📄 if_arp.h
字号:
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the ARP (RFC 826) protocol.
*
* Version: @(#)if_arp.h 1.0.2 08/12/96
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
* Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
* Ross Biro, <bir7@leland.Stanford.Edu>
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Florian La Roche,
* Jonathan Layes, <layes@loran.com>
* Lawrence V. Stefani, <stefani@lkg.dec.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_ARP_H
#define _LINUX_IF_ARP_H
#include <linux/netdevice.h>
/* ARP protocol HARDWARE identifiers. */
#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */
#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */
#define ARPHRD_EETHER 2 /* Experimental Ethernet */
#define ARPHRD_AX25 3 /* AX.25 Level 2 */
#define ARPHRD_PRONET 4 /* PROnet token ring */
#define ARPHRD_CHAOS 5 /* Chaosnet */
#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */
#define ARPHRD_ARCNET 7 /* ARCnet */
#define ARPHRD_APPLETLK 8 /* APPLEtalk */
#define ARPHRD_DLCI 15 /* Frame Relay DLCI */
#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */
/* Dummy types for non ARP hardware */
#define ARPHRD_SLIP 256
#define ARPHRD_CSLIP 257
#define ARPHRD_SLIP6 258
#define ARPHRD_CSLIP6 259
#define ARPHRD_RSRVD 260 /* Notional KISS type */
#define ARPHRD_ADAPT 264
#define ARPHRD_PPP 512
#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
#define ARPHRD_TUNNEL6 769 /* IPIP6 tunnel */
#define ARPHRD_FRAD 770 /* Frame Relay Access Device */
#define ARPHRD_SKIP 771 /* SKIP vif */
#define ARPHRD_LOOPBACK 772 /* Loopback device */
#define ARPHRD_LOCALTLK 773 /* Localtalk device */
#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */
/* ARP protocol opcodes. */
#define ARPOP_REQUEST 1 /* ARP request */
#define ARPOP_REPLY 2 /* ARP reply */
#define ARPOP_RREQUEST 3 /* RARP request */
#define ARPOP_RREPLY 4 /* RARP reply */
/* ARP ioctl request. */
struct arpreq {
struct sockaddr arp_pa; /* protocol address */
struct sockaddr arp_ha; /* hardware address */
int arp_flags; /* flags */
struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
char arp_dev[16];
};
struct arpreq_old {
struct sockaddr arp_pa; /* protocol address */
struct sockaddr arp_ha; /* hardware address */
int arp_flags; /* flags */
struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
};
/* ARP Flag values. */
#define ATF_COM 0x02 /* completed entry (ha valid) */
#define ATF_PERM 0x04 /* permanent entry */
#define ATF_PUBL 0x08 /* publish entry */
#define ATF_USETRAILERS 0x10 /* has requested trailers */
#define ATF_NETMASK 0x20 /* want to use a netmask (only
for proxy entries) */
/*
* This structure defines an ethernet arp header.
*/
struct arphdr
{
unsigned short ar_hrd; /* format of hardware address */
unsigned short ar_pro; /* format of protocol address */
unsigned char ar_hln; /* length of hardware address */
unsigned char ar_pln; /* length of protocol address */
unsigned short ar_op; /* ARP opcode (command) */
#if 0
/*
* Ethernet looks like this : This bit is variable sized however...
*/
unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */
unsigned char ar_sip[4]; /* sender IP address */
unsigned char ar_tha[ETH_ALEN]; /* target hardware address */
unsigned char ar_tip[4]; /* target IP address */
#endif
};
/* Support for the user space arp daemon, arpd */
#define ARPD_UPDATE 0x01
#define ARPD_LOOKUP 0x02
#define ARPD_FLUSH 0x03
struct arpd_request
{
unsigned short req; /* request type */
__u32 ip; /* ip address of entry */
unsigned long dev; /* Device entry is tied to */
unsigned long stamp;
unsigned long updated;
unsigned char ha[MAX_ADDR_LEN]; /* Hardware address */
};
#endif /* _LINUX_IF_ARP_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -