main.c

来自「《单片机c程序设计及应用实列》一书的源代」· C语言 代码 · 共 51 行

#include <REG52.H>                /* special function register declarations   */
                                  /* for the intended 8051 derivative         */

#include <stdio.h>                /* prototype declarations for I/O functions */

#ifdef MONITOR51                         /* Debugging with Monitor-51 needs   */
char code reserve [3] _at_ 0x23;         /* space for serial interrupt if     */
#endif                                   /* Stop Exection with Serial Intr.   */
                                         /* is enabled                        */
/*------------------------------------------------
The main C function.  Program execution starts
here after stack initialization.
------------------------------------------------*/
void main (void) {

	int sub_max(int *b,int i);
	int n,a[10],*ptr=a;
	int max;
/*------------------------------------------------
Setup the serial port for 1200 baud at 16MHz.
------------------------------------------------*/
#ifndef MONITOR51
    SCON  = 0x50;		        /* SCON: mode 1, 8-bit UART, enable rcvr      */
    TMOD |= 0x20;               /* TMOD: timer 1, mode 2, 8-bit reload        */
    TH1   = 221;                /* TH1:  reload value for 1200 baud @ 16MHz   */
    TR1   = 1;                  /* TR1:  timer 1 run                          */
    TI    = 1;                  /* TI:   set TI to send first char of UART    */
#endif
/*------------------------------------------------
Note that an embedded program never exits (because
there is no operating system to return to).  It
must loop and execute forever.
------------------------------------------------*/
	for( n = 0 ; n <= 9 ; n++)
		scanf ( "%d" , &a[n]) ;
	max = sub_max (ptr,10) ;
	printf("max=%d\n",max) ;
    while (1) {};
}
int sub_max(int *b,int i)/*形式参数为指针变量*/
{
	int temp,j;
	temp=b[0] ;/*数组元素指针的下标法表示*/
	for( j = 1 ; j <= i - 1 ; j++ )
		if(temp<b[j]) temp=b[j];
		return temp;
}