multint.c

ADI公司的ARM7的功能模块的源码

/*********************************************************************

 Author        : ADI - Apps            www.analog.com/MicroConverter

 Date          : Sept. 2005

 File          : MultInt.c

 Hardware      : Applicable to ADuC702x rev H or I silicon
                 Currently targetting ADuC7026.

 Description   : Example program using two IRQs and 1 FIQ.
 				 Timer1 causes an IRQ which compliments P4.2.
 				 XIRQ0 causes an IRQ which compliments P4.2.
 				 ADC causes an FIQ which outputs the value on ADC0 
				 to DAC1.
		
*********************************************************************/

#include <ADuC7026.h>						// 	Include ADuC7026 Header File
											
//	Function Prototypes

void My_IRQ_Function(void);					//	IRQ Function Prototype 
void My_FIQ_Function(void);				 	// 	FIQ Function Prototype
void ADCpoweron(int);
void delay(int);

 void DemoConfig(void);
 long ADCconvert(void);
 void My_IRQ_Function(void);

int main (void)  {

	DemoConfig();						// set up ADC, DAC, & reference

	IRQ = My_IRQ_Function;				// 	Specify Interrupt Service Rountine 
	FIQ = My_FIQ_Function;				// 	Specify Interrupt Service Rountine 

	GP0CON = 0x00100000;				// Enable ADCbusy on Pin 0.5
	GP4DAT = 0x04000000;				// Configure P4.2 as output
	GP3DAT = 0xff000000;				// Configure port 3 as output
										// Timer 1 configuration
	T1LD = 0x20000;						// Counter Value
	T1CON = 0xC4;						// Enabled,Periodic,Binary and CLK/16

	IRQEN = XIRQ0_BIT+GP_TIMER_BIT;		//	Enable XIRQ0 and Timer1 IRQ
	FIQEN = ADC_BIT;					//	Enable ADC FIQ

	while(1) {
		GP3DAT ^= 0x00ff0000;			// Compliment P3 
		ADCCON = 0x6E3;					// single conversion 
		delay(0x2000);					// Delay Blinking of P3
	}
	
	return 0 ;
}

void delay (int length) {
while (length >=0)
    length--;
}

void DemoConfig(void) {				// ADC, DAC and Reference configuration
	ADCpoweron(20000);				// power on ADC
	ADCCP = 0x00;					// conversion on ADC0
	DAC1CON = 0x13;					// AGND-AVDD range
	REFCON = 0x01;					// internal 2.5V reference
	return;
}

void ADCpoweron(int time) {
	ADCCON = 0x20;	 					// power-on the ADC
	while (time >=0)	  				// wait for ADC to be fully powered on
    time--;
}


/********************************************************************/
/*                                                                  */
/*		Interrupt Service Rountine									*/
/*                                                                  */
/********************************************************************/


void My_IRQ_Function() {						// example with two IRQ
			
	if ((IRQSTA & GP_TIMER_BIT) != 0) {	 		// Timer1 IRQ?
		T1CLRI = 0;								// Clear Timer IRQ
		GP4DAT ^= 0x00040000;					// Complement P4.2
	} 				
	if ((IRQSTA & XIRQ0_BIT) != 0) {			// external IRQ?
		GP4DAT ^= 0x00040000;					// Complement P4.2
		while(GP0DAT & 0x00010){}				// wait for XIRQ to be low again
	}			 
	return ;
} 

void My_FIQ_Function() {						// example with one FIQ			
	if ((FIQSTA & ADC_BIT) != 0) 				// ADC FIQ ?
		DAC1DAT = ADCDAT;						// Output ADC0 Value onto DAC1
	return ;
}