config.ini

uclinuxsourcedownload !it is very important!

[Dialog Install Successful]
Show Dialog=TRUE
Title=安装完成
MessageHeader=安装完成
Message0=%s 1.0 已被成功安装
Message1=点击完成结束安装。
Launch App=立即执行 %s 1.0 。
Launch App Checked=TRUE

[Dialog Download]
Show Dialog=TRUE
Title=Firefox 安装 - 下载
Message Download0=安装程序正在下载所需文件。该过程所需时间取决于您的网络连接的速度。
Message Retry0=某些文件 CRC 校验失败，必须重新下载这些文件。

[Dialog Reboot]
; Show Dialog values are:
;   TRUE  - Always show
;   FALSE - Don't show unless at least one component has its reboot show value set
;           to TRUE.  This will not show even if some files were in use and a reboot
;           is necessary.
;   AUTO  - Don't show unless a component has its reboot show value set to
;           TRUE or there was at least one file in use and a reboot is
;           is required for the file to be replaced correctly.
Show Dialog=AUTO

[Check Instance0]
Class Name=MozillaMessageWindow
Window Name=
Process Name=firefox
Pretty Name=Mozilla Firefox
Message=Firefox 下载完成。必须关闭 Mozilla Firefox 才能继续安装。 点击确定以退出 Mozilla Firefox 并开始安装。
Message Full Installer=您必须关闭 Mozilla Firefox 以继续此安装。点击确定以退出 Mozilla Firefox 以继续。
Message wait=正在关闭 Mozilla Firefox。请稍候...

; This key indicates whether or not to close all the windows associated with
; the process id of this app instance window found.
Close All Process Windows=TRUE

; These keys are not normally necessary for checking instances.  They are
; set here because Mozilla requires a way to shut down it's turbo mode.
Extra Cmd0 Reg Key Root=HKEY_LOCAL_MACHINE
Extra Cmd0 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\firefox
Extra Cmd0 Reg Name=
Extra Cmd0 Parameter=-kill

[Check Instance1]
Class Name=Netscape6MessageWindow
Window Name=
Process Name=Netscp.exe
Pretty Name=Netscape
;*** LOCALIZE ME BABY ***
Message=Download of Mozilla Firefox was successful. However, Netscape must be closed to proceed with this installation. Click OK to exit Netscape automatically and to begin installation.
;*** LOCALIZE ME BABY ***
Message Full Installer=Netscape must be closed to proceed with this installation. Click OK to exit Netscape automatically and to begin installation.
;*** LOCALIZE ME BABY ***
Message wait=Shutting down Netscape.  Please wait...

; This key indicates whether or not to close all the windows associated with
; the process id of this app instance window found.
Close All Process Windows=TRUE

; These keys are not normally necessary for checking instances.  They are
; set here because Netscape 6 requires a way to shut down it's turbo mode.
; This will stop at the first one that succeeds (key and file found).
Extra Cmd0 Reg Key Root=HKEY_LOCAL_MACHINE
Extra Cmd0 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\Netscp6.exe
Extra Cmd0 Reg Name=
Extra Cmd0 Parameter=-kill

Extra Cmd1 Reg Key Root=HKEY_LOCAL_MACHINE
Extra Cmd1 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\Netscp.exe
Extra Cmd1 Reg Name=
Extra Cmd1 Parameter=-kill


;DependeeX=Component A means
;  - if Component A gets checked this component gets checked
;  - if Component A gets unchecked this component gets unchecked
;  - if this component is visible it can still be checked/unchecked
;      independantly after Component A has changed its state.  I.e
;      this components checkbox will not be disabled or hidden.
;Dependee0=
;
;DependencyX= is not supported at this time. 
;Dependency0=
;
; Attributes can be the following values:
;
;   The following Attributes can be overridden:
;   ------------------------------------------
;
;   SELECTED      - Component is selected to be installed by default.
;
;   UNSELECTED    - Component is to be displayed unselected in the Options
;                   dialog.  If the component is listed in the non-custom
;                   Setup Type section, it will be assumed to be selected
;                   by default.
;
;   ADDITIONAL    - Component is to be shown in the Additional Options
;                   dialog (2nd Options dialog) instead of the 1st Options
;                   dialog.
;
;   NOTADDITIONAL - Component will be shown (if visible) in the 1st
;                   1st Options dialog rather than the Additional Options
;                   dialog (default).
;
;   VISIBLE       - Component is shown in one of the two Options dialogs
;                   (default).
;
;   INVISIBLE     - Component is not shown in either of the two Options dialogs.
;
;   ENABLED       - Component is to be shown as enabled (not greyed out) in
;                   either of the two Options dialogs.
;                   (default).
;
;   DISABLED      - Component is to be shown as disabled (greyed out) in
;                   either of two Options dialog.
;
;
;   The following attributes cannot be overridden:
;   ---------------------------------------------
;
;   LAUNCHAPP     - Component is downloaded and simply run (like a .exe file)
;                   after all the components have been downloaded and
;                   xpinstall'ed.
;
;   DOWNLOAD_ONLY - Component is to be only downloaded to the ns_temp folder,
;                   then deleted as Setup is quitting.
;
;   FORCE_UPGRADE - Force Upgrade checks for a particular file or directory
;                   provided in the Force Upgrade FileX= key(s).  If any of
;                   the listed file or directory exists, then this component
;                   will have its SELECTED and DISABLED Attributes set
;                   automatically.  Force Upgrade will override the following:
;
;                       Random Install Percentage= setting
;                       UNSELECTED Attribute setting
;                       Dependency settings
;                       Dependee settings
;                       Setup Type settings - meaning that even if this
;                                             component is not listed in the
;                                             selected Setup Type, it will be
;                                             affected.
;
;   IGNORE_DOWNLOAD_ERROR  - If the component needs to be downloaded from a
;                            server, setting this attribute will indicate that
;                            any download error encountered will be ignored
;                            and treated as if there were no error.
;                            If the component does not need to be downloaded,
;                            then this attribute has no effect.
;
;   IGNORE_XPINSTALL_ERROR - If the component is a .xpi file, then any error
;                            resulting from the installation of the .xpi file
;                            will be ignored.  If the .xpi file is not to be
;                            installed, then this attribute is ignored.
;
;   SUPERSEDE     - Component is to be shown as disabled and unselected
;                   if a file exists.
;                   Use SupersedeType=File Exists to specify the type of comparison
;                   Use SupersedeFileX=File Name to specify the file
;                   Use SupersedeMinVersionX=a.b.c.d (optional) to specify the 
;                   minimum version of the file.  If the version of the existing file
;                   is greater than or equal to the SupersedeMinVersion the component
;                   will be superseded.
;

;We're not installing Component XPCOM because we're using it
;for it's xpinstall engine from the TEMP dir.  The files that
;this component has are already in Component GRE.
[Component XPCOM]
Description Short=跨平台 COM
Description Long=跨平台 COM
Archive=xpcom.xpi
Install Size=32
Install Size System=1
Install Size Archive=709
Attributes=SELECTED|INVISIBLE
FileCount=      9

[Component Browser]
Description Short=Firefox 浏览器
Description Long=Firefox 浏览器
Archive=browser.xpi
Install Size=32
Install Size System=1
Install Size Archive=6274
Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE|MAIN_COMPONENT
Force Upgrade File0=[SETUP PATH]\firefox
FileCount=    111

[Component ADT]
Description Short=开发工具
Description Long=DOM 查看器 - 网页开发人员的工具.
Archive=adt.xpi
Install Size=32
Install Size System=1
Install Size Archive=120
Attributes=FORCE_UPGRADE|VISIBLE
;Force Upgrade File0=[SETUP PATH]\chrome\venkman.jar
Force Upgrade File0=[SETUP PATH]\chrome\inspector.jar
FileCount=      7

[Component Help]
Description Short=Firefox 帮助
Description Long=Firefox 帮助
Archive=help.xpi
Install Size=32
Install Size System=1
Install Size Archive=88
Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE
Force Upgrade File0=[SETUP PATH]\chrome\help.jar
FileCount=      1

[Component Uninstaller]
Description Short=mozilla.org 反安装程序
Description Long=mozilla.org 反安装程序
Archive=UninstallFirefox.zip
Install Size=1
Install Size System=1
Install Size Archive=1
Attributes=SELECTED|INVISIBLE|DOWNLOAD_ONLY
FileCount=      0

;Since the uninstaller program is going to be installed into the Windows folder,
;Setup.exe needs to know to calculate the disk space required for the Windows folder.
;This section overrides the default user-chosen path for the Uninstaller only.
[Component Uninstaller-Destination Path0]
Path=[WINDIR]

[Component Langpack]
Description Short=zh-CN 语言包
Description Long=zh-CN 语言包
Archive=zh-CN.xpi
Install Size=32
Install Size System=1
Install Size Archive=140
Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE
Force Upgrade File0=[SETUP PATH]\chrome\zh-CN.jar
FileCount=     23

[Component QFA]
Description Short=质量问题反馈代理
Description Long=于汇报 Firefox 崩溃信息
Archive=talkback.xpi
Install Size=32
Install Size System=1
Install Size Archive=788
Attributes=SELECTED|FORCE_UPGRADE
Force Upgrade File0=[SETUP PATH]\components\fullsoft.dll
FileCount=      6

; This is to randomly set the default checkbox for this component.
; This particular value will set the checkbox checked [number]% of the time.
; This logic is done only during the initialization of setup, not in any
; particular dialog.
Random Install Percentage=20

[Core]
Source=[XPI PATH]\xpcom.xpi
Destination=[WIZTEMP]\xpcom.ns
Install Size=33
Install Size System=0
Message=准备安装，请稍候...
; Status= values: Disabled, Enabled
; If nothing is set, default value is Enabled.  If set to Disabled,
; it will then use GRE as the xpinstall engine, in which case, there
; should be a GRE component in this installer package!
Status=Enabled

[Redirect]
Status=Disabled
; This is used in conjunction with the Site Selector info to build a
; url to where to download the needed redirect.ini file from.
; If there's more than one server path, they will be used as fail
; over paths.
;
; The Server Path= keys need to be named in the following convention:
;
;   Server Path0=
;   Server Path1=
;   Server Path2=
;
; and so on...
Server Path=redirect.ini
;*** LOCALIZE ME BABY ***
Description=Redirect File
Message=


; The Timing key needs to be one of the following values:
;   pre download     - process before any files have been downloaded.
;   post download    - process after all files have been downloaded.
;   pre xpcom        - process before the xpcom file has been uncompressed.
;   post xpcom       - process after the xpcom file has been uncompressed.
;   pre smartupdate  - process before the smartupdate engine has been launched.
;   post smartupdate - process after the smartupdate engine has been launched.
;   pre launchapp    - process before the launching of executables.
;   post launchapp   - process after the launching of executables.
;   pre archive      - process before the launching of each individual archive file.
;   post archive     - process after the launching of each individual archive file.
;   depend reboot    - process depending on if a reboot is necessary or not.
;                      if reboot is necessary, installer can set it up so
;                      the app runs once upon windows reboot.

;Uncompress FileX sections
[Uncompress File0]
Timing=post smartupdate
Source=[XPI PATH]\UninstallFirefox.zip
Destination=[WINDIR]
;*** LOCALIZE ME BABY ***
Message=正在安装反安装程序，请稍候...
Only If Exists=FALSE


;Copy FileX sections
;Copy the uninstaller to the [Setup Path]\uninstall folder.
;This copy is to be used when the user installed on a system with
;restricted access.
[Copy File0]
Timing=post smartupdate
Source=[WINDIR]\UninstallFirefox
Destination=[SETUP PATH]\uninstall
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File1]
Timing=post smartupdate
Source=[XPI PATH]\UninstallFirefox
Destination=[WINDIR]
Fail If Exists=FALSE
Do Not Uninstall=TRUE

; nss3.dll, softokn3.dll, ssl3.dll, and smime3.dll all need to be copied from
; the GRE dir to the destination app folder (see bug 202326)
[Copy File2]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\nss3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File3]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\softokn3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File4]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\softokn3.chk
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File5]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\ssl3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File6]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\smime3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Path Lookup $GRE_INSTALL_DIR]
Path Reg Key Root=HKEY_LOCAL_MACHINE
Path Reg Key=Software\mozilla.org\GRE\\Main
Path Reg Name=Install Directory
Strip Filename=FALSE


;Copy File SequentialX sections
[Copy File Sequential0]
Timing=post smartupdate
Filename=install_wizard.log
Source=[SETUP PATH]
Destination=[SETUP PATH]\uninstall


;Create DirectoryX sections
[Create Directory0]
Timing=post download