iso7816.txt

来自「智能卡ISO7816规则(英文) 国内中文版很少,而英文版更容易理解.」· 文本 代码 · 共 72 行

<PRE>
===============================================================================
                ISO7816 asynchronous smartcard information
===============================================================================

                        (C) Stephane BAUSSON - (95)
                   Version 1.00 (Last revised: 12-06-1995)

                             4, Rue de Grand
                            F-88630 Chermisey
                                 France

-------------------------------------------------------------------------------
>>> Any suggestions or comments about phonecards and smartcards are welcome <<<
-------------------------------------------------------------------------------

This file is archived at nic.funet.fi:/pub/doc/telecom/phonecard/chips

Document History:
~~~~~~~~~~~~~~~~
    Version 1.00 : First version of the document.

Glossary of terms:
~~~~~~~~~~~~~~~~~~
    TBC : to be confirmed
    TBD : to be defined
-------------------------------------------------------------------------------

                               * Content *
                               ~~~~~~~~~~~
 I ) Introduction of the ISO7816 standard


II ) Summury of the ISO7816 standard

    2.1 - ISO7816-1 Standard

       2.2.1) Minimal Contact Size
       2.2.2) Pin's position


    2.2 - ISO7816-2 Standard

       2.2.3) Pin Assignement
       2.2.4) Contact Location


    2.3 - ISO7816-3 Standard

       2.3.1) Electrical Signals Description:
       2.3.2) Voltage and current values:
       2.3.3) Operating procedure for integrated circuit(s) cards:
       2.3.4) Answer to Reset:

-------------------------------------------------------------------------------

 I ) Introduction of the ISO7816 standard:
     ====================================


II ) Summury of the ISO7816 standard:
     ===============================

    The ISO7816 standard are separated in 3 different parts

     - ISO7816-1 which define the physical characteristics of the card.
     - ISO7816-2 which define dimension and contact position of the card.
     - ISO7816-3 which define the electical signals and transmission protocols.

     The following organisations should be contacted for more details:

       - CEN (Comit