S/N : 68000019
Feature(s) : RDI, FlashDL, FlashBP, JFlash, GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:
------------
Device: STM32F103ZE
VTarget = 3.319V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=920 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Load "..\\Obj\\IO.AXF"
* JLink Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).
Set JLink Project File to "C:\Users\x\Desktop\MY PROJECT\1_IO\Project\Pro\JLinkSettings.ini"
JLink info:
------------
DLL: V4.35b, compiled Sep 2 2011 18:34:46
Firmware: J-Link ARM V8 compiled Sep 2 2011 17:54:36
Hardware: V8.00
S/N : 68000019
Feature(s) : RDI, FlashDL, FlashBP, JFlash, GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:
------------
Device: STM32F103ZE
VTarget = 3.319V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 1
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=920 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Load "..\\Obj\\IO.AXF"
* JLink Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).
Set JLink Project File to "C:\Users\x\Desktop\MY PROJECT\1_IO\Project\Pro\JLinkSettings.ini"
JLink info:
------------
DLL: V4.35b, compiled Sep 2 2011 18:34:46
Firmware: J-Link ARM V8 compiled Sep 2 2011 17:54:36
Hardware: V8.00
S/N : 68000019
Feature(s) : RDI, FlashDL, FlashBP, JFlash, GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:
------------
Device: STM32F103ZE
VTarget = 3.319V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'IO'
compiling main.c...
compiling stm32f10x_it.c...
assembling startup_stm32f10x_hd.s...
compiling core_cm3.c...
compiling system_stm32f10x.c...
compiling misc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_rcc.c...
linking...
Program Size: Code=928 RO-data=320 RW-data=0 ZI-data=1024
FromELF: creating hex file...
"..\Obj\IO.axf" - 0 Error(s), 0 Warning(s).
Load "..\\Obj\\IO.AXF"
Load "..\\Obj\\IO.AXF"
* JLink Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).
Set JLink Project File to "C:\Users\x\Desktop\MY PROJECT\1_IO\Project\Pro\JLinkSettings.ini"
JLink info:
------------
DLL: V4.35b, compiled Sep 2 2011 18:34:46
Firmware: J-Link ARM V8 compiled Sep 2 2011 17:54:36
Hardware: V8.00
S/N : 68000019
Feature(s) : RDI, FlashDL, FlashBP, JFlash, GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:
------------
Device: STM32F103ZE
VTarget = 3.319V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -