📄 west-console.txt
字号:
west:~# namedwest:~# route delete -net 192.0.2.0 netmask 255.255.255.0west:~# route delete -net defaultwest:~# route add -net default gw 192.1.2.23west:~# ipsec setup startipsec_setup: Starting Openswan IPsec VERSIONwest:~# ipsec auto --add us-to-anyonewest:~# /testing/pluto/basic-pluto-01/eroutewait.sh trapwest:~# : let my people go - let all packets not otherwise dealt with out in thewest:~# : clear, despite stoopid routing tricks.west:~# ipsec auto --delete packetdefaultwest:~# ipsec manual --up let-my-people-gowest:~# west:~# grep us-to-anyone /tmp/pluto.log | sed 's/\(Message ID 0x\)[0-9a-f]*/\1FFFFFFFF/'added connection description "us-to-anyone""us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: responding to Main Mode from unknown peer 192.1.2.23"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: STATE_MAIN_R1: sent MR1, expecting MI2"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: STATE_MAIN_R2: sent MR2, expecting MI3"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: Main mode peer ID is ID_IPV4_ADDR: '192.1.2.23'"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: Main mode peer ID is ID_IPV4_ADDR: '192.1.2.23'"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: I did not send a certificate because I do not have one."us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_RSA_SIG cipher=oakley_3des_cbc_192 prf=oakley_md5 group=modp1536}"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: gateway 192.1.2.23 wants connection with 192.0.1.1 as our client, but DNS fails to confirm delegation: RR of type TXT for 1.1.0.192.in-addr.arpa. was not found (tried CNAMEs) "us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: sending encrypted notification INVALID_ID_INFORMATION to 192.1.2.23:500"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: failed to build notification for spisize=0 "us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0xFFFFFFFF (perhaps this is a duplicated packet)"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: sending encrypted notification INVALID_MESSAGE_ID to 192.1.2.23:500"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: failed to build notification for spisize=0 "us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0xFFFFFFFF (perhaps this is a duplicated packet)"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: sending encrypted notification INVALID_MESSAGE_ID to 192.1.2.23:500"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: failed to build notification for spisize=0 "us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===? #1: received Delete SA payload: deleting ISAKMP State #1"us-to-anyone"[1] 192.0.1.0/24=== ...192.1.2.23===?: deleting connection "us-to-anyone" instance with peer 192.1.2.23west:~#west:~#
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -