📄 usb-ohci.h
字号:
/*
* URB OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
*
* usb-ohci.h
*/
static int cc_to_error[16] = {
/* mapping of the OHCI CC status to error codes */
/* No Error */ USB_ST_NOERROR,
/* CRC Error */ USB_ST_CRC,
/* Bit Stuff */ USB_ST_BITSTUFF,
/* Data Togg */ USB_ST_CRC,
/* Stall */ USB_ST_STALL,
/* DevNotResp */ USB_ST_NORESPONSE,
/* PIDCheck */ USB_ST_BITSTUFF,
/* UnExpPID */ USB_ST_BITSTUFF,
/* DataOver */ USB_ST_DATAOVERRUN,
/* DataUnder */ USB_ST_DATAUNDERRUN,
/* reservd */ USB_ST_NORESPONSE,
/* reservd */ USB_ST_NORESPONSE,
/* BufferOver */ USB_ST_BUFFEROVERRUN,
/* BuffUnder */ USB_ST_BUFFERUNDERRUN,
/* Not Access */ USB_ST_NORESPONSE,
/* Not Access */ USB_ST_NORESPONSE
};
#include <linux/config.h>
/* ED States */
#define ED_NEW 0x00
#define ED_UNLINK 0x01
#define ED_OPER 0x02
#define ED_DEL 0x04
#define ED_URB_DEL 0x08
/* usb_ohci_ed */
struct ed {
__u32 hwINFO;
__u32 hwTailP;
__u32 hwHeadP;
__u32 hwNextED;
struct ed * ed_prev;
__u8 int_period;
__u8 int_branch;
__u8 int_load;
__u8 int_interval;
__u8 state;
__u8 type;
__u16 last_iso;
struct ed * ed_rm_list;
dma_addr_t dma;
__u32 unused[3];
} __attribute((aligned(32))); /* normally 16, iso needs 32 */
typedef struct ed ed_t;
/* TD info field */
#define TD_CC 0xf0000000
#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
#define TD_EC 0x0C000000
#define TD_T 0x03000000
#define TD_T_DATA0 0x02000000
#define TD_T_DATA1 0x03000000
#define TD_T_TOGGLE 0x00000000
#define TD_R 0x00040000
#define TD_DI 0x00E00000
#define TD_DI_SET(X) (((X) & 0x07)<< 21)
#define TD_DP 0x00180000
#define TD_DP_SETUP 0x00000000
#define TD_DP_IN 0x00100000
#define TD_DP_OUT 0x00080000
#define TD_ISO 0x00010000
#define TD_DEL 0x00020000
/* CC Codes */
#define TD_CC_NOERROR 0x00
#define TD_CC_CRC 0x01
#define TD_CC_BITSTUFFING 0x02
#define TD_CC_DATATOGGLEM 0x03
#define TD_CC_STALL 0x04
#define TD_DEVNOTRESP 0x05
#define TD_PIDCHECKFAIL 0x06
#define TD_UNEXPECTEDPID 0x07
#define TD_DATAOVERRUN 0x08
#define TD_DATAUNDERRUN 0x09
#define TD_BUFFEROVERRUN 0x0C
#define TD_BUFFERUNDERRUN 0x0D
#define TD_NOTACCESSED 0x0F
#define MAXPSW 1
struct td {
__u32 hwINFO;
__u32 hwCBP; /* Current Buffer Pointer */
__u32 hwNextTD; /* Next TD Pointer */
__u32 hwBE; /* Memory Buffer End Pointer */
__u16 hwPSW[MAXPSW];
__u8 unused;
__u8 index;
struct ed * ed;
struct td * next_dl_td;
urb_t * urb;
dma_addr_t td_dma;
dma_addr_t data_dma;
__u32 unused2[2];
} __attribute((aligned(32)));
typedef struct td td_t;
#define OHCI_ED_SKIP (1 << 14)
/*
* The HCCA (Host Controller Communications Area) is a 256 byte
* structure defined in the OHCI spec. that the host controller is
* told the base address of. It must be 256-byte aligned.
*/
#define NUM_INTS 32 /* part of the OHCI standard */
struct ohci_hcca {
__u32 int_table[NUM_INTS]; /* Interrupt ED table */
__u16 frame_no; /* current frame number */
__u16 pad1; /* set to 0 on each frame_no change */
__u32 done_head; /* info returned for an interrupt */
u8 reserved_for_hc[116];
} __attribute((aligned(256)));
/*
* Maximum number of root hub ports.
*/
#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
/*
* This is the structure of the OHCI controller's memory mapped I/O
* region. This is Memory Mapped I/O. You must use the readl() and
* writel() macros defined in asm/io.h to access these!!
*/
struct ohci_regs {
/* control and status registers */
__u32 revision;
__u32 control;
__u32 cmdstatus;
__u32 intrstatus;
__u32 intrenable;
__u32 intrdisable;
/* memory pointers */
__u32 hcca;
__u32 ed_periodcurrent;
__u32 ed_controlhead;
__u32 ed_controlcurrent;
__u32 ed_bulkhead;
__u32 ed_bulkcurrent;
__u32 donehead;
/* frame counters */
__u32 fminterval;
__u32 fmremaining;
__u32 fmnumber;
__u32 periodicstart;
__u32 lsthresh;
/* Root hub ports */
struct ohci_roothub_regs {
__u32 a;
__u32 b;
__u32 status;
__u32 portstatus[MAX_ROOT_PORTS];
} roothub;
} __attribute((aligned(32)));
/* OHCI CONTROL AND STATUS REGISTER MASKS */
/*
* HcControl (control) register masks
*/
#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
/* pre-shifted values for HCFS */
# define OHCI_USB_RESET (0 << 6)
# define OHCI_USB_RESUME (1 << 6)
# define OHCI_USB_OPER (2 << 6)
# define OHCI_USB_SUSPEND (3 << 6)
/*
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
#define OHCI_CLF (1 << 1) /* control list filled */
#define OHCI_BLF (1 << 2) /* bulk list filled */
#define OHCI_OCR (1 << 3) /* ownership change request */
#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
* HcInterruptStatus (intrstatus)
* HcInterruptEnable (intrenable)
* HcInterruptDisable (intrdisable)
*/
#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
#define OHCI_INTR_SF (1 << 2) /* start frame */
#define OHCI_INTR_RD (1 << 3) /* resume detect */
#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
#define OHCI_INTR_OC (1 << 30) /* ownership change */
#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
/* Virtual Root HUB */
struct virt_root_hub {
int devnum; /* Address of Root Hub endpoint */
void * urb;
void * int_addr;
int send;
int interval;
struct timer_list rh_int_timer;
};
/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
/* destination of request */
#define RH_INTERFACE 0x01
#define RH_ENDPOINT 0x02
#define RH_OTHER 0x03
#define RH_CLASS 0x20
#define RH_VENDOR 0x40
/* Requests: bRequest << 8 | bmRequestType */
#define RH_GET_STATUS 0x0080
#define RH_CLEAR_FEATURE 0x0100
#define RH_SET_FEATURE 0x0300
#define RH_SET_ADDRESS 0x0500
#define RH_GET_DESCRIPTOR 0x0680
#define RH_SET_DESCRIPTOR 0x0700
#define RH_GET_CONFIGURATION 0x0880
#define RH_SET_CONFIGURATION 0x0900
#define RH_GET_STATE 0x0280
#define RH_GET_INTERFACE 0x0A80
#define RH_SET_INTERFACE 0x0B00
#define RH_SYNC_FRAME 0x0C80
/* Our Vendor Specific Request */
#define RH_SET_EP 0x2000
/* Hub port features */
#define RH_PORT_CONNECTION 0x00
#define RH_PORT_ENABLE 0x01
#define RH_PORT_SUSPEND 0x02
#define RH_PORT_OVER_CURRENT 0x03
#define RH_PORT_RESET 0x04
#define RH_PORT_POWER 0x08
#define RH_PORT_LOW_SPEED 0x09
#define RH_C_PORT_CONNECTION 0x10
#define RH_C_PORT_ENABLE 0x11
#define RH_C_PORT_SUSPEND 0x12
#define RH_C_PORT_OVER_CURRENT 0x13
#define RH_C_PORT_RESET 0x14
/* Hub features */
#define RH_C_HUB_LOCAL_POWER 0x00
#define RH_C_HUB_OVER_CURRENT 0x01
#define RH_DEVICE_REMOTE_WAKEUP 0x00
#define RH_ENDPOINT_STALL 0x01
#define RH_ACK 0x01
#define RH_REQ_ERR -1
#define RH_NACK 0x00
/* OHCI ROOT HUB REGISTER MASKS */
/* roothub.portstatus [i] bits */
#define RH_PS_CCS 0x00000001 /* current connect status */
#define RH_PS_PES 0x00000002 /* port enable status*/
#define RH_PS_PSS 0x00000004 /* port suspend status */
#define RH_PS_POCI 0x00000008 /* port over current indicator */
#define RH_PS_PRS 0x00000010 /* port reset status */
#define RH_PS_PPS 0x00000100 /* port power status */
#define RH_PS_LSDA 0x00000200 /* low speed device attached */
#define RH_PS_CSC 0x00010000 /* connect status change */
#define RH_PS_PESC 0x00020000 /* port enable status change */
#define RH_PS_PSSC 0x00040000 /* port suspend status change */
#define RH_PS_OCIC 0x00080000 /* over current indicator change */
#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -