serial.h

嵌入式ARM的一些源代码

/*
 * include/linux/serial.h
 *
 * Copyright (C) 1992 by Theodore Ts'o.
 * 
 * Redistribution of this file is permitted under the terms of the GNU 
 * Public License (GPL)
 */

#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H

struct serial_struct {
	int	type;
	int	line;
	int	port;
	int	irq;
	int	flags;
	int	xmit_fifo_size;
	int	custom_divisor;
	int	baud_base;
	unsigned short	close_delay;
	char	reserved_char[2];
	int	hub6;
	unsigned short	closing_wait; /* time to wait before closing */
	unsigned short	closing_wait2; /* no longer used... */
	int	reserved[4];
};

/*
 * For the close wait times, 0 means wait forever for serial port to
 * flush its output.  65535 means don't wait at all.
 */
#define ASYNC_CLOSING_WAIT_INF	0
#define ASYNC_CLOSING_WAIT_NONE	65535

/*
 * These are the supported serial types.
 */
#define PORT_UNKNOWN	0
#define PORT_8250	1
#define PORT_16450	2
#define PORT_16550	3
#define PORT_16550A	4
#define PORT_CIRRUS     5
#define PORT_16650	6
#define PORT_MAX	6

/*
 * Definitions for async_struct (and serial_struct) flags field
 */
#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
				   on the callout port */
#define ASYNC_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
#define ASYNC_SAK	0x0004	/* Secure Attention Key (Orange book) */
#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */

#define ASYNC_SPD_MASK	0x0030
#define ASYNC_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */

#define ASYNC_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
#define ASYNC_SPD_CUST	0x0030  /* Use user-specified divisor */

#define ASYNC_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */

#define ASYNC_FLAGS	0x0FFF	/* Possible legal async flags */
#define ASYNC_USR_MASK 0x0430	/* Legal flags that non-privileged
				 * users can set or reset */

/* Internal flags used only by kernel/chr_drv/serial.c */
#define ASYNC_INITIALIZED	0x80000000 /* Serial port was initialized */
#define ASYNC_CALLOUT_ACTIVE	0x40000000 /* Call out device is active */
#define ASYNC_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
#define ASYNC_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
#define ASYNC_CLOSING		0x08000000 /* Serial port is closing */
#define ASYNC_CTS_FLOW		0x04000000 /* Do CTS flow control */
#define ASYNC_CHECK_CD		0x02000000 /* i.e., CLOCAL */
#define ASYNC_SHARE_IRQ		0x01000000 /* for multifunction cards */

/*
 * Multiport serial configuration structure --- external structure
 */
struct serial_multiport_struct {
	int		irq;
	int		port1;
	unsigned char	mask1, match1;
	int		port2;
	unsigned char	mask2, match2;
	int		port3;
	unsigned char	mask3, match3;
	int		port4;
	unsigned char	mask4, match4;
	int		port_monitor;
	int	reserved[32];
};

/*
 * Serial input interrupt line counters -- external structure
 * Four lines can interrupt: CTS, DSR, RI, DCD
 */
struct serial_icounter_struct {
	int cts, dsr, rng, dcd;
	int reserved[16];
};


#ifdef __KERNEL__
/*
 * This is our internal structure for each serial port's state.
 * 
 * Many fields are paralleled by the structure used by the serial_struct
 * structure.
 *
 * For definitions of the flags field, see tty.h
 */

#include <linux/termios.h>
#include <linux/tqueue.h>

/*
 * Counters of the input lines (CTS, DSR, RI, CD) interrupts
 */
struct async_icount {
	__u32	cts, dsr, rng, dcd;	
};

struct async_struct {
	int			magic;
	int			baud_base;
	int			port;
	int			irq;
	int			flags; 		/* defined in tty.h */
	int			hub6;		/* HUB6 plus one */
	int			type; 		/* UART type */
	struct tty_struct 	*tty;
	int			read_status_mask;
	int			ignore_status_mask;
	int			timeout;
	int			xmit_fifo_size;
	int			custom_divisor;
	int			x_char;	/* xon/xoff character */
	int			close_delay;
	unsigned short		closing_wait;
	unsigned short		closing_wait2;
	int			IER; 	/* Interrupt Enable Register */
	int			MCR; 	/* Modem control register */
	int			MCR_noint; /* MCR with interrupts off */
	unsigned long		event;
	unsigned long		last_active;
	int			line;
	int			count;	    /* # of fd on device */
	int			blocked_open; /* # of blocked opens */
	long			session; /* Session of opening process */
	long			pgrp; /* pgrp of opening process */
	unsigned char 		*xmit_buf;
	int			xmit_head;
	int			xmit_tail;
	int			xmit_cnt;
	struct tq_struct	tqueue;
	struct tq_struct	tqueue_hangup;
	struct termios		normal_termios;
	struct termios		callout_termios;
	struct wait_queue	*open_wait;
	struct wait_queue	*close_wait;
	struct wait_queue	*delta_msr_wait;
	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
	struct async_struct	*next_port; /* For the linked list */
	struct async_struct	*prev_port;
};

#define SERIAL_MAGIC 0x5301

/*
 * The size of the serial xmit buffer is 1 page, or 4096 bytes
 */
#define SERIAL_XMIT_SIZE 4096

/*
 * Events are used to schedule things to happen at timer-interrupt
 * time, instead of at rs interrupt time.
 */
#define RS_EVENT_WRITE_WAKEUP	0

/*
 * Multiport serial configuration structure --- internal structure
 */
struct rs_multiport_struct {
	int		port1;
	unsigned char	mask1, match1;
	int		port2;
	unsigned char	mask2, match2;
	int		port3;
	unsigned char	mask3, match3;
	int		port4;
	unsigned char	mask4, match4;
	int		port_monitor;
};

/* Export to allow PCMCIA to use this - Dave Hinds */
extern int register_serial(struct serial_struct *req);
extern void unregister_serial(int line);
#endif /* __KERNEL__ */
#endif /* _LINUX_SERIAL_H */