g6610.h

LCD彩显驱动 nokia 6100 LCD

#define GLCD_PIXELX			130
#define GLCD_PIXELY			130
#define GLCD_CACHE_SIZE		((GLCD_PIXELX * GLCD_PIXELY) / 8)
#define GLCD_X_START		0
#define GLCD_Y_START		0
#define GLCD_X_END			GLCD_PIXELY-1
#define GLCD_Y_END			GLCD_PIXELY-1

// Lcd Port Settings
#define GLCD_SER_PORT		PORTB
#define GLCD_SER_DDR		DDRB

// Colors
#define BLACK				0x00
#define WHITE				0xFF
#define RED					0x03
#define GREEN				0x1C
#define BLUE				0xE0
#define MAGENTA				0xE3
#define YELLOW				0x1F
#define CYAN				0xFC



#define GLCD_SWRESET		0x01
#define GLCD_BSTRON			0x03
#define GLCD_SLEEPOUT		0x11
#define GLCD_DISPLAYON		0x29
#define GLCD_COLMOD			0x3A
#define GLCD_8BITCOLOR		0xCE
#define GLCD_RGBSET			0x2D
#define GLCD_MADCTL			0x36
#define GLCD_MX				6
#define GLCD_MY				7
#define GLCD_VERTICAL		5

#define LAO					4
#define MEMWRITE			0x5C
#define ADDRX				0x75
#define ADDRY				0x15


#define SOFT_RESET		0x01
#define SLEEP_OUT		0x11
#define DISPLAY_ON		0x29
#define BOOSTER_ON		0x03
#define COLOR_INTERFACE	0x3A
  #define COLOR_8_BIT	0x02
#define COLOR_SET		0x2D
#define MEM_ACCESS_CTRL	0xFC
  #define MIRROR_X		6
  #define MIRROR_Y		7
  #define VERT_WRITE	5

#define MEM_WRITE		0x2C
#define SET_X_ADDR		0x2A
#define SET_Y_ADDR		0x2B


  #define MEM_90                0     // virtual flag not for PCF8833
  #define MEM_RGB               3     // color order
  #define MEM_LAO               4     // line access order
  #define MEM_VW                5     // vertical write
  #define MEM_MX                6     // mirror X
  #define MEM_MY                7     // mirror Y
/*
 * for n6100SetDrawRect();
 */
//unsigned int  cbk,cfg,cfr,csh;