fet120_adc10_05.c

一个基于TI的MSP430的程序设计参考代码

//******************************************************************************
//  MSP-FET430P120 Demo - ADC10 Sample A11 lo_Batt Set P1.0 if < 2.3V 
//
//  Description; A single sample is made on A11 (AVcc/2) with reference to 
//  internal 1.5V Vref. Software sets ADC10SC to start sample and conversion 
//  - ADC10SC automatically cleared at EOC. ADC10 internal oscillator times 
//  sample (16x) and conversion. ADC10BUSY flag is polled for EOC. If A11 
//  (AVcc/2) < 0311h (0.65V) indicating AVcc is less 2.3V, P1.0 set indicating 
//  a lo_Batt condition, else reset. 
//  //*MSP430F1232 or MSP430F1132 Device Required*//
//
//                MSP430F1232
//             -----------------
//         /|\|              XIN|-  
//          | |                 |
//          --|RST          XOUT|-
//            |                 |
//            |A11          P1.0|-->LED
//
//  M.Buccini
//  Texas Instruments, Inc
//  October 2003
//  Built with IAR Embedded Workbench Version: 1.26B
//  December 2003
//  Updated for IAR Embedded Workbench Version: 2.21B
//******************************************************************************

#include  <msp430x12x2.h>

void main(void)
{ 
  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT
  ADC10CTL1 = INCH_11;                  // AVcc/2
  ADC10CTL0 = SREF_1 + ADC10SHT_2 + REFON + ADC10ON;
  P1DIR |= 0x01;                        // Set P1.0 to output direction
  
  for (;;)                              
  {
    ADC10CTL0 |= ENC + ADC10SC;         // Sampling and conversion start
    while (ADC10CTL1 & ADC10BUSY);      // ADC10BUSY?
    if (ADC10MEM < 0x311)               // ADC10MEM = A11 > 0.65?
    P1OUT |= 0x01;                      // Set P1.0 LED on
    else
    P1OUT &= ~0x01;                     // Clear P1.0 LED off
  }
}