6963c基于240128模块c语言参考程序.txt

常用液晶模块选型资料及中文数据手册

/************************************************************************************/
/* LCM（MGLS-240128TA）显示程序              */
/* MCU 型号: Winbond W78E58-24              */
/* 时钟频率: 22.1184 MHz               */
/* 接口方式: 直接接口（挂总线）              */
/* 开发环境: Keil C51 V6.14               */
/************************************************************************************/
#include <absacc.h>
#include <reg52.h>
#include <stdarg.h>
#include <stdio.h>

#define ulong  unsigned long
#define uint  unsigned int
#define uchar  unsigned char

#define STX   0x02
#define ETX   0x03
#define EOT   0x04
#define ENQ   0x05
#define BS   0x08
#define CR   0x0D
#define LF   0x0A
#define DLE   0x10
#define ETB   0x17
#define SPACE  0x20
#define COMMA  0x2C
 
#define TRUE  1
#define FALSE  0
 
#define HIGH  1
#define LOW   0

// T6963C 端口定义
#define LCMDW  XBYTE[0x5000]  // 数据口
#define LCMCW  XBYTE[0x5002]  // 命令口

// T6963C 命令定义
#define LC_CUR_POS 0x21  // 光标位置设置
#define LC_CGR_POS 0x22  // CGRAM偏置地址设置
#define LC_ADD_POS 0x24  // 地址指针位置
#define LC_TXT_STP 0x40  // 文本区首址
#define LC_TXT_WID 0x41  // 文本区宽度
#define LC_GRH_STP 0x42  // 图形区首址
#define LC_GRH_WID 0x43  // 图形区宽度
#define LC_MOD_OR 0x80  // 显示方式：逻辑“或”
#define LC_MOD_XOR 0x81  // 显示方式：逻辑“异或”
#define LC_MOD_AND 0x82  // 显示方式：逻辑“与”
#define LC_MOD_TCH 0x83  // 显示方式：文本特征
#define LC_DIS_SW 0x90  // 显示开关：D0=1/0:光标闪烁启用/禁用；
        //     D1=1/0:光标显示启用/禁用；
        //     D2=1/0:文本显示启用/禁用；
        //     D3=1/0:图形显示启用/禁用；
#define LC_CUR_SHP 0xA0  // 光标形状选择：0xA0-0xA7表示光标占的行数
#define LC_AUT_WR 0xB0  // 自动写设置
#define LC_AUT_RD 0xB1  // 自动读设置
#define LC_AUT_OVR 0xB2  // 自动读/写结束
#define LC_INC_WR 0xC0  // 数据一次写，地址加1
#define LC_INC_RD 0xC1  // 数据一次读，地址加1
#define LC_DEC_WR 0xC2  // 数据一次写，地址减1
#define LC_DEC_RD 0xC3  // 数据一次读，地址减1
#define LC_NOC_WR 0xC4  // 数据一次写，地址不变
#define LC_NOC_RD 0xC5  // 数据一次读，地址不变
#define LC_SCN_RD 0xE0  // 屏读
#define LC_SCN_CP 0xE8  // 屏拷贝
#define LC_BIT_OP 0xF0  // 位操作：D0-D2：定义D0-D7位；D3：1置位；0：清除

code uchar const uPowArr[] = {0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

// ASCII 字模宽度及高度定义
#define ASC_CHR_WIDTH   8
#define ASC_CHR_HEIGHT  12
// ASCII 字模，显示为8*16
char code ASC_MSK[96*12] = {
// Terminal9; 此字体下对应的点阵为：宽x高=8x12
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0xff, // < 0x20时,打印此字
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ' '
0x00,0x0C,0x1E,0x1E,0x1E,0x0C,0x0C,0x00,0x0C,0x0C,0x00,0x00, // '!'
0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // '"'
0x00,0x36,0x36,0x7F,0x36,0x36,0x36,0x7F,0x36,0x36,0x00,0x00, // '#'
0x0C,0x0C,0x3E,0x03,0x03,0x1E,0x30,0x30,0x1F,0x0C,0x0C,0x00, // '$'
0x00,0x00,0x00,0x23,0x33,0x18,0x0C,0x06,0x33,0x31,0x00,0x00, // '%'
0x00,0x0E,0x1B,0x1B,0x0E,0x5F,0x7B,0x33,0x3B,0x6E,0x00,0x00, // '&'
0x00,0x0C,0x0C,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // '''
0x00,0x30,0x18,0x0C,0x06,0x06,0x06,0x0C,0x18,0x30,0x00,0x00, // '('
0x00,0x06,0x0C,0x18,0x30,0x30,0x30,0x18,0x0C,0x06,0x00,0x00, // ')'
0x00,0x00,0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00,0x00,0x00, // '*'
0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00, // '+'
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x06,0x00, // ','
0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00, // '-'
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x00,0x00, // '.'
0x00,0x00,0x40,0x60,0x30,0x18,0x0C,0x06,0x03,0x01,0x00,0x00, // '/'
0x00,0x3E,0x63,0x73,0x7B,0x6B,0x6F,0x67,0x63,0x3E,0x00,0x00, // '0'
0x00,0x08,0x0C,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0x3F,0x00,0x00, // '1'
0x00,0x1E,0x33,0x33,0x30,0x18,0x0C,0x06,0x33,0x3F,0x00,0x00, // '2'
0x00,0x1E,0x33,0x30,0x30,0x1C,0x30,0x30,0x33,0x1E,0x00,0x00, // '3'
0x00,0x30,0x38,0x3C,0x36,0x33,0x7F,0x30,0x30,0x78,0x00,0x00, // '4'
0x00,0x3F,0x03,0x03,0x03,0x1F,0x30,0x30,0x33,0x1E,0x00,0x00, // '5'
0x00,0x1C,0x06,0x03,0x03,0x1F,0x33,0x33,0x33,0x1E,0x00,0x00, // '6'
0x00,0x7F,0x63,0x63,0x60,0x30,0x18,0x0C,0x0C,0x0C,0x00,0x00, // '7'
0x00,0x1E,0x33,0x33,0x37,0x1E,0x3B,0x33,0x33,0x1E,0x00,0x00, // '8'
0x00,0x1E,0x33,0x33,0x33,0x3E,0x18,0x18,0x0C,0x0E,0x00,0x00, // '9'
0x00,0x00,0x00,0x1C,0x1C,0x00,0x00,0x1C,0x1C,0x00,0x00,0x00, // ':'
0x00,0x00,0x00,0x1C,0x1C,0x00,0x00,0x1C,0x1C,0x18,0x0C,0x00, // ';'
0x00,0x30,0x18,0x0C,0x06,0x03,0x06,0x0C,0x18,0x30,0x00,0x00, // '<'
0x00,0x00,0x00,0x00,0x7E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00, // '='
0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x00, // '>'
0x00,0x1E,0x33,0x30,0x18,0x0C,0x0C,0x00,0x0C,0x0C,0x00,0x00, // '?'
0x00,0x3E,0x63,0x63,0x7B,0x7B,0x7B,0x03,0x03,0x3E,0x00,0x00, // '@'
0x00,0x0C,0x1E,0x33,0x33,0x33,0x3F,0x33,0x33,0x33,0x00,0x00, // 'A'
0x00,0x3F,0x66,0x66,0x66,0x3E,0x66,0x66,0x66,0x3F,0x00,0x00, // 'B'
0x00,0x3C,0x66,0x63,0x03,0x03,0x03,0x63,0x66,0x3C,0x00,0x00, // 'C'
0x00,0x1F,0x36,0x66,0x66,0x66,0x66,0x66,0x36,0x1F,0x00,0x00, // 'D'
0x00,0x7F,0x46,0x06,0x26,0x3E,0x26,0x06,0x46,0x7F,0x00,0x00, // 'E'
0x00,0x7F,0x66,0x46,0x26,0x3E,0x26,0x06,0x06,0x0F,0x00,0x00, // 'F'
0x00,0x3C,0x66,0x63,0x03,0x03,0x73,0x63,0x66,0x7C,0x00,0x00, // 'G'
0x00,0x33,0x33,0x33,0x33,0x3F,0x33,0x33,0x33,0x33,0x00,0x00, // 'H'
0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x1E,0x00,0x00, // 'I'
0x00,0x78,0x30,0x30,0x30,0x30,0x33,0x33,0x33,0x1E,0x00,0x00, // 'J'
0x00,0x67,0x66,0x36,0x36,0x1E,0x36,0x36,0x66,0x67,0x00,0x00, // 'K'
0x00,0x0F,0x06,0x06,0x06,0x06,0x46,0x66,0x66,0x7F,0x00,0x00, // 'L'
0x00,0x63,0x77,0x7F,0x7F,0x6B,0x63,0x63,0x63,0x63,0x00,0x00, // 'M'
0x00,0x63,0x63,0x67,0x6F,0x7F,0x7B,0x73,0x63,0x63,0x00,0x00, // 'N'
0x00,0x1C,0x36,0x63,0x63,0x63,0x63,0x63,0x36,0x1C,0x00,0x00, // 'O'
0x00,0x3F,0x66,0x66,0x66,0x3E,0x06,0x06,0x06,0x0F,0x00,0x00, // 'P'
0x00,0x1C,0x36,0x63,0x63,0x63,0x73,0x7B,0x3E,0x30,0x78,0x00, // 'Q'
0x00,0x3F,0x66,0x66,0x66,0x3E,0x36,0x66,0x66,0x67,0x00,0x00, // 'R'
0x00,0x1E,0x33,0x33,0x03,0x0E,0x18,0x33,0x33,0x1E,0x00,0x00, // 'S'
0x00,0x3F,0x2D,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x1E,0x00,0x00, // 'T'
0x00,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x1E,0x00,0x00, // 'U'
0x00,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x1E,0x0C,0x00,0x00, // 'V'
0x00,0x63,0x63,0x63,0x63,0x6B,0x6B,0x36,0x36,0x36,0x00,0x00, // 'W'
0x00,0x33,0x33,0x33,0x1E,0x0C,0x1E,0x33,0x33,0x33,0x00,0x00, // 'X'
0x00,0x33,0x33,0x33,0x33,0x1E,0x0C,0x0C,0x0C,0x1E,0x00,0x00, // 'Y'
0x00,0x7F,0x73,0x19,0x18,0x0C,0x06,0x46,0x63,0x7F,0x00,0x00, // 'Z'
0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00, // '['
0x00,0x00,0x01,0x03,0x06,0x0C,0x18,0x30,0x60,0x40,0x00,0x00, // '\'
0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00, // ']'
0x08,0x1C,0x36,0x63,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // '^'
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00, // '_'
0x0C,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // '`'
0x00,0x00,0x00,0x00,0x1E,0x30,0x3E,0x33,0x33,0x6E,0x00,0x00, // 'a'
0x00,0x07,0x06,0x06,0x3E,0x66,0x66,0x66,0x66,0x3B,0x00,0x00, // 'b'
0x00,0x00,0x00,0x00,0x1E,0x33,0x03,0x03,0x33,0x1E,0x00,0x00, // 'c'
0x00,0x38,0x30,0x30,0x3E,0x33,0x33,0x33,0x33,0x6E,0x00,0x00, // 'd'
0x00,0x00,0x00,0x00,0x1E,0x33,0x3F,0x03,0x33,0x1E,0x00,0x00, // 'e'
0x00,0x1C,0x36,0x06,0x06,0x1F,0x06,0x06,0x06,0x0F,0x00,0x00, // 'f'
0x00,0x00,0x00,0x00,0x6E,0x33,0x33,0x33,0x3E,0x30,0x33,0x1E, // 'g'
0x00,0x07,0x06,0x06,0x36,0x6E,0x66,0x66,0x66,0x67,0x00,0x00, // 'h'
0x00,0x18,0x18,0x00,0x1E,0x18,0x18,0x18,0x18,0x7E,0x00,0x00, // 'i'
0x00,0x30,0x30,0x00,0x3C,0x30,0x30,0x30,0x30,0x33,0x33,0x1E, // 'j'
0x00,0x07,0x06,0x06,0x66,0x36,0x1E,0x36,0x66,0x67,0x00,0x00, // 'k'
0x00,0x1E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00, // 'l'
0x00,0x00,0x00,0x00,0x3F,0x6B,0x6B,0x6B,0x6B,0x63,0x00,0x00, // 'm'
0x00,0x00,0x00,0x00,0x1F,0x33,0x33,0x33,0x33,0x33,0x00,0x00, // 'n'
0x00,0x00,0x00,0x00,0x1E,0x33,0x33,0x33,0x33,0x1E,0x00,0x00, // 'o'
0x00,0x00,0x00,0x00,0x3B,0x66,0x66,0x66,0x66,0x3E,0x06,0x0F, // 'p'
0x00,0x00,0x00,0x00,0x6E,0x33,0x33,0x33,0x33,0x3E,0x30,0x78, // 'q'
0x00,0x00,0x00,0x00,0x37,0x76,0x6E,0x06,0x06,0x0F,0x00,0x00, // 'r'
0x00,0x00,0x00,0x00,0x1E,0x33,0x06,0x18,0x33,0x1E,0x00,0x00, // 's'
0x00,0x00,0x04,0x06,0x3F,0x06,0x06,0x06,0x36,0x1C,0x00,0x00, // 't'
0x00,0x00,0x00,0x00,0x33,0x33,0x33,0x33,0x33,0x6E,0x00,0x00, // 'u'
0x00,0x00,0x00,0x00,0x33,0x33,0x33,0x33,0x1E,0x0C,0x00,0x00, // 'v'
0x00,0x00,0x00,0x00,0x63,0x63,0x6B,0x6B,0x36,0x36,0x00,0x00, // 'w'
0x00,0x00,0x00,0x00,0x63,0x36,0x1C,0x1C,0x36,0x63,0x00,0x00, // 'x'
0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x30,0x18,0x0F, // 'y'
0x00,0x00,0x00,0x00,0x3F,0x31,0x18,0x06,0x23,0x3F,0x00,0x00, // 'z'
0x00,0x38,0x0C,0x0C,0x06,0x03,0x06,0x0C,0x0C,0x38,0x00,0x00, // '{'
0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x00,0x00, // '|'
0x00,0x07,0x0C,0x0C,0x18,0x30,0x18,0x0C,0x0C,0x07,0x00,0x00, // '}'
0x00,0xCE,0x5B,0x73,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // '~'
};

typedef struct typFNT_GB16 // 汉字字模显示数据结构
{
 char Index[2];
 char Msk[32];
};
struct typFNT_GB16 xdata GB_16[] = { // 显示为16*16
"中",0x01,0x00,0x01,0x00,0x21,0x08,0x3F,0xFC,0x21,0x08,0x21,0x08,0x21,0x08,0x21,0x08,0x21,0x08,0x3F,0xF8,0x21,0x08,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,
"文",0x02,0x00,0x01,0x00,0x01,0x00,0xFF,0xFE,0x08,0x20,0x08,0x20,0x08,0x20,0x04,0x40,0x04,0x40,0x02,0x80,0x01,0x00,0x02,0x80,0x04,0x60,0x18,0x1E,0xE0,0x08,0x00,0x00,
"测",0x40,0x02,0x27,0xC2,0x24,0x42,0x84,0x52,0x45,0x52,0x55,0x52,0x15,0x52,0x25,0x52,0x25,0x52,0x25,0x52,0xC5,0x52,0x41,0x02,0x42,0x82,0x42,0x42,0x44,0x4A,0x48,0x04,
"试",0x00,0x20,0x40,0x28,0x20,0x24,0x30,0x24,0x27,0xFE,0x00,0x20,0xE0,0x20,0x27,0xE0,0x21,0x20,0x21,0x10,0x21,0x10,0x21,0x0A,0x29,0xCA,0x36,0x06,0x20,0x02,0x00,0x00,
};

uchar gCurRow,gCurCol; // 当前行、列存储，行高16点，列宽8点

uchar fnGetRow(void)
{
 return gCurRow;
}

uchar fnGetCol(void)
{
 return gCurCol;
}

uchar fnST01(void)  // 状态位STA1,STA0判断（读写指令和读写数据）
{
 uchar i;
 
 for(i=10;i>0;i--)
 {
  if((LCMCW & 0x03) == 0x03)
   break;
 }
 return i; // 若返回零，说明错误
}

uchar fnST2(void)  // 状态位ST2判断（数据自动读状态）
{
 uchar i;
 
 for(i=10;i>0;i--)
 {
  if((LCMCW & 0x04) == 0x04)
   break;
 }
 return i; // 若返回零，说明错误
}

uchar fnST3(void)  // 状态位ST3判断（数据自动写状态）
{
 uchar i;
 
 for(i=10;i>0;i--)
 {
  if((LCMCW & 0x08) == 0x08)
   break;
 }
 return i; // 若返回零，说明错误
}