vawattgainladlg.cpp

ADE7758校正程序,只需根据需要添加通信子程序

// VaWattGainLCDlg.cpp : implementation file
//

#include "stdafx.h"
#include "Calibration.h"
#include "VaWattGainLADlg.h"
#include "calcomp.h"
#include "interface.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CVaWattGainLADlg property page

IMPLEMENT_DYNCREATE(CVaWattGainLADlg, CPropertyPage)

CVaWattGainLADlg::CVaWattGainLADlg() : CPropertyPage(CVaWattGainLADlg::IDD)
{
	//{{AFX_DATA_INIT(CVaWattGainDlg)
	m_iWATTHR = 0;
	m_iVAHR = 0;
	m_iAPCFDEN = 0;
	m_iVARCFDEN = 0;
	m_iLineCyc = 0;
	m_iAPCFNUM = 1;
	m_dAPCFEXP = 0.0;
	m_iVARCFNUM = 1;
	m_dVARCFEXP = 0.0;
	m_iPHASE = 0;
	m_dMaxCur = 130.0;
	m_dMaxVol = 500.0;
	m_dTestCur = 10.0;
	m_dTestVol = 220.0;
	m_dWLSB = 0.0;
	m_dVALSB = 0.0;
	m_iWDIV = 1;
	m_iVADIV = 1;
	m_iWG = 0;
	m_iVAG = 0;
	//}}AFX_DATA_INIT
#ifdef _DEBUG
	m_iWATTHR = 24008;
	m_iVAHR = 24008;
	m_iAPCFDEN = 277;
	m_iVARCFDEN = 277;
	m_iLineCyc = 511;
#endif

	for (int i=0;i<3;i++)
	{
		iAPCFDEN[i]=0;
		iAPCFNUM[i]=1;
		dAPCFEXP[i]=0.0;
		iWATTHR[i] = 0;
		iVARCFDEN[i]=0;
		iVARCFNUM[i]=1;
		dVARCFEXP[i]=0.0;
		iVAHR[i] = 0;
		iWG[i]=0;
		iVAG[i]=0;
		dWLSB[i]=0.0;
		dVALSB[i]=0.0;
	}
}

CVaWattGainLADlg::~CVaWattGainLADlg()
{
}

void CVaWattGainLADlg::DoDataExchange(CDataExchange* pDX)
{
	CPropertyPage::DoDataExchange(pDX);
	//{{AFX_DATA_MAP(CVaWattGainLADlg)
	DDX_Text(pDX, IDC_EDIT_APCFDEN, m_iAPCFDEN);
	DDX_Text(pDX, IDC_EDIT_APCFNUM, m_iAPCFNUM);
	DDX_Text(pDX, IDC_EDIT_WATTHR, m_iWATTHR);
	DDX_Text(pDX, IDC_EDIT_APCFEXP, m_dAPCFEXP);
	DDX_Text(pDX, IDC_EDIT_VARCFDEN, m_iVARCFDEN);
	DDX_Text(pDX, IDC_EDIT_VAHR, m_iVAHR);
	DDX_Text(pDX, IDC_EDIT_VARCFEXP, m_dVARCFEXP);
	DDX_Text(pDX, IDC_EDIT_VARCFNUM, m_iVARCFNUM);
	DDX_CBIndex(pDX, IDC_COMBO_PHASE, m_iPHASE);
	DDX_Text(pDX, IDC_EDIT_MAXCUR, m_dMaxCur);
	DDX_Text(pDX, IDC_EDIT_MAXVOL, m_dMaxVol);
	DDX_Text(pDX, IDC_EDIT_TESTCUR, m_dTestCur);
	DDX_Text(pDX, IDC_EDIT_TESTVOL, m_dTestVol);
	DDX_Text(pDX, IDC_EDIT_LINECYC, m_iLineCyc);
	DDX_Text(pDX, IDC_EDIT_WG, m_iWG);
	DDX_Text(pDX, IDC_EDIT_WLSB, m_dWLSB);
	DDX_Text(pDX, IDC_EDIT_WDIV, m_iWDIV);
	DDX_Text(pDX, IDC_EDIT_VALSB, m_dVALSB);
	DDX_Text(pDX, IDC_EDIT_VADIV, m_iVADIV);
	DDX_Text(pDX, IDC_EDIT_VAG, m_iVAG);
	//}}AFX_DATA_MAP
}


BEGIN_MESSAGE_MAP(CVaWattGainLADlg, CPropertyPage)
	//{{AFX_MSG_MAP(CVaWattGainLADlg)
	ON_BN_CLICKED(IDC_BUTTON_WRITE, OnButtonWrite)
	ON_BN_CLICKED(IDC_BUTTON_CAL_WVARG, OnButtonCalWvarg)
	ON_CBN_SELCHANGE(IDC_COMBO_PHASE, OnSelchangeComboPhase)
	//}}AFX_MSG_MAP
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CVaWattGainLADlg message handlers

void CVaWattGainLADlg::OnButtonWrite() 
{
	int i;
	UpdateData(TRUE);
	i = m_iPHASE;

	iWATTHR[i] = m_iWATTHR;
	iVAHR[i] = m_iVAHR;
	iAPCFDEN[i] = m_iAPCFDEN;
	iVARCFDEN[i] = m_iVARCFDEN;
	iAPCFNUM[i] = m_iAPCFNUM;
	iVARCFNUM[i] = m_iVARCFNUM;

}

void CVaWattGainLADlg::OnButtonCalWvarg() 
{
	int i;
	double mc = 3200.0;

	UpdateData(TRUE);
	
	// 计算基准频率
	double cfexp = cfref_comp(mc,m_dTestCur, m_dTestVol, 1);
	for (i=0;i<3;i++)
	{
		dAPCFEXP[i] = dVARCFEXP[i] = cfexp;
	}


	// Step 0: Set APCFNUM/APCFDEN, VARCFNUM/VARCFDEN
	SetRegistersAPCF(m_iAPCFNUM, m_iAPCFDEN);
	SetRegistersVARCF(m_iVARCFNUM, m_iVARCFDEN);

	// Step 1 - 4: 
	InitVAWATTGainCalibration_LineMode();

	// Step 5: Setup system for Itest, Vnom and pf = 1
	SetupSystem(m_dTestCur, m_dTestVol, 1);

	// Step 6: Reset status register
	ResetStatusRegister();

	// Step 7: Read all xWATTHR and xVAHR registers
	ReadRegistersWATTHR(iWATTHR);
	ReadRegistersVAHR(iVAHR);

	// 这里actime_comp()调用使用了50Hz的固定频率，如果有变化，可以换成变量
	double actime = actime_comp(m_iLineCyc, 50, 3);

	// Step 8: Calculate xWG and xVAG
	// 计算寄存器的校正值
	for (i=0; i<3; i++)
	{
		iWG[i] = gain_cal2(mc, m_dTestCur, m_dTestVol, actime, iWATTHR[i], m_iWDIV, dWLSB[i]);
		iVAG[i] = gain_cal2(mc, m_dTestCur, m_dTestVol, actime, iVAHR[i], m_iVADIV, dVALSB[i]);
	}

	// Step 9: Write to xWG and xVAG
	// 将计算得到的校正值写入ADE7758的相应寄存器
	WriteRegistersVAWATT(iWG, iVAG);


	// 显示基准频率
	m_dAPCFEXP = dAPCFEXP[m_iPHASE];
	m_dVARCFEXP = dVARCFEXP[m_iPHASE];

	// 显示VAWATT Gain校正结果
	m_iWG = iWG[m_iPHASE];
	m_iVAG = iVAG[m_iPHASE];
	
	m_dWLSB = dWLSB[m_iPHASE];
	m_dVALSB = dVALSB[m_iPHASE];
	UpdateData(FALSE);
	
}

void CVaWattGainLADlg::OnSelchangeComboPhase() 
{
	UpdateData(TRUE);
	int i = m_iPHASE;

	m_dAPCFEXP = dAPCFEXP[i];
	m_iAPCFDEN = iAPCFDEN[i];
	m_iAPCFNUM = iAPCFNUM[i];
	m_iWATTHR = iWATTHR[i];
	m_dVARCFEXP = dVARCFEXP[i];
	m_iVARCFDEN = iVARCFDEN[i];
	m_iVARCFNUM = iVARCFNUM[i];
	m_iVAHR	= iVAHR[i];
	m_iWG = iWG[i];
	m_iVAG = iVAG[i];
	m_dVALSB = dVALSB[i];
	m_dWLSB = dWLSB[i];

	UpdateData(FALSE);
	
}