cnt5.fit

步进的控制电机控制 c++环境下开发

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 01/28/2005 11:05:22      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt5"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "CLK"                          : INPUT_PIN  = 39     ;
    "CQ0"                          : OUTPUT_PIN = 14     ;
    "CQ1"                          : OUTPUT_PIN = 63     ;
    "CQ2"                          : OUTPUT_PIN = 65     ;
    "CQ3"                          : OUTPUT_PIN = 15     ;
    "CQ4"                          : OUTPUT_PIN = 64     ;
    "|LPM_ADD_SUB:27|addcore:adder|:59" : LOCATION   = LC6_B4 ;
    ":7"                           : LOCATION   = LC2_B4 ;  -- CQI4
    ":8"                           : LOCATION   = LC5_B4 ;  -- CQI3
    ":9"                           : LOCATION   = LC1_B4 ;  -- CQI2
    ":10"                          : LOCATION   = LC4_B4 ;  -- CQI1
    ":11"                          : LOCATION   = LC3_B4 ;  -- CQI0

END;

INTERNAL_INFO "cnt5"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC2_B4,->LC5_B4,->LC1_B4,->LC4_B4,->LC3_B4|";
    LC2_B4  : LORAX = "1:MSW1R1C3,G35R1->OH9R1P64|";
    LC5_B4  : LORAX = "1:MSW4R1C3,G60R1->OH4R1P15|";
    LC1_B4  : LORAX = "1:MSW0R1C3,HHL19R1->OH8R1P65|";
    LC4_B4  : LORAX = "1:MSW3R1C3,HHL17R1->OH11R1P63|";
    LC3_B4  : LORAX = "1:MSW2R1C3,G24R1->OH2R1P14|";
	LC6_B4  : LORAX2 = "X, X, LC4_B4, LC3_B4";
	LC2_B4  : LORAX2 = "LC6_B4, LC2_B4, LC5_B4, LC1_B4";
	LC5_B4  : LORAX2 = "X, LC6_B4, LC5_B4, LC1_B4";
	LC1_B4  : LORAX2 = "X, X, LC6_B4, LC1_B4";
	LC4_B4  : LORAX2 = "X, X, LC4_B4, LC3_B4";
	LC3_B4  : LORAX2 = "X, X, X, LC3_B4";
END;