⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 net.h

📁 ARMboot is a firmware monitor/bootloader for embedded systems based on ARM or StrongARM CPUs
💻 H
字号:
/* *	LiMon Monitor (LiMon) - Network. * *	Copyright 1994 - 2000 Neil Russell. *	(See License) * * * History *	9/16/00	  bor  adapted to TQM823L/STK8xxL board, RARP/TFTP boot added */#ifndef __NET_H__#define __NET_H__/* *	The number of receive packet buffers, and the required packet buffer *	alignment in memory. * */#define PKTBUFSRX	4#define PKTALIGN	32typedef ulong		IPaddr_t;/* * The current receive packet handler.  Called with a pointer to the * application packet, and a protocol type (PORT_BOOTPC or PORT_TFTP). * All other packets are dealt with without calling the handler. */typedef void	rxhand_f(uchar *, unsigned, unsigned, unsigned);/* *	A timeout handler.  Called after time interval has expired. */typedef void	thand_f(void);extern int eth_init(bd_t *bis);			/* Initialize the device	*/extern int eth_send(volatile void *packet, int length);	   /* Send a packet	*/extern int eth_rx(void);			/* Check for received packets	*/extern void eth_halt(void);			/* stop SCC			*//**********************************************************************//* *	Protocol headers. *//* *	Ethernet header */typedef struct {	uchar		et_dest[6];	/* Destination node		*/	uchar		et_src[6];	/* Source node			*/	ushort		et_protlen;	/* Protocol or length		*/	uchar		et_dsap;	/* 802 DSAP			*/	uchar		et_ssap;	/* 802 SSAP			*/	uchar		et_ctl;		/* 802 control			*/	uchar		et_snap1;	/* SNAP				*/	uchar		et_snap2;	uchar		et_snap3;	ushort		et_prot;	/* 802 protocol			*/} Ethernet_t;#define ETHER_HDR_SIZE	14		/* Ethernet header size		*/#define E802_HDR_SIZE	22		/* 802 ethernet header size	*/#define PROT_IP		0x0800		/* IP protocol			*/#define PROT_ARP	0x0806		/* IP ARP protocol		*/#define PROT_RARP	0x8035		/* IP ARP protocol		*/#define IPPROTO_ICMP	 1	/* Internet Control Message Protocol	*/#define IPPROTO_UDP	17	/* User Datagram Protocol		*//* *	Internet Protocol (IP) header. */typedef struct {	uchar		ip_hl_v;	/* header length and version	*/	uchar		ip_tos;		/* type of service		*/	ushort		ip_len;		/* total length			*/	ushort		ip_id;		/* identification		*/	ushort		ip_off;		/* fragment offset field	*/	uchar		ip_ttl;		/* time to live			*/	uchar		ip_p;		/* protocol			*/	ushort		ip_sum;		/* checksum			*/	IPaddr_t	ip_src;		/* Source IP address		*/	IPaddr_t	ip_dst;		/* Destination IP address	*/	ushort		udp_src;	/* UDP source port		*/	ushort		udp_dst;	/* UDP destination port		*/	ushort		udp_len;	/* Length of UDP packet		*/	ushort		udp_xsum;	/* Checksum			*/} IP_t;#define IP_HDR_SIZE_NO_UDP	(sizeof (IP_t) - 8)#define IP_HDR_SIZE		(sizeof (IP_t))/* *	Address Resolution Protocol (ARP) header. */typedef struct{	ushort		ar_hrd;		/* Format of hardware address	*/#   define ARP_ETHER	    1		/* Ethernet  hardware address	*/	ushort		ar_pro;		/* Format of protocol address	*/	uchar		ar_hln;		/* Length of hardware address	*/	uchar		ar_pln;		/* Length of protocol address	*/	ushort		ar_op;		/* Operation			*/#   define ARPOP_REQUEST    1		/* Request  to resolve  address	*/#   define ARPOP_REPLY	    2		/* Response to previous request	*/#   define RARPOP_REQUEST   3		/* Request  to resolve  address	*/#   define RARPOP_REPLY	    4		/* Response to previous request */	/*         * The remaining fields are variable in size, according to         * the sizes above, and are defined as appropriate for         * specific hardware/protocol combinations.	 */	uchar		ar_data[0];#if 0	uchar		ar_sha[];	/* Sender hardware address	*/	uchar		ar_spa[];	/* Sender protocol address	*/	uchar		ar_tha[];	/* Target hardware address	*/	uchar		ar_tpa[];	/* Target protocol address	*/#endif /* 0 */} ARP_t;#define ARP_HDR_SIZE	(8+20)		/* Size assuming ethernet	*//* * ICMP stuff (just enough to handle (host) redirect messages) */#define ICMP_REDIRECT		5	/* Redirect (change route)	*//* Codes for REDIRECT. */#define ICMP_REDIR_NET		0	/* Redirect Net			*/#define ICMP_REDIR_HOST		1	/* Redirect Host		*/typedef struct icmphdr {	uchar		type;	uchar		code;	ushort		checksum;	union {		struct {			ushort	id;			ushort	sequence;		} echo;		ulong	gateway;		struct {			ushort	__unused;			ushort	mtu;		} frag;	} un;} ICMP_t;/* * Maximum packet size; used to allocate packet storage. * TFTP packets can be 524 bytes + IP header + ethernet header. * Lets be conservative, and go for 38 * 16.  (Must also be * a multiple of 32 bytes). *//* * AS.HARNOIS : Better to set PKTSIZE to maximum size because * traffic type is not always controlled * maximum packet size =  1518 * maximum packet size and multiple of 32 bytes =  1536 */#define PKTSIZE			1518#define PKTSIZE_ALIGN		1536/*#define PKTSIZE		608*//* * Maximum receive ring size; that is, the number of packets * we can buffer before overflow happens. Basically, this just * needs to be enough to prevent a packet being discarded while * we are processing the previous one. */#define RINGSZ		4#define RINGSZ_LOG2	2/**********************************************************************//* *	Globals. *//* net.c *//** BOOTP EXTENTIONS **/extern IPaddr_t		NetOurGatewayIP;	/* Our gateway IP addresse	*/extern IPaddr_t		NetOurSubnetMask;	/* Our subnet mask (0 = unknown)*/extern IPaddr_t		NetOurDNSIP;	 /* Our Domain Name Server (0 = unknown)*/extern char		NetOurNISDomain[32];	/* Our NIS domain		*/extern char		NetOurHostName[32];	/* Our hostname			*/extern char		NetOurRootPath[64];	/* Our root path		*/extern ushort		NetBootFileSize;	/* Our boot file size in blocks	*//** END OF BOOTP EXTENTIONS **/extern ulong		NetBootFileXferSize;	/* size of bootfile in bytes	*/extern uchar		NetOurEther[6];		/* Our ethernet address		*/extern uchar		NetServerEther[6];	/* Boot server enet address	*/extern IPaddr_t		NetOurIP;		/* Our    IP addr (0 = unknown)	*/extern IPaddr_t		NetServerIP;		/* Server IP addr (0 = unknown)	*/extern volatile uchar * NetTxPacket;		/* THE transmit packet		*/extern volatile uchar * NetRxPackets[PKTBUFSRX];/* Receive packets		*/extern volatile uchar * NetRxPkt;		/* Current receive packet	*/extern int		NetRxPktLen;		/* Current rx packet length	*/extern unsigned		NetIPID;		/* IP ID (counting)		*/extern uchar		NetBcastAddr[6];	/* Ethernet boardcast address	*/extern bd_t	       *Net_bd;			/* global copy of bd ptr       */extern int		NetState;		/* Network loop state		*/#define NETLOOP_CONTINUE	1#define NETLOOP_RESTART		2#define NETLOOP_SUCCESS		3#define NETLOOP_FAIL		4typedef enum { BOOTP, RARP, ARP, TFTP, DHCP } proto_t;/* from net/net.c */extern char	BootFile[128];			/* Boot File name		*//* Initialize the network adapter */extern int	NetLoop(bd_t *bis, proto_t protocol);/* Shutdown adapters and cleanup */extern void	NetStop(void);/* Load failed.	 Start again. */extern void	NetStartAgain(void);/* Copy ethernet address */extern void	NetCopyEther(volatile uchar *, uchar *);/* Write IP address to network data structure (outgoing traffic) */extern void	NetWriteIP(volatile uchar * to, IPaddr_t ip);/* Read IP address from network data structure (incoming traffic) */extern IPaddr_t	NetReadIP(volatile uchar * to);/* Copy IP address from one location to another */extern void	NetCopyIP(volatile uchar * to, volatile uchar *from);/* Set ethernet header */extern void	NetSetEther(volatile uchar *, uchar *, uint);/* Set IP header */extern void	NetSetIP(volatile uchar *, IPaddr_t, int, int, int);/* Checksum */extern int	NetCksumOk(uchar *, int);	/* Return true if cksum OK	*/extern uint	NetCksum(uchar *, int);		/* Calculate the checksum	*//* Set callbacks */extern void	NetSetHandler(rxhand_f *);	/* Set RX packet handler	*/extern void	NetSetTimeout(int, thand_f *);	/* Set timeout handler		*//* Transmit "NetTxPacket" */extern void	NetSendPacket(volatile uchar *, int);/* Processes a received packet */extern void	NetReceive(volatile uchar *, int);/* Print an IP address on the console */extern void	print_IPaddr (IPaddr_t);/* Convert a IP address to a string */extern void	ip_to_string (IPaddr_t x, char *s);/* copy a filename (allow for "..." notation, limit length) */extern void	copy_filename (uchar *dst, uchar *src, int size);/**********************************************************************/#endif /* __NET_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -