📄 collection.fit.rpt
字号:
; Enable INIT_DONE output ; Off ;
; Reserve all unused pins ; As output driving ground ;
; Base pin-out file on sameframe device ; Off ;
+----------------------------------------------+--------------------------+
+-------------------+
; Fitter Equations ;
+-------------------+
The equations can be found in E:/verilog/复件 (2) collection/collection.fit.eqn.
+-----------------+
; Floorplan View ;
+-----------------+
Floorplan report data cannot be output to ASCII.
Please use Quartus II to view the floorplan report data.
+---------------------------------------------------------+
; Fitter Resource Usage Summary ;
+----------------------------------------------------------
; Resource ; Usage ;
+-----------------------------+---------------------------+
; Logic cells ; 59,022 / 10,570 ( 558 % ) ;
; Registers ; 24,704 / 12,566 ( 196 % ) ;
; Total LABs ; 0 / 1,057 ( 0 % ) ;
; Logic cells in carry chains ; 670 ;
; User inserted logic cells ; 0 ;
; I/O pins ; 85 / 346 ( 24 % ) ;
; -- Clock pins ; 0 / 16 ( 0 % ) ;
; Global signals ; 3 ;
; M512s ; 0 / 94 ( 0 % ) ;
; M4Ks ; 0 / 60 ( 0 % ) ;
; M-RAMs ; 0 / 1 ( 0 % ) ;
; Total memory bits ; 0 / 920,448 ( 0 % ) ;
; Total RAM block bits ; 0 / 920,448 ( 0 % ) ;
; DSP block 9-bit elements ; 0 / 48 ( 0 % ) ;
; Global clocks ; 3 / 16 ( 18 % ) ;
; Regional clocks ; 0 / 16 ( 0 % ) ;
; Fast regional clocks ; 0 / 8 ( 0 % ) ;
; DIFFIOCLKs ; 0 / 16 ( 0 % ) ;
; SERDES transmitters ; 0 / 44 ( 0 % ) ;
; SERDES receivers ; 0 / 44 ( 0 % ) ;
; Maximum fan-out node ; iPixClk ;
; Maximum fan-out ; 24676 ;
; Total fan-out ; 233942 ;
; Average fan-out ; 3.96 ;
+-----------------------------+---------------------------+
+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Input Pins ;
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
; Name ; Pin # ; I/O Bank ; Combinational Fan-Out ; Registered Fan-Out ; Global ; Input Register ; Power Up High ; PCI I/O Enabled ; Bus Hold ; Weak Pull Up ; I/O Standard ; Termination ; Location assigned by ;
+------------+------------+----------+-----------------------+--------------------+--------+----------------+---------------+-----------------+----------+--------------+--------------+-------------+----------------------+
; frameValid ; Unassigned ; -- ; 21 ; 0 ; yes ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[0] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[1] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[2] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[3] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[4] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[5] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[6] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iData[7] ; Unassigned ; -- ; 1 ; 0 ; no ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; iPixClk ; Unassigned ; -- ; 24676 ; 0 ; yes ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
; lineValid ; Unassigned ; -- ; 31 ; 0 ; yes ; no ; no ; no ; no ; Off ; LVTTL ; Off ; Fitter ;
+------------+------------+----------+-----------------------+--------------------+--------+----------------+---------------+-----------------+----------+--------------+--------------+-------------+----------------------+
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Output Pins ;
+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
; Name ; Pin # ; I/O Bank ; Output Register ; Output Enable Register ; Power Up High ; Slow Slew Rate ; PCI I/O Enabled ; Open Drain ; Bus Hold ; Weak Pull Up ; Turbo Bit ; I/O Standard ; Current Strength ; Termination ; Location assigned by ;
+--------------+------------+----------+-----------------+------------------------+---------------+----------------+-----------------+------------+----------+--------------+-----------+--------------+------------------+-------------+----------------------+
; Blue[0] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[1] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[2] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[3] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[4] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[5] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[6] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Blue[7] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[0] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[1] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[2] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[3] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[4] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[5] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[6] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Green[7] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[0] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[1] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[2] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[3] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[4] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[5] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[6] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; Red[7] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[0] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[1] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[2] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[3] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[4] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[5] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[6] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[7] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[8] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; XMax[9] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; YMax[0] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
; YMax[1] ; Unassigned ; -- ; no ; no ; no ; no ; no ; no ; no ; Off ; no ; LVTTL ; Default ; Off ; Fitter ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -