fet120_ta04.c

一个基于TI的MSP430的程序设计参考代码

//******************************************************************************
//  MSP-FET430P120 Demo - Timer_A Toggle P1.0, overflow ISR, 32kHz ACLK 
//
//  Description; Toggle P1.0 using using software and the timer_A overflow ISR. 
//  In this example an ISR will trigger when TA overflows.  Inside the ISR P1.0 
//  is toggled.  Toggle rate is exactly 0.25hz.
//  Proper use of TAIV interrupt vector generator demonstrated.
//  ACLK = TACLK = 32768, MCLK = SMCLK = DCO~ 800k
//  //*An external watch crystal on XIN XOUT is required for ACLK*//	  
//
//              MSP430F123(2)
//            -----------------
//        /|\|              XIN|-  
//         | |                 | 32kHz
//         --|RST          XOUT|-
//           |                 |
//           |             P1.0|-->LED
//
//  M. Buccini
//  Texas Instruments, Inc
//  October 2003
//  Built with IAR Embedded Workbench Version: 1.26B
//  December 2003
//  Updated for IAR Embedded Workbench Version: 2.21B
//******************************************************************************

#include  <msp430x12x.h>

void main(void)
{ 
  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT
  P1DIR |= 0x01;                        // P1.0 output
  TACTL = TASSEL_1 + MC_2 + TAIE;       // ACLK, contmode, interrupt

  _BIS_SR(LPM3_bits + GIE);             // Enter LPM3 w/ interrupt
}

// Timer_A3 Interrupt Vector (TAIV) handler
#pragma vector=TIMERA1_VECTOR
__interrupt void Timer_A(void)
{
  switch( TAIV )
  {
    case  2:  break;                    // CCR1 not used
    case  4:  break;                    // CCR2 not used
    case 10:  P1OUT ^= 0x01;            // overflow
              break;
  }
}