configure

PIXIL is a small footprint operating environment, complete with PDA PIM applications, a browser and

ac_objext=$OBJEXT
echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"

#ifdef F77_DUMMY_MAIN
#  ifdef __cplusplus
     extern "C"
#  endif
   int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_compiler_gnu=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu

fi
echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
CFLAGS="-g"
echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cc_g+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"

#ifdef F77_DUMMY_MAIN
#  ifdef __cplusplus
     extern "C"
#  endif
   int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_prog_cc_g=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
# Some people use a C++ compiler to compile C.  Since we use `exit',
# in C++ we need to declare it.  In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
# the declaration of exit, since it's the most demanding environment.
cat >conftest.$ac_ext <<_ACEOF
#ifndef __cplusplus
  choke me
#endif
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  for ac_declaration in \
   ''\
   '#include <stdlib.h>' \
   'extern "C" void std::exit (int) throw (); using std::exit;' \
   'extern "C" void std::exit (int); using std::exit;' \
   'extern "C" void exit (int) throw ();' \
   'extern "C" void exit (int);' \
   'void exit (int);'
do
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
#include <stdlib.h>
$ac_declaration
#ifdef F77_DUMMY_MAIN
#  ifdef __cplusplus
     extern "C"
#  endif
   int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
exit (42);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  :
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
$ac_declaration
#ifdef F77_DUMMY_MAIN
#  ifdef __cplusplus
     extern "C"
#  endif
   int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
exit (42);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  break
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
  echo '#ifdef __cplusplus' >>confdefs.h
  echo $ac_declaration      >>confdefs.h
  echo '#endif'             >>confdefs.h
fi

else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f $ac_dir/shtool; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
   { (exit 1); exit 1; }; }
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.

# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
echo "$as_me: error: cannot run $ac_config_sub" >&2;}
   { (exit 1); exit 1; }; }

echo "$as_me:$LINENO: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
  ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
   { (exit 1); exit 1; }; }
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


echo "$as_me:$LINENO: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
  ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_target_alias=$target_alias
test "x$ac_cv_target_alias" = "x" &&
  ac_cv_target_alias=$ac_cv_host_alias
ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:$LINENO: result: $ac_cv_target" >&5
echo "${ECHO_T}$ac_cv_target" >&6
target=$ac_cv_target
target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`


# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-

case $target_cpu in
  i?86) echo "$as_me:$LINENO: result: + Enabling MMX code" >&5
echo "${ECHO_T}+ Enabling MMX code" >&6
        cat >>confdefs.h <<\_ACEOF
#define ENABLE_MMX 1
_ACEOF

        echo "$as_me:$LINENO: result: + Enabling unaligned memory access" >&5
echo "${ECHO_T}+ Enabling unaligned memory access" >&6
	cat >>confdefs.h <<\_ACEOF
#define UNALIGNED_MEMORYACCESS 1
_ACEOF

        OBJLIST="$OBJLIST \$(MMXOBJS)" ;;
  *)  echo "$as_me:$LINENO: result: - MMX code disabled" >&5
echo "${ECHO_T}- MMX code disabled" >&6
      echo "$as_me:$LINENO: result: - Unaligned memory access code disabled" >&5
echo "${ECHO_T}- Unaligned memory access code disabled" >&6 ;;
esac

case $target_os in
  *linux*) cat >>confdefs.h <<\_ACEOF
#define LINUX 1
_ACEOF

           OBJLIST="$OBJLIST \$(LINUXOBJS)"
           echo "$as_me:$LINENO: result: + Enabling Linux specific code" >&5
echo "${ECHO_T}+ Enabling Linux specific code" >&6 ;;
  *) echo "$as_me:$LINENO: result: - Disabling Linux specific code" >&5
echo "${ECHO_T}- Disabling Linux specific code" >&6 ;;
esac



# Check whether --with-nanox or --without-nanox was given.
if test "${with_nanox+set}" = set; then
  withval="$with_nanox"

	CFLAGS="$CFLAGS -I$with_nanox/include"
	CXXFLAGS="$CXXFLAGS -I$with_nanox/include"
	LDFLAGS="$LDFLAGS -L$with_nanox/lib"
	LIBS="$LIBS -lnano-X -lstdc++ -lm"
	PLATFORMOBJS="output/out_nanox.o"

else


echo "$as_me:$LINENO: checking for XCreateWindow in -lX11" >&5
echo $ECHO_N "checking for XCreateWindow in -lX11... $ECHO_C" >&6
if test "${ac_cv_lib_X11_XCreateWindow+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lX11  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char XCreateWindow ();
#ifdef F77_DUMMY_MAIN
#  ifdef __cplusplus
     extern "C"
#  endif
   int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
XCreateWindow ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest