start12.c

ucos-ii for hc12 in codewarrior

/*****************************************************
      start12.c - standard startup code
   The startup code may be optimized to special user requests
 ----------------------------------------------------
   Copyright (c) Metrowerks, Basel, Switzerland
               All rights reserved
                  Do not modify!

Note: ROM libraries are not implemented in this startup code
Note: C++ destructors of global objects are NOT yet supported in the HIWARE Object File Format.
      To use this feature, please build your application with the ELF object file format.
 *****************************************************/

#include "hidef.h"
#include "start12.h"

/* Macros to control how the startup code handles the COP: */
/* #define _DO_FEED_COP_  : do feed the COP  */
/* #define _DO_ENABLE_COP_: do enable the COP  */
/* #define _DO_DISABLE_COP_: disable the COP */
/* Without defining any of these, the startup code does NOT handle the COP */

#pragma DATA_SEG __NEAR_SEG STARTUP_DATA /* _startupData can be accessed using 16 bit accesses. This is needed because it contains the stack top, and without stack, far data cannot be accessed */
struct _tagStartup _startupData;  /*   read-only: */
                                  /*   _startupData is allocated in ROM and */
                                  /*   initialized by the linker */
#pragma DATA_SEG DEFAULT
#if defined(FAR_DATA)
#include "non_bank.sgm"
/* the init function must be in non banked memory if banked variables are used */
/* because _SET_PAGE is called, which may change any page register. */

#ifdef __cplusplus
  extern "C"
#endif
void _SET_PAGE(void);             /* the inline assembler needs a prototype */
                                  /* this is a runtime routine with a special */
                                  /* calling convention, dont use it in c code! */
static void Init(void);
static void Fini(void);
#else
#include "default.sgm"
#if defined( __BANKED__) || defined(__LARGE__)
static void __far Init(void);
static void __far Fini(void);
#endif /* defined( __BANKED__) || defined(__LARGE__) */
#endif /* FAR_DATA */


/* define value and bits for Windef Register */
#ifdef HC812A4
#define WINDEF (*(volatile unsigned char*) 0x37)
#if defined( __BANKED__) || defined(__LARGE__) || defined(__PPAGE__)
#define __ENABLE_PPAGE__ 0x40
#else
#define __ENABLE_PPAGE__ 0x0
#endif
#if defined(__DPAGE__)
#define __ENABLE_DPAGE__ 0x80
#else
#define __ENABLE_DPAGE__ 0x0
#endif
#if defined(__EPAGE__)
#define __ENABLE_EPAGE__ 0x20
#else
#define __ENABLE_EPAGE__ 0x0
#endif
#endif  /* HC812A4 */

#ifdef _HCS12_SERIALMON
      /* for Monitor based software remap the RAM & EEPROM to adhere
         to EB386. Edit RAM and EEPROM sections in PRM file to match these. */
#define ___INITRM      (*(volatile unsigned char *) 0x0010)
#define ___INITRG      (*(volatile unsigned char *) 0x0011)
#define ___INITEE      (*(volatile unsigned char *) 0x0012)
#endif

#if defined(_DO_FEED_COP_)
#define __FEED_COP_IN_HLI()  } __asm movb #0x55, _COP_RST_ADR; __asm movb #0xAA, _COP_RST_ADR; __asm {
#else
#define __FEED_COP_IN_HLI() /* do nothing */
#endif

#if !defined(FAR_DATA) && (defined( __BANKED__) || defined(__LARGE__))
static void __far Init(void)
#else
static void Init(void)
#endif
 {
/* purpose:     1) zero out RAM-areas where data is allocated   */
/*              2) copy initialization data from ROM to RAM     */
/*              3) call global constructors in C++              */
/*   called from: _Startup, LibInits                            */
   __asm {
ZeroOut:
#if defined(__HIWARE_OBJECT_FILE_FORMAT__) && defined(__LARGE__)
             LDX   _startupData.pZeroOut:1  ; in the large memory model in the HIWARE format, pZeroOut is a 24 bit pointer
#else
             LDX   _startupData.pZeroOut    ; *pZeroOut
#endif
             LDY   _startupData.nofZeroOuts ; nofZeroOuts
             BEQ   CopyDown                 ; if nothing to zero out

NextZeroOut: PSHY                           ; save nofZeroOuts
#ifdef FAR_DATA
             LDAB  1,X+                     ; load page of destination address
             LDY   2,X+                     ; load offset of destination address
             __PIC_JSR(_SET_PAGE)           ; sets the page in the correct page register
#else   /* FAR_DATA */
             LDY   2,X+                     ; start address and advance *pZeroOut (X = X+4)
#endif  /* FAR_DATA */
             LDD   2,X+                     ; byte count
#ifdef  __OPTIMIZE_FOR_SIZE__               /* -os, default */
NextWord:    CLR   1,Y+                     ; clear memory byte
             __FEED_COP_IN_HLI()            ; feed the COP if necessary /*lint !e505 !e522 asm code */
             DBNE  D, NextWord              ; dec byte count
#else
             LSRD                           ; /2 and save bit 0 in the carry
             PSHX
             LDX   #0
LoopClrW:    STX   2,Y+                     ; Word-Clear
             __FEED_COP_IN_HLI()            ; feed the COP if necessary /*lint !e505 !e522 asm code */
             DBNE  D, LoopClrW
             PULX
             BCC   LastClr                  ; handle last byte
             CLR   1,Y+
LastClr:
#endif
             PULY                           ; restore nofZeroOuts
             DEY                            ; dec nofZeroOuts
             BNE  NextZeroOut
CopyDown:
#ifdef __ELF_OBJECT_FILE_FORMAT__
             LDX   _startupData.toCopyDownBeg ; load address of copy down desc.
#else
             LDX   _startupData.toCopyDownBeg:2 ; load address of copy down desc.
#endif
NextBlock:
             LDD   2,X+                     ; size of init-data -> D
             BEQ   funcInits                ; end of copy down desc.
#ifdef FAR_DATA
             PSHD                           ; save counter
             LDAB  1,X+                     ; load destination page
             LDY   2,X+                     ; destination address
             __PIC_JSR(_SET_PAGE)           ; sets the destinations page register
             PULD                           ; restore counter
#else  /* FAR_DATA */
             LDY   2,X+                     ; load destination address
#endif /* FAR_DATA */

#ifdef  __OPTIMIZE_FOR_SIZE__               /* -os, default */
Copy:        MOVB  1,X+,1,Y+                ; move a byte from ROM to the data area
             __FEED_COP_IN_HLI()            ; feed the COP if necessary /*lint !e505 !e522 asm code */
             DBNE  D,Copy                   ; copy-byte loop
#else
             LSRD                           ; /2 and save bit 0 in the carry
Copy:        MOVW  2,X+,2,Y+                ; move a word from ROM to the data area
             __FEED_COP_IN_HLI()            ; feed the COP if necessary /*lint !e505 !e522 asm code */
             DBNE  D,Copy                   ; copy-word loop
             BCC   NextBlock                ; handle last byte?
             MOVB  1,X+,1,Y+                ; copy the last byte
#endif
             BRA   NextBlock
funcInits:                                  ; call of global construtors is only in c++ necessary
#if defined(__cplusplus)
#if defined(__ELF_OBJECT_FILE_FORMAT__)
#if defined( __BANKED__) || defined(__LARGE__)
             LDY   _startupData.nofInitBodies; load number of cpp.
             BEQ   done                     ; if cppcount == 0, goto done
             LDX   _startupData.initBodies  ; load address of first module to initialize
nextInit:
             LEAX   3,X                     ; increment to next init