readme.txt

mb90340的串口接收发送小小 程序

==========================================================================
                             90340_uart0_async
==========================================================================
                   Fujitsu Microelectronics Europe GmbH                       
                 http://emea.fujitsu.com/microelectronics 
                                                            
 The following  software  is for  demonstration  purposes only.  It is not
 fully  tested, nor validated  in order  to fullfill  its task  under  all
 circumstances.  Therefore,  this software or  any part of it must only be
 used in an evaluation laboratory environment.                        
 This software is subject to the rules of our standard DISCLAIMER, that is
 delivered with our  SW-tools on the Fujitsu Microcontrollers CD 
 (V3.4 or higher "\START.HTM") or on our Internet Pages:
 http://www.fme.gsdc.de/gsdc.htm
 http://emea.fujitsu.com/microelectronics 
==========================================================================
               
History
Date      Ver   Author  Softune     Description
11.02.03  1.0   HW      V30L29      created
06.10.03  1.1   DFi     V30L29      changed PLL factor from x6 to x4
17.08.05  1.2   JMo                 uart-bug fixed
22.02.06  1.3   HWe     V30L32      Clear error flags corrected (CRE=1)
==========================================================================

This sample-project is for the MB90340 Series. It includes some basic 
settings for e.g. Linker, C-Compiler which must be checked and modified in 
detail, corresponding to the user application.

Description:
It is a test application to send an welcome string via UART0 
and echoes all received characters. 
Baud rate 9600 @ 16MHz, no parity, 1 stop bit and a data length of 8 bit. 
No interrupts are used.