readme.txt

mb90340的擦写FLASH区小小 程序

==========================================================================
                        90340_flashcan100p340
==========================================================================
                   Fujitsu Microelectronics Europe GmbH                       
                 http://emea.fujitsu.com/microelectronics 
                                                            
 The following  software  is for  demonstration  purposes only.  It is not
 fully  tested, nor validated  in order  to fullfill  its task  under  all
 circumstances.  Therefore,  this software or  any part of it must only be
 used in an evaluation laboratory environment.                        
 This software is subject to the rules of our standard DISCLAIMER, that is
 delivered with our  SW-tools on the Fujitsu Microcontrollers CD 
 (V3.4 or higher "\START.HTM") or on our Internet Pages:
 http://www.fme.gsdc.de/gsdc.htm
 http://emea.fujitsu.com/microelectronics 
==========================================================================
               
History
Date      Ver   Author  Softune     Description
24.01.03  1.0   HW      V30L28      original version
11.02.03  1.1   HW      V30L29	    new header files
06.10.03  1.2   DFi     V30L29	    changed PLL factor from x6 to x4
17.08.05  1.3   JMo                 uart-bug fixed
22.02.06  1.3   HWe     V30L32      Clear error flags corrected (CRE=1)
==========================================================================

This is Demoproject for Flash-Can-100P-340 Evaluation-Board. 
It includes some basic settings for e.g. Linker, C-Compiler 
which must be checked and modified in detail, 
corresponding to the user application.

Description:
1) running LED light on User-LEDs (P00-P07)
2) initialisation of UART0 (UART"A") and send out welcome-string (9600Baud)
3) initialisation of UART2 (UART"B") and send out welcome-string (9600Baud)
4) initialisation of optional LCD at P00-P07 (same as LED-Port !) 
5) Each character received via UART0 (UART"A") will be echoed
6) Each character received via UART2 (UART"B") will be echoed
7) Key-buttons INT0, INT1, TIN1, IN0 and ADTG will be confirmed by UART-message
8) Received UART"B"-data will be send to CAN0 (CAN"A") to ID #3
9) All received CAN0 (CAN"A")-data will be send to UART "B"

   UART initialized to 9600Baud @ 16MHz (4Mhz crystal)
   CAN  initialized to 100Kbit  @ 16MHz (4Mhz crystal)