duojicaidan.txt

实现多级菜单的功能 c51单片机的LCD多级菜单

LCD多级菜单的实现

//ReadMe
//屏宽:112
//屏高:64
＃i nclude <reg51.h>
＃i nclude <intrins.h>
＃i nclude <absacc.h>
//
typedef struct
 {
 unsigned int KeyTab_MenuIndex;  //当前状态索引号
 unsigned int KeyTab_MaxItems;  //本级菜单最大条目数
    unsigned int KeyTab_PressOk;     //按下"回车"键时转向的状态索引号
    unsigned int KeyTab_PressEsc;  //按下"返回"键时转向的状态索引号
    unsigned int KeyTab_PressDown;     //按下"向下"键时转向的状态索引号
    unsigned int KeyTab_PressUp;     //按下"向上"键时转向的状态索引号
 void    (*CurrentOperate)();     //当前状态应该执行的功能操作
 }KeyTabStruct;
void    (*KeyFuncPtr)();    //按键功能指针
//
#define S_S   0x80//上      =1000,0000=0x80,
#define S_X   0x40//下      =0100,0000=0x40,
#define S_Z   0x20//左      =0010,0000=0x20,
#define S_Y   0x10//右      =0001,0000=0x10,
#define S_ZS  0xa0//左上    =1010,0000=0xa0,
#define S_ZX  0x60//左下    =0110,0000=0x60,
#define S_YS  0x90//右上    =1001,0000=0x90,
#define S_YX  0x50//右下    =0101,0000=0x50,
#define S_SXZY  0xf0//上下左右=1111,0000=0xf0
  
//
#define KEY_OK 0x11
#define KEY_UP 0x12
#define KEY_ESC 0x13
//
#define KEY_LEFT 0x21
#define KEY_DOWN 0x22
#define KEY_RIGHT 0x23
//
#define KEY_1  0x31
#define KEY_2  0x32
#define KEY_3  0x33
//
#define KEY_4  0x41
#define KEY_5  0x42
#define KEY_6  0x43
//
#define KEY_7  0x51
#define KEY_8  0x52
#define KEY_9  0x53
//
#define KEY_XING 0x61
#define KEY_0  0x62
#define KEY_JING 0x63
//
#define KEY_POWER 0x71
#define KEY_NULL 0x00
//
//
#define MAX_KEYTABSTRUCT_NUM      19
#define MENU_FACE         0
#define MENU_ROOT         1
#define  MENU_VIEW        2
#define   MENU_VIEW_ABOUTRECORDE    3
#define   MENU_VIEW_HANDSETCLOCK    4
#define  MENU_OPERATION       5
#define   MENU_OPERATION_SETPOSITION   6
#define   MENU_OPERATION_READZJTOFLASH  7
#define   MENU_OPERATION_RDZJTORAM   8
#define   MENU_OPERATION_DELGIVENZL   9
#define   MENU_OPERATION_DELALLZJ    10
#define  MENU_TEST        11
#define   MENU_TEST_RAMTEST     12
#define   MENU_TEST_FLASHTEST     13
#define  MENU_SYSTEMSET       14
#define   MENU_SYSTEMSET_DEBUG    15
#define    MENU_SYSTEMSET_DEBUG_PASSWORD 16
#define    MENU_SYSTEMSET_DEBUG_SEEPICTURE 17
#define   MENU_SYSTEMSET_SETHANDCLK   18
//
#define Addr_Key    0xc000 //1100,0000,0000,0000
#define Addr_XRamBegin1  0x0000 //0000,0000,0000,0000//共32K
#define Addr_XRamEnd1    0x3fff //0011,1111,1111,1111
#define Addr_XRamBegin2  0x4000 //0100,0000,0000,0000
#define Addr_XRamEnd2    0x7fff //0111,1111,1111,1111
#define Addr_XFlashBegin 0x9000//1000,0000,0000,0000 16K/每自然扇区
#define Addr_XFlashEnd  0xbfff//1011,1111,1111,1111
#define Addr_XFlashSector 0xc001//1100,0000,0000,0001 4个自然扇区(把FLASH的地址线移到这个口内容的低位)
//Flash可用容量=4*16K=64K
//自然扇区的内容字节范围(0->3)(0000,0000~0000,0011)共4块=64K,硬件上把A18,A17,A16锁住了，不能写)
//能读不能写的扇区号为4-31为(0000,0100~0001,1111)共28块=448K,可以作为菜单位置
//#define Addr_XFlashBegin     0x9000//1000,0000,0000,0000 16K/每自然扇区
//#define Addr_XFlashEnd  0xbfff//1011,1111,1111,1111
//能读能写的FLASH的连续地址如下:
//#define Addr_XFlashBegin 0x0000//共64K
//#define Addr_XFlashEnd   0xffff
//
//操作FLASH地址时，
//1.算出页地址
//2. 对扇区解锁(读扇区不用解锁):(0x5555)=0xaa,(0x2aaa)=0x55,(0x5555)=0xa0;
//3。把高2位移入[Addr_XFlashSector]=0的低2位，
//4。把原来的高2位置0，再或上10B
//5. 然后整个扇区读/写256字节
//片外数组0x0000~0x1fff;
 unsigned char xdata Rev232Buffer[256]    _at_  0x0000; //->0x00ff
 unsigned char xdata Send232Buffer[256]    _at_  0x0100; //->0x1ff
 #define Addr_FlashWriteBuffer1        0x0200 //->0x2ff
 #define Addr_FlashWriteBuffer2       0x0300 //->0x3ff
 #define Addr_FlashReadBuffer1         0x0400 //->0x4ff
 #define Addr_FlashReadBuffer2       0x0500 //->0x5ff
 #define Addr_ZjWrRdBuffer          0x0800 //->0xfff
 unsigned char xdata clock[12]     _at_  0x1000; //->0x100b
 //
 unsigned char xdata cGraphByte[8]    _at_  0x100e; //->0x1015
 unsigned char xdata * xdata cpGraph    _at_  0x1016; //->0x1017
 signed   char xdata cMenuHLight[0x10]   _at_ 0x1018;
 KeyTabStruct xdata KeyTab[MAX_KEYTABSTRUCT_NUM] _at_ 0x1028;
 unsigned char xdata CxTestByte1     _at_ 0x1145;
//片外单变量0x2000~0x2fff;
 //通讯专用
 unsigned char xdata cUartTemp1   _at_ 0x2000;
 unsigned char xdata cUartTemp2   _at_ 0x2001;
 unsigned char xdata cUartTemp3   _at_ 0x2002;
 unsigned char xdata cUartFunSn   _at_ 0x2003;
 unsigned char xdata cUartDataLenght _at_ 0x2004;
 unsigned char xdata cUartAddSum  _at_ 0x2005;
 unsigned char xdata cUartXorSum  _at_ 0x2006;
 unsigned char xdata iUartTemp1  _at_ 0x2007;
 unsigned char xdata iUartTemp2  _at_ 0x2008;
 unsigned char xdata iUartTemp3  _at_ 0x2009;
 //Flash专用
 unsigned char xdata cPageAddr  _at_ 0x2010;
 unsigned int  xdata iSectorAddr  _at_ 0x2011;
 unsigned int  xdata iFlashToRamAddr _at_ 0x2013;
 unsigned int  xdata iRamToFlashAddr _at_ 0x2015;
 unsigned char xdata iFlashAddrH  _at_ 0x2017;
 unsigned char xdata iFlashAddrM  _at_ 0x2018;
 unsigned char xdata iFlashAddrL  _at_ 0x2019;
 unsigned char xdata iFlashRdWrNum _at_ 0x201a;
 //菜单专用
 unsigned char xdata cMenuTemp1  _at_ 0x2020;
 unsigned char xdata cMenuTemp2  _at_ 0x2021;
 unsigned char xdata cMenuTemp3  _at_ 0x2022;
 //
 unsigned int  xdata iMenuID   _at_ 0x2023;
 unsigned int  xdata iMenuNextID  _at_ 0x2025;
 //
 //画线专用
 unsigned char xdata cLineTemp1  _at_ 0x2030;
 unsigned char xdata cLineTemp2  _at_ 0x2031;
 unsigned char xdata cLineTemp3  _at_ 0x2032;
 unsigned char xdata cLineTemp4  _at_ 0x2033;
 unsigned char xdata cLineTemp5  _at_ 0x2034;
 unsigned char xdata cLineTemp6  _at_ 0x2035;
 unsigned char xdata cLineTemp7  _at_ 0x2036;
 unsigned char xdata cLineTemp8  _at_ 0x2037;
 unsigned char xdata cLineTemp9  _at_ 0x2038;
 unsigned char xdata cLineTemp10  _at_ 0x2039;
 unsigned char xdata cLineTemp11  _at_ 0x203a;
 unsigned char xdata cLineTemp12  _at_ 0x203b;
 unsigned char xdata cLineTemp13  _at_ 0x203c;
 //DispTextLine
 unsigned char xdata cTextLineTemp1 _at_ 0x203d;
 unsigned char xdata cTextLineTemp2 _at_ 0x203e;
 unsigned char xdata cTextLineTemp3 _at_ 0x203f;
 //图形字符专用
 unsigned char xdata cGraphTemp1  _at_ 0x2040;
 unsigned char xdata cGraphTemp2  _at_ 0x2041;
 unsigned char xdata cGraphTemp3  _at_ 0x2042;
 unsigned char xdata cGraphTemp4  _at_ 0x2043;
 //主程序用
 unsigned char xdata NowKey   _at_ 0x2044;
 unsigned char xdata RxPos   _at_ 0x2045;
 unsigned char xdata RxStep   _at_ 0x2046;
 unsigned char xdata RxPrev   _at_ 0x2047;
 unsigned char xdata RxNow   _at_ 0x2048;
 unsigned char xdata RxDataLenght _at_ 0x2049;
 unsigned char xdata TxPos   _at_ 0x204a;
 unsigned char xdata TxNum   _at_ 0x204b;
 //中断0用
 unsigned char xdata cTemp_ex0  _at_ 0x204c;
 //通讯中断用
 unsigned int  xdata i_uart   _at_ 0x204d;
 //写Flash用
 unsigned int  xdata i_FlashWr  _at_ 0x204f;
 unsigned char xdata c1_FlashWr  _at_ 0x2051;
 //读Flash用
 unsigned int  xdata i_FlashRd  _at_ 0x2052;
 unsigned char xdata c1_FlashRd  _at_ 0x2054;
 //Make05Answe专用
 unsigned int  xdata i_Make05Answer   _at_ 0x2055;
 unsigned char xdata cAdd_Make05Answer _at_ 0x2057;
 unsigned char xdata cXor_Make05Answer _at_ 0x2058;
 //读时间用
 unsigned char xdata i_RdTime   _at_ 0x2059;
 //显示文本行用
    unsigned char xdata col_DispTextLine _at_ 0x205a;
 unsigned char code * xdata p_DispTextLine _at_ 0x205b;
 //显示开机画面
 unsigned char xdata i_FaceBmp   _at_ 0x205d;
 unsigned char xdata j_FaceBmp   _at_ 0x205e;
 unsigned char xdata k_FaceBmp   _at_ 0x205f;
 unsigned char xdata c1_FaceBmp   _at_ 0x2060;
 //DisponeTextChar
 unsigned char xdata i_DisponeTextChar _at_ 0x2061;
 unsigned char xdata j_DisponeTextChar _at_ 0x2062;
 unsigned char xdata k_DisponeTextChar _at_ 0x2063;
    unsigned char xdata cTemp_DisponeTextChar _at_ 0x2064;
 //键处理程序专用
    unsigned char xdata cKeyTemp1 _at_ 0x2065;
 //定时器0专用
 unsigned int  xdata iT0_1S   _at_ 0x2066;
 unsigned char xdata cClock_Year  _at_ 0x2068;
 unsigned char xdata cClock_Month _at_ 0x2069;
 unsigned char xdata cClock_Day  _at_ 0x206a;
 unsigned char xdata cClock_Hour  _at_ 0x206b;
 unsigned char xdata cClock_Minute _at_ 0x206c;
 unsigned char xdata cClock_Second _at_ 0x206d;

 //cx


//Timer
#define TH0data 0xb8//20ms=0xb800,1ms=0xfc66
#define TL0data 0x00//
//
sbit LCD_CS=P1^0;
sbit LCD_RESET=P1^1;
sbit LCD_A0=P1^5;
sbit LCD_WR=P1^6;
sbit KEYINT=P3^2;
sbit I2C_SCK=P3^4;
sbit I2C_SDA=P3^5;
//
sbit KEYROW1=P1^5;
sbit KEYROW2=P1^6;
sbit KEYROW3=P1^7;
//
unsigned char bdata BitByte0;
 sbit bOldOnline=BitByte0^7;
 sbit b_ReceiveOver=BitByte0^6;
 sbit b_KeyInt=BitByte0^5;
 sbit b_Arrive1S=BitByte0^4;
unsigned char bdata BitByte1;
unsigned char bdata BitByte2;
unsigned char bdata BitValue;
 sbit bOnline=BitValue^7;
 sbit bPowerOff=BitValue^6;
unsigned char bdata BitValue1;
 sbit bBit7=BitValue1^7;
 sbit bBit6=BitValue1^6;
 sbit bBit5=BitValue1^5;
 sbit bBit4=BitValue1^4;
 sbit bBit3=BitValue1^3;
 sbit bBit2=BitValue1^2;
 sbit bBit1=BitValue1^1;
 sbit bBit0=BitValue1^0;

//
//
void lcd_write_d(unsigned char c1);
void lcd_write_c(unsigned char c1);
void LcdInit();
void MyInit();
//
void DispOneBoxTextChar(unsigned char Row,unsigned char Col,unsigned char c1,unsigned char DispAttrib);
void DispTwoBoxHexChar(unsigned char Row,unsigned char Col,unsigned char c1,unsigned char DispAttrib);
void DispGraphChar(unsigned char Row,unsigned char Col,unsigned char xdata *cArray,unsigned char DispAttrib);
void DispTextLine(unsigned char Row,unsigned char code *MenuText,unsigned char DispAttrib);
//
void ReadyForKey();
void DelayMs(unsigned int iMs);
void UartProcess();
void IAmZj();
void IAmOk();
void IAmUnKnow();
void FlashSectorWr(unsigned int SourceXRamAddr,unsigned int TargetFlashAddr);
void FlashSectorRd(unsigned int SourceFlashAddr,unsigned int TargetXRamAddr);
void Make05Answer();
void Make06Answer();
void I2Cstart(void);
void I2Csend(unsigned char);
unsigned char I2Csuback(void);
void I2Cmastack(void);
unsigned char I2Cread(void);
void I2Cnoack(void);
void I2Cstop(void);
void Make07Answer();
unsigned char set_time();
void Make08Answer();
void MakeBox(unsigned char row1,unsigned char col1,unsigned char row2,unsigned char col2);
void MenuFunctionNull();
void MenuFunctionDemo1();
void MenuFunctionDemo2();
void MenuFunctionDemo3();
void MenuFunctionDemo4();
void MenuFunctionDemo5();
void MenuFunctionDemo6();
void MenuFunctionDemo7();
void MenuFunctionDemo8();
void MenuFunctionDemo9();
void MenuFunctionDemo10();
void MenuFunctionDemo11();
void MenuFunctionDemo12();
void MenuFunctionDemo13();
void MenuFunctionDemo14();
void MenuFunctionDemo15();
void MenuFunctionDemo16();
void MenuFunctionDemo17();
void MenuFunctionDemo18();
void MenuFunctionDemo19();
//
void DispFaceBmp();
void DispMenu_Root();
void DispMenu_View();
void DispMenu_Operation();
void DispMenu_Test();
void DispMenu_SystemSet();
void DispMenu_Debug();
//
void JudgeHLight();
//
unsigned char ReadTime();
void ShowDesktopTime();
//
unsigned char code Echar[96][8];
unsigned char code FaceBmp[112][8];
//
unsigned char code *Menu_Root[4]=
 {
 " View         ",
 " Operation    ",
 " Test         ",
 " System Set   "
 };
unsigned int code Menu_RootID[4]=
 {
 MENU_VIEW,
 MENU_OPERATION,
 MENU_TEST,
 MENU_SYSTEMSET
 };
//
unsigned char code *Menu_View[2]=
 {
 " About ZL     ",
 " HandSet CLK  "
 };
unsigned int code Menu_ViewID[2]=
 {
 MENU_VIEW_ABOUTRECORDE,
 MENU_VIEW_HANDSETCLOCK
 };
//
unsigned char code *Menu_Operation[5]=
 {
 " Set Position ",
 " Rd Zj To ROM ",
 " Rd ZL To Ram ",
 " Del Given ZL ",
 " Del All ZL   "
 };
unsigned int code Menu_OperationID[5]=
 {
 MENU_OPERATION_SETPOSITION,
 MENU_OPERATION_READZJTOFLASH,
 MENU_OPERATION_RDZJTORAM,
 MENU_OPERATION_DELGIVENZL,
 MENU_OPERATION_DELALLZJ
 };
//
unsigned char code *Menu_Test[2]=
 {
 " Ram Test     ",
 " Flash Test   "
 };
unsigned int code Menu_TestID[2]=
 {
 MENU_TEST_RAMTEST,
 MENU_TEST_FLASHTEST
 };
//
unsigned char code *Menu_SystemSet[2]=
 {
 " Debug        ",
 " Set Hand Clk "
 };
unsigned int code Menu_SystemSetID[2]=
 {
 MENU_SYSTEMSET_DEBUG,
 MENU_SYSTEMSET_SETHANDCLK
 };
//
unsigned char code *Menu_Debug[2]=
 {
 " PassWord     ",
 " See Picture  "
 };
unsigned int code Menu_DebugID[2]=
 {
 MENU_SYSTEMSET_DEBUG_PASSWORD,
 MENU_SYSTEMSET_DEBUG_SEEPICTURE
 };
//
unsigned char code MenuNULL[]={"              "};
//
main()
{
 MyInit();
    LcdInit();
 //
 cMenuHLight[0x00]=0x00;
 cMenuHLight[0x01]=0x00;
 cMenuHLight[0x02]=0x00;
 cMenuHLight[0x03]=0x00;
 cMenuHLight[0x04]=0x00;
 cMenuHLight[0x05]=0x00;
 cMenuHLight[0x06]=0x00;
 cMenuHLight[0x07]=0x00;
 cMenuHLight[0x08]=0x00;
 cMenuHLight[0x09]=0x00;
 cMenuHLight[0x0a]=0x00;
 cMenuHLight[0x0b]=0x00;
 cMenuHLight[0x0c]=0x00;
 cMenuHLight[0x0d]=0x00;
 cMenuHLight[0x0e]=0x00;
 cMenuHLight[0x0f]=0x00;
 //
 DelayMs(20);
 //调试用
 MenuFunctionNull();
 //
 Bitvalue="/oblog3/XBYTE[Addr_Key];
 bOldOnline=(~bOnline);
 b_KeyInt=0;
 b_ReceiveOver=0;
 b_Arrive1S=0;
 //
 DispFaceBmp();
 //
 iMenuID=MENU_FACE;
 //
 while(1)
 {
 ReadyForKey();
 //
 BitValue=XBYTE[Addr_Key];
 if(bOldOnline!=bOnline)
  {
  bOldOnline=bOnline;
  if(!bOldOnline)
   {//Line=1
   }
  else
   {//Line=0;
   }
  }
 if(b_ReceiveOver)
  {
  //
  UartProcess();
  //
  b_ReceiveOver=0;
  RxStep=0;
  RxPos=0;
  REN=1;
  }
 //
 if(b_KeyInt)
  {
  switch(NowKey)
   {
   case KEY_OK://KEY_OK,  KEY_UP,  KEY_ESC,
     if(KeyTab[iMenuID].KeyTab_PressOk!=999)
      {
      iMenuID=KeyTab[iMenuID].KeyTab_PressOk;
      iMenuNextID=KeyTab[iMenuID].KeyTab_PressOk;
      JudgeHLight();
      }
     KeyFuncPtr=KeyTab[iMenuID].CurrentOperate;
   "     (*KeyFuncPtr)();    //执行当前按键的操作
     break;
   case KEY_UP:
     if((KeyTab[iMenuID].KeyTab_PressUp!=999)&&(iMenuNextID!=999))
      {
      KeyTab[iMenuID].KeyTab_PressOk=KeyTab[iMenuNextID].KeyTab_PressUp;
      iMenuNextID=KeyTab[iMenuNextID].KeyTab_PressUp;
      JudgeHLight();
      }
     break;
   case KEY_ESC:
     //
     if(KeyTab[iMenuID].KeyTab_PressEsc!=999)
      {
      iMenuID=KeyTab[iMenuID].KeyTab_PressEsc;
      iMenuNextID=KeyTab[iMenuID].KeyTab_PressOk;
      JudgeHLight();
      KeyFuncPtr=KeyTab[iMenuID].CurrentOperate;
         (*KeyFuncPtr)();    //执行当前按键的操作
      }
     break;
     //
   case KEY_LEFT://KEY_LEFT, KEY_DOWN, KEY_RIGHT,
     if((KeyTab[iMenuID].KeyTab_PressUp!=999)&&(iMenuNextID!=999))
      {
      KeyTab[iMenuID].KeyTab_PressOk=KeyTab[iMenuNextID].KeyTab_PressUp;
      iMenuNextID=KeyTab[iMenuNextID].KeyTab_PressUp;
      JudgeHLight();
      }
     break;
   case KEY_DOWN:
     if((KeyTab[iMenuID].KeyTab_PressDown!=999)&&(iMenuNextID!=999))
      {
      KeyTab[iMenuID].KeyTab_PressOk=KeyTab[iMenuNextID].KeyTab_PressDown;
      iMenuNextID=KeyTab[iMenuNextID].KeyTab_PressDown;
      JudgeHLight();
      }
     break;
   case KEY_RIGHT:
     if((KeyTab[iMenuID].KeyTab_PressDown!=999)&&(iMenuNextID!=999))
      {
      KeyTab[iMenuID].KeyTab_PressOk=KeyTab[iMenuNextID].KeyTab_PressDown;
      iMenuNextID=KeyTab[iMenuNextID].KeyTab_PressDown;
      JudgeHLight();
      }
     break;
     //
   case KEY_1://KEY_1,  KEY_2,  KEY_3,
     break;
   case KEY_2:
     break;
   case KEY_3: