report.h

用keil开发的.单片机税控器程序.单片机用的是AT公司的.upsd3245

/*
* Copyright (c) 2004,成都港顺科技发展有限公司
* All rights reserved.
*
* 编 译 器：Keil:C Compiler:7.20;Assembler:7.10
* 工程名称：POS-Test.UV2
* 文件名称：ReportPrint.H
* 摘    要：表报打印函数申明
* 
* 单 片 机：uPSD3254 
* 当前版本：0.4
* 作    者：雍继兵
* 完成日期：2004-12-5 14:45
*/

#define mode1 1
#define mode2 1
#define test 0
#define test1 0
#define Col 50	//提示的起始列
#define Co 40		//画矩行的起始列
#define Hj 128	//提示起始列


extern code unsigned char pic1[];
extern code unsigned char pic2[];
uchar AppointTimeSectRes(uchar type,uchar dis,uchar *Itime);
void Dandemand();
uchar DayCollDataDisplay(uchar disHead,uchar *InputDayData);
void FenInvoInput2(uchar flag);
void FenInvoInputInvo();
uchar AppointInvdis(uchar dts,uchar *indat);
void Invcodedemand();
void InvoBegindemand();
void InvoDatdemand();
void InvoEnddemand();
void InvoPrintDatdemand();
uchar InvPrintData(uchar disfg,uchar Sectfg,uchar *str);
void MachineData();
void ManageSlaedemand(uchar XZselect);
void OldInfodemand();
void OpenDaydemand();
void Report1(uchar *str);
void Report2(uchar *str);
uchar ReportData(uchar flag,uchar *str);
void Report();
void TaxInfo(uchar tax);
void TaxInfomation();
void ReHint(uchar *Dialog1,uchar *Dialog2);
void USE1(uchar *str);
void USE2(uchar *str);
void UseInfodemand();
void UseInformation(uchar flag);
void WatchManageData(uchar flag);

void BcdCfHex(uchar BCDLen,uchar *BCD,uchar *Hex);
uchar Businessdemand(uchar BianHao,uchar *ReadJE,uchar xzReport);
uchar DayCollData(uchar *InputData,uchar *ReadDayCollData);
uchar Dialog(uchar *Clew1,uchar *Clew2,uchar *Clew4,uchar Len,uchar *BCD_Val);
void FenFademand(uchar flag);

ulong HexlongDialog(uchar *Clew1,uchar *Clew2,uchar *Clew4,uchar *Len,ulong Init);
uchar InvNumberdemand(uchar SN,ulong InputNumber,uchar *ReadNumber);
void MachineData_LP(uchar flag,uchar *str);
void ReMenu1();
void ReMenu10();
void ReMenu11();
void ReMenu12();
void ReMenu13();
void ReMenu14();
void Menu15();
void ReMenu2();
void Menu4();
void ReMenu5();
void ReMenu6();
void ReMenu7();
void ReMenu8();
void Menu9();
void OnLcdYingYiYuangJie(uchar flag,uchar *DatJine,uchar xzReport,uchar *bh);
uchar OpenInvDatdemand(uchar flag,uchar *InputData,uchar *ReadOpenData);
uchar Res_InvCode(uchar *InInvCode,uchar *ReadInvCode);

void TaxTax(uchar flag,uchar *str);
uchar TimeInputDialog(uchar *TimeVal);

void PrintInvoNo();
void ReportDataSB();
uchar BeginDay(uchar v,uchar *str);
uchar DeclareDatQuery(uchar *tm,uchar x);
//*tm:日期(4字节,BCD),x=0:根据起始日期查询;x=1:根据截止日期查询//返回为0则没有找到对应数据,返回为1则找到
void SaleRes();
uchar TimeSectData(uchar type,uchar *Itime,ulong *adn,uchar *Redat);
void DisHint(uchar *s1,uchar *s2,uchar *s3);
void AllManageSale(uchar dis);
uchar ReSelectMode(void);
uchar PrintHint(void);
void Itarr(uchar *str);
void InvDisAndPrint(uchar flag,uchar *dat,uchar xz,uchar *Number);
void InputTimeSegment(uchar flag);
void RePlan(uchar flag);
void InfoSafety(uchar MatterType,uchar MatterResult,uchar UseStand,uchar *Note);
void ExportDat();
uchar SerialPortExport(uchar Seu);
uchar Wait(uchar *val);
uchar	UartRxd_Down(uchar flag,uint Len,uchar *str);
void UartTxd_Down(uchar	flag,uint	Len,uchar	*str);
uchar UsbFilesModi(uchar *FileName,uint Len,uchar *dat);
uchar CheckUDisk();
uchar InvoiceGather(uchar *time,uchar DP);
void PrintTime(uchar *InputStr,uchar *time,uchar *OutPut);
void PrintLine(uchar *Instr);