📄 global_variables.h
字号:
/******************************************************************************
**
** COPYRIGHT (C) 2000, 2001, 2002 Intel Corporation.
**
** The information in this file is furnished for informational use
** only, is subject to change without notice, and should not be construed as
** a commitment by Intel Corporation. Intel Corporation assumes no
** responsibility or liability for any errors or inaccuracies that may appear
** in this document or any software that may be provided in association with
** this document.
**
** FILENAME: Global_Variables.h
**
** PURPOSE: declares all global varibales used by the Jflash software
**
** LAST MODIFIED: $Modtime: 2/27/03 11:26a $
******************************************************************************/
/*
*******************************************************************************
Globals
*******************************************************************************
*/
int lpt_address; // Global variable assigned to parallel port address
int lpt_ECR; // global for LPT extended control register
int lpt_CTL; // global for the LPT control port
int lpt_STAT; // global for LPT status register
DWORD MILLISECOND_COUNT = 0; // global to keep an approx loop count for a ms
int block_number = 0; // Global variable for determining the block number
char filename[MAX_IN_LENGTH] = "download.bin"; // Global variable for storing the file name
char data_filename[MAX_IN_LENGTH] = "DBPXA250"; // Global variable for the platform data file
char flash_data_filename[MAX_IN_LENGTH] = "Flash_18_2_32.dat"; // Global variable for the flash data file
//<wcy
char debug_data_filename[MAX_IN_LENGTH] = "Hx_Pxa255_Debug.dat"; // Global variable for the flash data file
//wcy>
char VERSION_LOCK[11] = "VL00000001";
char FLASH_VERSION_LOCK[11] = "VLF0000001";
CABLE_TYPES CableType = Insight_Jtag; // Global variable for specifying the Cable type
DWORD ChipSelect0 = 0; // Global variable for chip select 0
DWORD ChipSelect1 = 0; // Global variable for chip select 1
DWORD ChipSelect2 = 0; // Global variable for chip select 2
DWORD ChipSelect3 = 0; // Global variable for chip select 3
DWORD ChipSelect4 = 0; // Global variable for chip select 4
DWORD ChipSelect5 = 0; // Global variable for chip select 5
DWORD OutputEnable = 0; // Global variable for output enable
DWORD WriteEnable = 0; // Global variable for write enable
DWORD MdUpperControl = 0; // Global variable for MD upper control
DWORD MdLowerControl = 0; // Global variable for MD lower control
DWORD ReadWriteMode = 0; // Global variable for Read Write access mode
DWORD IR_Idcode = 0; // Global variable for the IDCODE instruction of the IR
DWORD IR_Bypass = 0; // Global variable for the BYPASS instruction of the IR
DWORD IR_Extest = 0; // Global variable for the EXTEST instruction of the IR
DWORD ChainLength = 0; // Global variable for the chain length of the selected platform
DWORD UnlockFlashCtrl1 = 0; // unlock flash control pin 1
DWORD UnlockFlashCtrl1Lev = 0; // unlock flash control pin 1 level for unlock
DWORD LockFlashCtrl1Lev = 0; // lock1 flash level
DWORD UnlockFlashCtrl2 = 0; // unlock flash control pin 2
DWORD UnlockFlashCtrl2Lev = 0; // unlock flash control pin 2 level for unlock
DWORD LockFlashCtrl2Lev = 0; // lock2 flash level
DWORD UnlockFlashCtrl3 = 0; // unlock flash control pin 3
DWORD UnlockFlashCtrl3Lev = 0; // unlock flash control pin 3 level for unlock
DWORD LockFlashCtrl3Lev = 0; // lock3 flash level
DWORD UnlockFlashCtrl4 = 0; // unlock flash control pin 4
DWORD UnlockFlashCtrl4Lev = 0; // unlock flash control pin 4 level for unlock
DWORD LockFlashCtrl4Lev = 0; // lock4 flash level
DWORD CSR_LADDR[6]; // array of chip select region low addresses
DWORD CSR_HADDR[6]; // array of chip select regions high addresses
DWORD CSR1 = 6; // the chip select for region 1. 6 is illegal and is here to flag an error if not defined.
DWORD CSR2 = 6; // the chip select for region 2
DWORD CSR3 = 6; // the chip select for region 3
DWORD CSR4 = 6; // the chip select for region 4
DWORD CSR5 = 6; // the chip select for region 5
DWORD CSR6 = 6; // the chip select for region 6
// some flash related globals
DWORD BlockEraseTime = 10;
DWORD FlashBufferSize = 32;
DWORD FlashDeviceSize = 0;
bool REGION_STATUS[10]; // array of region status
DWORD REGION_NUM_BLOCKS[10]; // number of blocks in the region
DWORD REGION_BLOCKSIZE[10]; // The size of the blocks in that region
DWORD REGION_START_ADDR[10]; // The start address of the region
DWORD REGION_END_ADDR[10]; // the end address of the region
DWORD BLOCK_ADDRESS[512]; // up to 512 unique block addresses
int ADDR_MULT = 4; // addressing multiplier or divider for flash
int WorkBufSize = 0; // Global variable for setting the work buffer size
int IrLength = 0; // Global variable for setting the correct IR length
// Chain device data
bool DEVICESTATUS[5]; // enabled or disabled
DWORD DEVICEIRLENGTH[5]; // length of IR to set bypass
bool DEVICETYPE[5]; // true if controller
bool DEVICEISLAST[5];
int DEVICE_CONTROLLER = 0; // which device is the controller
int DEVICES_BEFORE = 0;
int DEVICES_AFTER = 0;
int DEVICES_IN_CHAIN = 0;
#define MAX_HANDLER_SIZE 0x200
bool PlatformIs16bit = false; // Global variable for diferentiating between 16bit and 32bit platforms
bool PlatformIsBulverdeOrDimebox = true; // Global variable to determine if the selected platform is bulverde or dimebox
bool PlatformIsBulverdeDimeboxShortChain = false; // Global variable for determining whether it's a short chain or not
bool PlatformIsBulverdeDimeboxLongChain = true; // Global variable for determining whether it's a long chain or not
bool Debug_Mode = false;
bool UsageShown = false;
bool AskQuestions = true;
//<wcy
bool VerifyRetry = false;
bool ErrorReturn = false;
//wcy>
unsigned long gpdr[4] = {0x40e0000c,0x40e00010,0x40e00014,0x40e0010c};
unsigned long gpsr[4] = {0x40e00018,0x40e0001c,0x40e00020,0x40e00118};
unsigned long gpcr[4] = {0x40e00024,0x40e00028,0x40e0002c,0x40e00124};
// Globals for flash commands and query codes. Assumes 32 bit as default
DWORD F_READ_ARRAY = 0x00FF00FFL;
DWORD F_READ_IDCODES = 0x00900090L;
DWORD F_READ_QUERY = 0x00980098L;
DWORD F_READ_STATUS = 0x00700070L;
DWORD F_CLEAR_STATUS = 0x00500050L;
DWORD F_WRITE_BUFFER = 0x00E800E8L;
DWORD F_WORDBYTE_PROG = 0x00400040L;
DWORD F_BLOCK_ERASE = 0x00200020L;
DWORD F_BLOCK_ERASE_2ND = 0x00D000D0L;
DWORD F_BLK_ERASE_PS = 0x00B000B0L;
DWORD F_BLK_ERASE_PR = 0x00D000D0L;
DWORD F_CONFIGURATION = 0x00B800B8L;
DWORD F_SET_READ_CFG_REG = 0x00600060L;
DWORD F_SET_READ_CFG_REG_2ND = 0x00030003L;
DWORD F_SET_BLOCK_LOCK = 0x00600060L;
DWORD F_SET_BLOCK_LOCK_2ND = 0x00010001L;
DWORD F_CLEAR_BLOCK_LOCK = 0x00600060L;
DWORD F_CLEAR_BLOCK_LOCK_2ND =0x00D000D0L;
DWORD F_PROTECTION = 0x00C000C0L;
DWORD F_ATTR_Q = 0x00510051L;
DWORD F_ATTR_R = 0x00520052L;
DWORD F_ATTR_Y = 0x00590059L;
DWORD F_BLOCK_LOCKED = 0x00010001L;
DWORD F_STATUS_READY = 0x00800080L;
FILE *in_file;
//<wcy
FILE *debug_file_pointer;
//wcy>
FILE *data_file_pointer;
FILE *flash_file_pointer;
int out_dat[MAX_DR_SIZE];
bool UNLOCKBLOCK = false;
bool HASLOCKCONTROLS = false; // Is there external locking for the flash?
unsigned long MAX_DATA = 230;
unsigned long MAX_FLASH_DATA = 60;
//<wcy
unsigned long MAX_DEBUG_DATA = 60;
//wcy>
//<wcy
char DBGINFOARRAY[60][132]; // the capture of all strings from the data file
//wcy>
char WORDARRAY[230][132]; // the capture of all strings from the data file
char FLASHWORDARRAY[60][132]; // the capture of all strings from the data file
DWORD addr_order[27];
DWORD input_dat_order[33];
DWORD dat_order[33];
DWORD pin[1000]; // max JTAG boundary length of 1000 bits
// The following hardcoded values need to be moved to the data files.
// hardcode here for now
// bulverde only:
DWORD IR_DCSR = 0x9;
DWORD IR_DBGrx = 0x2;
DWORD IR_DBGtx = 0x10;
DWORD IR_LDIC = 0x7;
// Position of data in the platform data file
#define p_processor 0
#define p_devsys 1
#define p_dataver 2
#define p_verlock 3
#define p_blength 4
#define p_irlength 5
#define p_extest 6
#define p_idcode 7
#define p_bypass 8
#define p_cs0 9
#define p_cs1 10
#define p_cs2 11
#define p_cs3 12
#define p_cs4 13
#define p_cs5 14
#define p_nOE_OUT 15
#define p_nWE_OUT 16
#define p_mdupper_ctrl 17
#define p_mdlower_ctrl 18
#define p_RD_nWR_OUT 19
#define p_cp1 20
#define p_a0 21
#define p_a1 22
#define p_a2 23
#define p_a3 24
#define p_a4 25
#define p_a5 26
#define p_a6 27
#define p_a7 28
#define p_a8 29
#define p_a9 30
#define p_a10 31
#define p_a11 32
#define p_a12 33
#define p_a13 34
#define p_a14 35
#define p_a15 36
#define p_a16 37
#define p_a17 38
#define p_a18 39
#define p_a19 40
#define p_a20 41
#define p_a21 42
#define p_a22 43
#define p_a23 44
#define p_a24 45
#define p_a25 46
#define p_d0in 47
#define p_d1in 48
#define p_d2in 49
#define p_d3in 50
#define p_d4in 51
#define p_d5in 52
#define p_d6in 53
#define p_d7in 54
#define p_d8in 55
#define p_d9in 56
#define p_d10in 57
#define p_d11in 58
#define p_d12in 59
#define p_d13in 60
#define p_d14in 61
#define p_d15in 62
#define p_d16in 63
#define p_d17in 64
#define p_d18in 65
#define p_d19in 66
#define p_d20in 67
#define p_d21in 68
#define p_d22in 69
#define p_d23in 70
#define p_d24in 71
#define p_d25in 72
#define p_d26in 73
#define p_d27in 74
#define p_d28in 75
#define p_d29in 76
#define p_d30in 77
#define p_d31in 78
#define p_d0out 79
#define p_d1out 80
#define p_d2out 81
#define p_d3out 82
#define p_d4out 83
#define p_d5out 84
#define p_d6out 85
#define p_d7out 86
#define p_d8out 87
#define p_d9out 88
#define p_d10out 89
#define p_d11out 90
#define p_d12out 91
#define p_d13out 92
#define p_d14out 93
#define p_d15out 94
#define p_d16out 95
#define p_d17out 96
#define p_d18out 97
#define p_d19out 98
#define p_d20out 99
#define p_d21out 100
#define p_d22out 101
#define p_d23out 102
#define p_d24out 103
#define p_d25out 104
#define p_d26out 105
#define p_d27out 106
#define p_d28out 107
#define p_d29out 108
#define p_d30out 109
#define p_d31out 110
#define p_cp2 111
#define p_datawidth 112
#define p_m_reg1_low 113
#define p_m_reg1_high 114
#define p_m_reg1_cs 115
#define p_m_reg2_low 116
#define p_m_reg2_high 117
#define p_m_reg2_cs 118
#define p_m_reg3_low 119
#define p_m_reg3_high 120
#define p_m_reg3_cs 121
#define p_m_reg4_low 122
#define p_m_reg4_high 123
#define p_m_reg4_cs 124
#define p_m_reg5_low 125
#define p_m_reg5_high 126
#define p_m_reg5_cs 127
#define p_m_reg6_low 128
#define p_m_reg6_high 129
#define p_m_reg6_cs 130
#define p_proc_id 131
#define p_proc_mfg 132
#define p_proc_std 133
#define p_CID0 134
#define p_CID1 135
#define p_CID2 136
#define p_CID3 137
#define p_CID4 138
#define p_CID5 139
#define p_CID6 140
#define p_CID7 141
#define p_CID8 142
#define p_CID9 143
#define p_CID10 144
#define p_CID11 145
#define p_CID12 146
#define p_CID13 147
#define p_CID14 148
#define p_CID15 149
#define p_nh1 150
#define p_nh2 151
#define p_nh3 152
#define p_nh4 153
#define p_nh5 154
#define p_nh6 155
#define p_nh7 156
#define p_nh8 157
#define p_nh9 158
#define p_nh10 159
#define p_nh11 160
#define p_nh12 161
#define p_nh13 162
#define p_nh14 163
#define p_nh15 164
#define p_nh16 165
#define p_nh17 166
#define p_nh18 167
#define p_nh19 168
#define p_nh20 169
#define p_nh21 170
#define p_nh22 171
#define p_nh23 172
#define p_nh24 173
#define p_nh25 174
#define p_nh26 175
#define p_nh27 176
#define p_nh28 177
#define p_nh29 178
#define p_nh30 179
#define p_nh31 180
#define p_nh32 181
#define p_nh33 182
#define p_nh34 183
#define p_nh35 184
#define p_nh36 185
#define p_nh37 186
#define p_nh38 187
#define p_nh39 188
#define p_nh40 189
#define p_nh41 190
#define p_nh42 191
#define p_nh43 192
#define p_nh44 193
#define p_nh45 194
#define p_nh46 195
#define p_nh47 196
#define p_dev1_stat 197
#define p_dev1_bits 198
#define p_dev1_type 199
#define p_dev1_islast 200
#define p_dev2_stat 201
#define p_dev2_bits 202
#define p_dev2_type 203
#define p_dev2_islast 204
#define p_dev3_stat 205
#define p_dev3_bits 206
#define p_dev3_type 207
#define p_dev3_islast 208
#define p_dev4_stat 209
#define p_dev4_bits 210
#define p_dev4_type 211
#define p_dev4_islast 212
#define p_dev5_stat 213
#define p_dev5_bits 214
#define p_dev5_type 215
#define p_dev5_islast 216
#define p_unlctl1 217
#define p_unlctl1_lev 218
#define p_unlctl2 219
#define p_unlctl2_lev 220
#define p_unlctl3 221
#define p_unlctl3_lev 222
#define p_unlctl4 223
#define p_unlctl4_lev 224
#define p_cp3 225
#define p_fdevsacross 226
#define p_nsdcas 227
#define P_progmode 228
// position of data in the flash data file
#define pf_type 0
#define pf_dataver 1
#define pf_verlock 2
#define pf_ertime 3
#define pf_bufsize 4
#define pf_reg0status 5
#define pf_reg0number 6
#define pf_reg0blsize 7
#define pf_reg0start 8
#define pf_reg0end 9
#define pf_reg1status 10
#define pf_reg1number 11
#define pf_reg1blsize 12
#define pf_reg1start 13
#define pf_reg1end 14
#define pf_reg2status 15
#define pf_reg2number 16
#define pf_reg2blsize 17
#define pf_reg2start 18
#define pf_reg2end 19
#define pf_reg3status 20
#define pf_reg3number 21
#define pf_reg3blsize 22
#define pf_reg3start 23
#define pf_reg3end 24
#define pf_reg4status 25
#define pf_reg4number 26
#define pf_reg4blsize 27
#define pf_reg4start 28
#define pf_reg4end 29
#define pf_reg5status 30
#define pf_reg5number 31
#define pf_reg5blsize 32
#define pf_reg5start 33
#define pf_reg5end 34
#define pf_reg6status 35
#define pf_reg6number 36
#define pf_reg6blsize 37
#define pf_reg6start 38
#define pf_reg6end 39
#define pf_reg7status 40
#define pf_reg7number 41
#define pf_reg7blsize 42
#define pf_reg7start 43
#define pf_reg7end 44
#define pf_reg8status 45
#define pf_reg8number 46
#define pf_reg8blsize 47
#define pf_reg8start 48
#define pf_reg8end 49
#define pf_reg9status 50
#define pf_reg9number 51
#define pf_reg9blsize 52
#define pf_reg9start 53
#define pf_reg9end 54
#define pf_cp1 55
//<wcy
#define pd_max_gpio_number 0
#define pd_gpio0_ctrl 1
#define pd_gpio0_output 2
#define pd_gpio0_input 3
#define pd_npwe_out 4
//wcy>⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -