chufa1.fit

微机接口实验程序 。。 。。 。。 。。 。。 。。 。。

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 04/02/2006 13:37:56      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "chufa1"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "WAY1"                         : INPUT_PIN  = 2      ;
    "WAY2"                         : INPUT_PIN  = 42     ;
    "WAY3"                         : INPUT_PIN  = 44     ;
    "CHUFA"                        : OUTPUT_PIN = 18     ;
    ":6"                           : LOCATION   = LC1_A3 ;  -- A0
    ":7"                           : LOCATION   = LC4_A6 ;  -- A1
    ":8"                           : LOCATION   = LC5_A6 ;  -- A2
    ":25"                          : LOCATION   = LC2_A6 ;
    ":46"                          : LOCATION   = LC1_A6 ;
    ":53"                          : LOCATION   = LC3_A6 ;
    ":222"                         : LOCATION   = LC7_A6 ;
    ":223"                         : LOCATION   = LC6_A6 ;
    ":227"                         : LOCATION   = LC8_A6 ;

END;

INTERNAL_INFO "chufa1"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A3,->LC4_A6,->LC5_A6|";
    OD1P2   : LORAX = "1:FB1|2:FH1R0,PA20R0C5->LC6_A6||";
    OD3P42  : LORAX = "1:FB3|2:FH3R0,PA5R0C5->LC7_A6||";
    OD2P44  : LORAX = "1:FB2|2:FH2R0,PA6R0C5->LC8_A6||";
    LC1_A3  : LORAX = "1:MSW0R0C2,HHL21R0,PA14R0C5->LC2_A6,->LC1_A6,->LC3_A6|";
    LC8_A6  : LORAX = "1:MSW4R0C4,HHL44R0->OH12R0P18|";
	LC1_A3  : LORAX2 = "X, X, X, LC1_A3";
	LC4_A6  : LORAX2 = "LC2_A6, LC1_A6, LC4_A6, LC3_A6";
	LC5_A6  : LORAX2 = "LC2_A6, LC5_A6, LC3_A6, LC1_A6";
	LC2_A6  : LORAX2 = "X, LC1_A3, LC5_A6, LC4_A6";
	LC1_A6  : LORAX2 = "X, LC1_A3, LC5_A6, LC4_A6";
	LC3_A6  : LORAX2 = "X, LC1_A3, LC5_A6, LC4_A6";
	LC7_A6  : LORAX2 = "X, X, OD3P42, LC3_A6";
	LC6_A6  : LORAX2 = "OD1P2, LC3_A6, LC1_A6, LC8_A6";
	LC8_A6  : LORAX2 = "OD2P44, LC2_A6, LC7_A6, LC6_A6";
END;