i2c.mpf

Xilinx ISE 官方源代码盘第十章

; %O - Process name
; %K - Kind of object path is to return: Instance, Signal, Process or Unknown
; %P - Instance or Region path without leaf process
; %F - File
; %L - Line number of assertion or, if assertion is in a subprogram, line
;      from which the call is made
; %% - Print '%' character
; If specific format for assertion level is defined, use its format.
; If specific format is not define for assertion level, use AssertionFormatBreak
; if assertion triggers a breakpoint (controlled by BreakOnAssertion level),
; otherwise use AssertionFormat.
;
; AssertionFormat = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatBreak   = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatNote    = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatWarning = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatError   = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatFail    = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatFatal  = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; Assertion File - alternate file for storing assertion messages
; AssertFile = assert.log

; Default radix for all windows and commands.
; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned
DefaultRadix = symbolic

; VSIM Startup command
; Startup = do startup.do

; File for saving command transcript
TranscriptFile = transcript

; File for saving command history
; CommandHistory = cmdhist.log

; Specify whether paths in simulator commands should be described
; in VHDL or Verilog format.
; For VHDL, PathSeparator = /
; For Verilog, PathSeparator = .
; Must not be the same character as DatasetSeparator.
PathSeparator = /

; Specify the dataset separator for fully rooted contexts.
; The default is ':'. For example: sim:/top
; Must not be the same character as PathSeparator.
DatasetSeparator = :

; Disable assertion messages
; IgnoreNote = 1
; IgnoreWarning = 1
; IgnoreError = 1
; IgnoreFailure = 1

; Default force kind. May be freeze, drive, or deposit
; or in other terms, fixed, wired, or charged.
; DefaultForceKind = freeze

; If zero, open files when elaborated; otherwise, open files on
; first read or write.  Default is 0.
; DelayFileOpen = 1

; Control VHDL files opened for write.
;   0 = Buffered, 1 = Unbuffered
UnbufferedOutput = 0

; Control the number of VHDL files open concurrently.
; This number should always be less than the current ulimit
; setting for max file descriptors.
;   0 = unlimited
ConcurrentFileLimit = 40

; Control the number of hierarchical regions displayed as
; part of a signal name shown in the Wave window.
; A value of zero tells VSIM to display the full name.
; The default is 0.
; WaveSignalNameWidth = 0

; Turn off warnings from the std_logic_arith, std_logic_unsigned
; and std_logic_signed packages.
; StdArithNoWarnings = 1

; Turn off warnings from the IEEE numeric_std and numeric_bit packages.
; NumericStdNoWarnings = 1

; Control the format of a generate statement label. Do not quote it.
; GenerateFormat = %s__%d

; Specify whether checkpoint files should be compressed.
; The default is 1 (compressed).
; CheckpointCompressMode = 0

; List of dynamically loaded objects for Verilog PLI applications
; Veriuser = veriuser.sl

; Specify default options for the restart command. Options can be one
; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions
; DefaultRestartOptions = -force

; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs
; (> 500 megabyte memory footprint). Default is disabled.
; Specify number of megabytes to lock.
; LockedMemory = 1000

; HP-UX 11.00 ONLY - Use /usr/lib/libCsup_v2.sl for shared object loading.
; This is necessary when C++ files have been compiled with aCC's -AA option.
; The default behavior is to use /usr/lib/libCsup.sl.
; UseCsupV2 = 1

; Turn on (1) or off (0) WLF file compression.
; The default is 1 (compress WLF file).
; WLFCompress = 0

; Specify whether to save all design hierarchy (1) in the WLF file
; or only regions containing logged signals (0).
; The default is 0 (log only regions with logged signals).
; WLFSaveAllRegions = 1

; WLF file time limit.  Limit WLF file by time, as closely as possible,
; to the specified amount of simulation time.  When the limit is exceeded
; the earliest times get truncated from the file.
; If both time and size limits are specified the most restrictive is used.
; UserTimeUnits are used if time units are not specified.
; The default is 0 (no limit).  Example: WLFTimeLimit = {100 ms}
; WLFTimeLimit = 0

; WLF file size limit.  Limit WLF file size, as closely as possible,
; to the specified number of megabytes.  If both time and size limits
; are specified then the most restrictive is used.
; The default is 0 (no limit).
; WLFSizeLimit = 1000

; Specify whether or not a WLF file should be deleted when the
; simulation ends.  A value of 1 will cause the WLF file to be deleted.
; The default is 0 (do not delete WLF file when simulation ends).
; WLFDeleteOnQuit = 1

; Specify whether or not integer arrays will appear as memories.
; The default is 1 (display integer arrays as memories).
; ShowIntMem = 0

; Specify whether or not enumerated type arrays (other than std_logic-based)
; will appear as memories.
; The default is 1 (display enumerated type arrays as memories).
; ShowEnumMem = 0

; Specify whether or not arrays of 3 or more dimensions will appear as memories.
; The default is 1 (display 3D+ type arrays as memories).
; Show3DMem = 0

[lmc]
; ModelSim's interface to Logic Modeling's SmartModel SWIFT software
libsm = $MODEL_TECH/libsm.sl
; ModelSim's interface to Logic Modeling's SmartModel SWIFT software (Windows NT)
; libsm = $MODEL_TECH/libsm.dll
;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700)
; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl
;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000)
; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o
;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris)
; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so
;  Logic Modeling's SmartModel SWIFT software (Windows NT)
; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll
;  Logic Modeling's SmartModel SWIFT software (Linux)
; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so

; ModelSim's interface to Logic Modeling's hardware modeler SFI software
libhm = $MODEL_TECH/libhm.sl
; ModelSim's interface to Logic Modeling's hardware modeler SFI software (Windows NT)
; libhm = $MODEL_TECH/libhm.dll
;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700)
; libsfi = <sfi_dir>/lib/hp700/libsfi.sl
;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000)
; libsfi = <sfi_dir>/lib/rs6000/libsfi.a
;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris)
; libsfi = <sfi_dir>/lib/sun4.solaris/libsfi.so
;  Logic Modeling's hardware modeler SFI software (Windows NT)
; libsfi = <sfi_dir>/lib/pcnt/lm_sfi.dll
;  Logic Modeling's hardware modeler SFI software (Linux)
; libsfi = <sfi_dir>/lib/linux/libsfi.so
[Project]
Project_Version = 5
Project_DefaultLib = work
Project_SortMethod = unused
Project_Files_Count = 8
Project_File_0 = D:/My_Design/Example-10-1/I2C/source/pullup.v
Project_File_P_0 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 1090232155 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 0 dont_compile 0 cover_stmt 1
Project_File_1 = D:/My_Design/Example-10-1/I2C/source/shift.vhd
Project_File_P_1 = vhdl_novitalcheck 0 vlog_protect 0 vhdl_1164 1 vhdl_nodebug 0 file_type VHDL group_id 0 vhdl_noload 0 vhdl_synth 0 vlog_1995compat 0 vlog_nodebug 0 vhdl_disableopt 0 folder {Top Level} last_compile 1086611277 vlog_noload 0 vhdl_vital 0 vhdl_warn1 1 vlog_disableopt 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 vlog_hazard 0 vlog_showsource 0 vhdl_warn5 1 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 3 dont_compile 0 vhdl_use93 2002 cover_stmt 1
Project_File_2 = D:/My_Design/Example-10-1/I2C/source/tb.v
Project_File_P_2 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 1090806608 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 2 dont_compile 0 cover_stmt 1
Project_File_3 = D:/My_Design/Example-10-1/I2C/source/upcnt4.vhd
Project_File_P_3 = vhdl_novitalcheck 0 vlog_protect 0 vhdl_1164 1 vhdl_nodebug 0 file_type VHDL group_id 0 vhdl_noload 0 vhdl_synth 0 vlog_1995compat 0 vlog_nodebug 0 vhdl_disableopt 0 folder {Top Level} last_compile 1086611277 vlog_noload 0 vhdl_vital 0 vhdl_warn1 1 vlog_disableopt 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 vlog_hazard 0 vlog_showsource 0 vhdl_warn5 1 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 4 dont_compile 0 vhdl_use93 2002 cover_stmt 1
Project_File_4 = D:/My_Design/Example-10-1/I2C/source/i2c.vhd
Project_File_P_4 = vhdl_novitalcheck 0 vlog_protect 0 vhdl_1164 1 vhdl_nodebug 0 file_type VHDL group_id 0 vhdl_noload 0 vhdl_synth 0 vlog_1995compat 0 vlog_nodebug 0 vhdl_disableopt 0 folder {Top Level} last_compile 1090233145 vlog_noload 0 vhdl_vital 0 vhdl_warn1 1 vlog_disableopt 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 vlog_hazard 0 vlog_showsource 0 vhdl_warn5 1 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 7 dont_compile 0 vhdl_use93 2002 cover_stmt 1
Project_File_5 = D:/My_Design/Example-10-1/I2C/source/i2c_control.vhd
Project_File_P_5 = vhdl_novitalcheck 0 vlog_protect 0 vhdl_1164 1 vhdl_nodebug 0 file_type VHDL group_id 0 vhdl_noload 0 vhdl_synth 0 vlog_1995compat 0 vlog_nodebug 0 vhdl_disableopt 0 folder {Top Level} last_compile 1086611277 vlog_noload 0 vhdl_vital 0 vhdl_warn1 1 vlog_disableopt 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 vlog_hazard 0 vlog_showsource 0 vhdl_warn5 1 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 6 dont_compile 0 vhdl_use93 2002 cover_stmt 1
Project_File_6 = D:/My_Design/Example-10-1/I2C/source/uc_interface.vhd
Project_File_P_6 = vhdl_novitalcheck 0 vlog_protect 0 vhdl_1164 1 vhdl_nodebug 0 file_type VHDL group_id 0 vhdl_noload 0 vhdl_synth 0 vlog_1995compat 0 vlog_nodebug 0 vhdl_disableopt 0 folder {Top Level} last_compile 1086611277 vlog_noload 0 vhdl_vital 0 vhdl_warn1 1 vlog_disableopt 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 vlog_hazard 0 vlog_showsource 0 vhdl_warn5 1 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 5 dont_compile 0 vhdl_use93 2002 cover_stmt 1
Project_File_7 = D:/My_Design/Example-10-1/I2C/source/At24c02.v
Project_File_P_7 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 1090233136 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 1 dont_compile 0 cover_stmt 1
Project_Sim_Count = 0
Project_Folder_Count = 0
Echo_Compile_Output = 0
Save_Compile_Report = 1
VHDL_DoubleClick = Edit
VERILOG_DoubleClick = Edit
SYSTEMC_DoubleClick = Edit
TCL_DoubleClick = Edit
TEXT_DoubleClick = Edit
VHDL_CustomDoubleClick = 
VERILOG_CustomDoubleClick = 
SYSTEMC_CustomDoubleClick = 
TCL_CustomDoubleClick = 
TEXT_CustomDoubleClick = 
ForceSoftPaths = 0