⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hifn7751var.h

📁 linux下基于加密芯片的加密设备
💻 H
字号:
/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.5 2004/10/15 00:36:07 sam Exp $ *//*	$OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $	*//* * Invertex AEON / Hifn 7751 driver * Copyright (c) 1999 Invertex Inc. All rights reserved. * Copyright (c) 1999 Theo de Raadt * Copyright (c) 2000-2001 Network Security Technologies, Inc. *			http://www.netsec.net * * Please send any comments, feedback, bug-fixes, or feature requests to * software@invertex.com. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products *    derived from this software without specific prior written permission. * * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Effort sponsored in part by the Defense Advanced Research Projects * Agency (DARPA) and Air Force Research Laboratory, Air Force * Materiel Command, USAF, under agreement number F30602-01-2-0537. * */#ifndef __HIFN7751VAR_H__#define __HIFN7751VAR_H__#ifdef __KERNEL__/* * Some configurable values for the driver.  By default command+result * descriptor rings are the same size.  The src+dst descriptor rings * are sized at 3.5x the number of potential commands.  Slower parts * (e.g. 7951) tend to run out of src descriptors; faster parts (7811) * src+cmd/result descriptors.  It's not clear that increasing the size * of the descriptor rings helps performance significantly as other * factors tend to come into play (e.g. copying misaligned packets). */#define	HIFN_D_CMD_RSIZE	24	/* command descriptors */#define	HIFN_D_SRC_RSIZE	((HIFN_D_CMD_RSIZE * 7) / 2)	/* source descriptors */#define	HIFN_D_RES_RSIZE	HIFN_D_CMD_RSIZE	/* result descriptors */#define	HIFN_D_DST_RSIZE	HIFN_D_SRC_RSIZE	/* destination descriptors *//* *  Length values for cryptography */#define HIFN_DES_KEY_LENGTH		8#define HIFN_3DES_KEY_LENGTH		24#define HIFN_MAX_CRYPT_KEY_LENGTH	HIFN_3DES_KEY_LENGTH#define HIFN_IV_LENGTH			8#define	HIFN_AES_IV_LENGTH		16#define HIFN_MAX_IV_LENGTH		HIFN_AES_IV_LENGTH/* *  Length values for authentication */#define HIFN_MAC_KEY_LENGTH		64#define HIFN_MD5_LENGTH			16#define HIFN_SHA1_LENGTH		20#define HIFN_MAC_TRUNC_LENGTH		12#define MAX_SCATTER 64/* * Data structure to hold all 4 rings and any other ring related data. */struct hifn_dma {	/*	 *  Descriptor rings.  We add +1 to the size to accomidate the	 *  jump descriptor.	 */	struct hifn_desc	cmdr[HIFN_D_CMD_RSIZE+1];	struct hifn_desc	srcr[HIFN_D_SRC_RSIZE+1];	struct hifn_desc	dstr[HIFN_D_DST_RSIZE+1];	struct hifn_desc	resr[HIFN_D_RES_RSIZE+1];	struct hifn_command	*hifn_commands[HIFN_D_RES_RSIZE];	u_char			command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND];	u_char			result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT];	u_int32_t		slop[HIFN_D_CMD_RSIZE];	u_int64_t		test_src, test_dst;	/*	 *  Our current positions for insertion and removal from the desriptor	 *  rings. 	 */	int			cmdi, srci, dsti, resi;	volatile int		cmdu, srcu, dstu, resu;	int			cmdk, srck, dstk, resk;};struct hifn_session {	int hs_used;	u_int8_t hs_iv[HIFN_MAX_IV_LENGTH];};#define	HIFN_RING_SYNC(sc, r, i, f)					\	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */#define	HIFN_CMDR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), cmdr, (i), (f))#define	HIFN_RESR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), resr, (i), (f))#define	HIFN_SRCR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), srcr, (i), (f))#define	HIFN_DSTR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), dstr, (i), (f))#define	HIFN_CMD_SYNC(sc, i, f)						\	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */#define	HIFN_RES_SYNC(sc, i, f)						\	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */typedef int bus_size_t;/* * Holds data specific to a single HIFN board. */struct hifn_softc {	struct pci_dev		*sc_dev;	/* device backpointer */	spinlock_t		sc_mtx;		/* per-instance lock */	int			sc_num;		/* for multiple devs */	unsigned long		sc_bar0;	bus_size_t		sc_bar0_lastreg;/* bar0 last reg written */	unsigned long		sc_bar1;	bus_size_t		sc_bar1_lastreg;/* bar1 last reg written */	int			sc_irq;	u_int32_t		sc_dmaier;	u_int32_t		sc_drammodel;	/* 1=dram, 0=sram */	struct hifn_dma		*sc_dma;	dma_addr_t		sc_dma_physaddr;/* physical address of sc_dma */	int			sc_dmansegs;	int32_t			sc_cid;	int			sc_maxses;	int			sc_nsessions;	struct hifn_session	*sc_sessions;	int			sc_ramsize;	int			sc_flags;#define	HIFN_HAS_RNG		0x1	/* includes random number generator */#define	HIFN_HAS_PUBLIC		0x2	/* includes public key support */#define	HIFN_HAS_AES		0x4	/* includes AES support */#define	HIFN_IS_7811		0x8	/* Hifn 7811 part */#define	HIFN_IS_7956		0x10	/* Hifn 7956/7955 don't have SDRAM */	struct timer_list	sc_rngto;	/* for polling RNG */	struct timer_list	sc_tickto;	/* for managing DMA */	int			sc_rngfirst;	int			sc_rnghz;	/* RNG polling frequency */	int			sc_c_busy;	/* command ring busy */	int			sc_s_busy;	/* source data ring busy */	int			sc_d_busy;	/* destination data ring busy */	int			sc_r_busy;	/* result ring busy */	int			sc_active;	/* for initial countdown */	int			sc_needwakeup;	/* ops q'd wating on resources */	int			sc_curbatch;	/* # ops submitted w/o int */	int			sc_suspended;};#define	HIFN_LOCK(_sc)		spin_lock_irqsave(&(_sc)->sc_mtx, l_flags)#define	HIFN_UNLOCK(_sc)	spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags)/* *  hifn_command_t * *  This is the control structure used to pass commands to hifn_encrypt(). * *  flags *  ----- *  Flags is the bitwise "or" values for command configuration.  A single *  encrypt direction needs to be set: * *	HIFN_ENCODE or HIFN_DECODE * *  To use cryptography, a single crypto algorithm must be included: * *	HIFN_CRYPT_3DES or HIFN_CRYPT_DES * *  To use authentication is used, a single MAC algorithm must be included: * *	HIFN_MAC_MD5 or HIFN_MAC_SHA1 * *  By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash. *  If the value below is set, hash values are truncated or assumed *  truncated to 12 bytes: * *	HIFN_MAC_TRUNC * *  Keys for encryption and authentication can be sent as part of a command, *  or the last key value used with a particular session can be retrieved *  and used again if either of these flags are not specified. * *	HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY * *  session_num *  ----------- *  A number between 0 and 2048 (for DRAM models) or a number between  *  0 and 768 (for SRAM models).  Those who don't want to use session *  numbers should leave value at zero and send a new crypt key and/or *  new MAC key on every command.  If you use session numbers and *  don't send a key with a command, the last key sent for that same *  session number will be used. * *  Warning:  Using session numbers and multiboard at the same time *            is currently broken. * *  mbuf *  ---- *  Either fill in the mbuf pointer and npa=0 or *	 fill packp[] and packl[] and set npa to > 0 *  *  mac_header_skip *  --------------- *  The number of bytes of the source_buf that are skipped over before *  authentication begins.  This must be a number between 0 and 2^16-1 *  and can be used by IPsec implementers to skip over IP headers. *  *** Value ignored if authentication not used *** * *  crypt_header_skip *  ----------------- *  The number of bytes of the source_buf that are skipped over before *  the cryptographic operation begins.  This must be a number between 0 *  and 2^16-1.  For IPsec, this number will always be 8 bytes larger *  than the auth_header_skip (to skip over the ESP header). *  *** Value ignored if cryptography not used *** * */struct hifn_operand {	union {#if 0		struct mbuf *m;#endif		struct uio *io;	} u;	void		*map;	bus_size_t	mapsize;	int		nsegs;	struct {	    dma_addr_t  ds_addr;	    int         ds_len;	} segs[MAX_SCATTER];};struct hifn_command {	u_int16_t session_num;	u_int16_t base_masks, cry_masks, mac_masks;	u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH];	int cklen;	int sloplen, slopidx;	struct hifn_operand src;	struct hifn_operand dst;	struct hifn_softc *softc;	struct cryptop *crp;	struct cryptodesc *enccrd, *maccrd;};#define	src_m		src.u.m#define	src_io		src.u.io#define	src_map		src.map#define	src_mapsize	src.mapsize#define	src_segs	src.segs#define	src_nsegs	src.nsegs#define	dst_m		dst.u.m#define	dst_io		dst.u.io#define	dst_map		dst.map#define	dst_mapsize	dst.mapsize#define	dst_segs	dst.segs#define	dst_nsegs	dst.nsegs/* *  Return values for hifn_crypto() */#define HIFN_CRYPTO_SUCCESS	0#define HIFN_CRYPTO_BAD_INPUT	(-1)#define HIFN_CRYPTO_RINGS_FULL	(-2)/************************************************************************** * *  Function:  hifn_crypto * *  Purpose:   Called by external drivers to begin an encryption on the *             HIFN board. * *  Blocking/Non-blocking Issues *  ============================ *  The driver cannot block in hifn_crypto (no calls to tsleep) currently. *  hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough *  room in any of the rings for the request to proceed. * *  Return Values *  ============= *  0 for success, negative values on error * *  Defines for negative error codes are: *   *    HIFN_CRYPTO_BAD_INPUT  :  The passed in command had invalid settings. *    HIFN_CRYPTO_RINGS_FULL :  All DMA rings were full and non-blocking *                              behaviour was requested. * *************************************************************************//* * Convert back and forth from 'sid' to 'card' and 'session' */#define HIFN_CARD(sid)		(((sid) & 0xf0000000) >> 28)#define HIFN_SESSION(sid)	((sid) & 0x000007ff)#define HIFN_SID(crd,ses)	(((crd) << 28) | ((ses) & 0x7ff))#endif /* _KERNEL */struct hifn_stats {	u_int64_t hst_ibytes;	u_int64_t hst_obytes;	u_int32_t hst_ipackets;	u_int32_t hst_opackets;	u_int32_t hst_invalid;	u_int32_t hst_nomem;		/* malloc or one of hst_nomem_* */	u_int32_t hst_abort;	u_int32_t hst_noirq;		/* IRQ for no reason */	u_int32_t hst_totbatch;		/* ops submitted w/o interrupt */	u_int32_t hst_maxbatch;		/* max ops submitted together */	u_int32_t hst_unaligned;	/* unaligned src caused copy */	/*	 * The following divides hst_nomem into more specific buckets.	 */	u_int32_t hst_nomem_map;	/* bus_dmamap_create failed */	u_int32_t hst_nomem_load;	/* bus_dmamap_load_* failed */	u_int32_t hst_nomem_mbuf;	/* MGET* failed */	u_int32_t hst_nomem_mcl;	/* MCLGET* failed */	u_int32_t hst_nomem_cr;		/* out of command/result descriptor */	u_int32_t hst_nomem_sd;		/* out of src/dst descriptors */};#endif /* __HIFN7751VAR_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -