main.c

杭州立宇泰豪华型44B0开发板

#include <string.h>
#include <stdio.h>
#include "Target\44blib.h"
#include "Target\Def.h"
#include "Target\44b.h"
#include "iictest\iic.h"

void * function[][2]=
{
	(void *)Test_Iic,		    "IIC(AT24LCxx)   ",
	0,0
};


void Isr_Init(void)
{
	rINTCON=0x5;	      //Non-vectored,IRQ enable,FIQ disable //
	rINTMOD=0x0;	      //All=IRQ mode//
	rINTMSK=~(BIT_EINT0 | BIT_GLOBAL);	

}

void Main(void)
{
	char aa;
	int i;
	
	Port_Init();
	Uart_Init(0,115200);
    Isr_Init();//it's needed.
	Led_Display(0xf);
	Delay(0);
	Beep(0x1);
	
	Uart_Select(0); //Select UART0//
	Uart_Printf("\n*************************************************************************");
	Beep(0x0);
	Uart_Printf("\n*                           立宇泰电子                                  *");
	Uart_Printf("\n*                     -S3C44B0X功能部件:IIC测试-                        *");
	Uart_Printf("\n*                          Version 1.21                                 *");    
	Uart_Printf("\n*                     Email:[e-mail]                      *");
	Uart_Printf("\n*             UART Config--COM:115.2kbps,8Bit,NP,UART0                  *");
	Uart_Printf("\n*------------------Begin to Start IIC test,OK? (Y/N)--------------------*");
    
	Led_Display(0x0);
	aa= Uart_Getch();
	if((aa=='Y')||(aa=='y'))
	while(1)
	{
			i=0;
			Uart_Printf("\n");
			while(1)
			{   //display menu
				Uart_Printf("%2d:%s",i+1,function[i][1]);
				i++;
				if((int)(function[i][0])==0)
				{
					Uart_Printf("\n");
					break;
				}
				if((i%4)==0)
					Uart_Printf("\n");
			}
			Uart_Printf("\nSelect the function to test?");
			i=Uart_GetIntNum();
			i--;
			Uart_Printf("\n");
			if(i>=0 && (i<(sizeof(function)/8)) ) 
				( (void (*)(void)) (function[i][0]) )();
	}
}