makefile.in

PIXIL is a small footprint operating environment, complete with PDA PIM applications, a browser and

	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

libvideogfx.la: $(libvideogfx_la_OBJECTS) $(libvideogfx_la_DEPENDENCIES)
	$(CXXLINK) -rpath $(libdir) $(libvideogfx_la_LDFLAGS) $(libvideogfx_la_OBJECTS) $(libvideogfx_la_LIBADD) $(LIBS)
.cc.o:
	$(CXXCOMPILE) -c $<
.cc.lo:
	$(LTCXXCOMPILE) -c $<

install-libvideogfx_includeHEADERS: $(libvideogfx_include_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(libvideogfx_includedir)
	@list='$(libvideogfx_include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libvideogfx_includedir)/$$p"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libvideogfx_includedir)/$$p; \
	done

uninstall-libvideogfx_includeHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(libvideogfx_include_HEADERS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(libvideogfx_includedir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = libvideogfx

distdir: $(DISTFILES)
	here=`cd $(top_builddir) && pwd`; \
	top_distdir=`cd $(top_distdir) && pwd`; \
	distdir=`cd $(distdir) && pwd`; \
	cd $(top_srcdir) \
	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu libvideogfx/Makefile
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done

DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)

-include $(DEP_FILES)

mostlyclean-depend:

clean-depend:

distclean-depend:
	-rm -rf .deps

maintainer-clean-depend:

%.o: %.c
	@echo '$(COMPILE) -c $<'; \
	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-cp .deps/$(*F).pp .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm .deps/$(*F).pp

%.lo: %.c
	@echo '$(LTCOMPILE) -c $<'; \
	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
	  < .deps/$(*F).pp > .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm -f .deps/$(*F).pp

%.o: %.cc
	@echo '$(CXXCOMPILE) -c $<'; \
	$(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-cp .deps/$(*F).pp .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm .deps/$(*F).pp

%.lo: %.cc
	@echo '$(LTCXXCOMPILE) -c $<'; \
	$(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
	  < .deps/$(*F).pp > .deps/$(*F).P; \
	tr ' ' '\012' < .deps/$(*F).pp \
	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
	    >> .deps/$(*F).P; \
	rm -f .deps/$(*F).pp
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-libLTLIBRARIES
install-exec: install-exec-recursive

install-data-am: install-libvideogfx_includeHEADERS
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-libLTLIBRARIES \
		uninstall-libvideogfx_includeHEADERS
uninstall: uninstall-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(libdir) \
		$(DESTDIR)$(libvideogfx_includedir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
		clean-depend clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-libLTLIBRARIES distclean-compile \
		distclean-libtool distclean-tags distclean-depend \
		distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-depend \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool uninstall-libvideogfx_includeHEADERS \
install-libvideogfx_includeHEADERS install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir \
mostlyclean-depend distclean-depend clean-depend \
maintainer-clean-depend info-am info dvi-am dvi check check-am \
installcheck-am installcheck install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


.PHONY: files

files:
	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
	  echo $$p; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: