syscfg.h

coldfire5206芯片平台的升级程序

	MAP_IBP_ALM_REC_LEV_200FLAG_RTT,
	//IBP单位1、扫描速度2,滤波模式（平滑、正常、不滤波）2,幅度调节模式（自动、手动）1,压力选择2
	MAP_IBP_UNIT_SWEEP_FILTER_AMP_AUX,
	//ART_S报警高限高8
	MAP_IBP_ART_SYS_HI_H,
	//ART_S报警高限低8
	MAP_IBP_ART_SYS_HI_L,
	//ART_S报警低限高8
	MAP_IBP_ART_SYS_LO_H,
	//ART_S报警低限低8
	MAP_IBP_ART_SYS_LO_L,
	//ART_D报警高限高8
	MAP_IBP_ART_DIA_HI_H,
	//ART_D报警高限低8
	MAP_IBP_ART_DIA_HI_L,
	//ART_D报警低限高8
	MAP_IBP_ART_DIA_LO_H,
	//ART_D报警低限低8
	MAP_IBP_ART_DIA_LO_L,
	//ART_M报警高限高8
	MAP_IBP_ART_MAP_HI_H,
	//ART_M报警高限低8
	MAP_IBP_ART_MAP_HI_L,
	//ART_M报警低限高8
	MAP_IBP_ART_MAP_LO_H,
	//ART_M报警低限低8
	MAP_IBP_ART_MAP_LO_L,
	//PA_S报警高限8（所有值加10处理）
	MAP_IBP_PA_SYS_HI,
	//PA_S报警低限8
	MAP_IBP_PA_SYS_LO,
	//PA_D报警高限8
	MAP_IBP_PA_DIA_HI,
	//PA_D报警低限8
	MAP_IBP_PA_DIA_LO,
	//PA_M报警高限8
	MAP_IBP_PA_MAP_HI,
	//PA_M报警低限8
	MAP_IBP_PA_MAP_LO,
	//CVP_M报警高限8
	MAP_IBP_CVP_MAP_HI,
	//CVP_M报警低限8
	MAP_IBP_CVP_MAP_LO,
	//LAP_M报警高限8
	MAP_IBP_LAP_MAP_HI,
	//LAP_M报警低限8
	MAP_IBP_LAP_MAP_LO,
	//RAP_M报警高限8
	MAP_IBP_RAP_MAP_HI,
	//RAP_M报警低限8
	MAP_IBP_RAP_MAP_LO,
	//ICP_M报警高限8
	MAP_IBP_ICP_MAP_HI,
	//ICP_M报警低限8
	MAP_IBP_ICP_MAP_LO,

	//P1_S报警高限高8
	MAP_IBP_P1_SYS_HI_H,
	//P1_S报警高限低8
	MAP_IBP_P1_SYS_HI_L,
	//P1_S报警低限高8
	MAP_IBP_P1_SYS_LO_H,
	//P1_S报警低限低8
	MAP_IBP_P1_SYS_LO_L,
	//P1_D报警高限高8
	MAP_IBP_P1_DIA_HI_H,
	//P1_D报警高限低8
	MAP_IBP_P1_DIA_HI_L,
	//P1_D报警低限高8
	MAP_IBP_P1_DIA_LO_H,
	//P1_D报警低限低8
	MAP_IBP_P1_DIA_LO_L,
	//P1_M报警高限高8
	MAP_IBP_P1_MAP_HI_H,
	//P1_M报警高限低8
	MAP_IBP_P1_MAP_HI_L,
	//P1_M报警低限高8
	MAP_IBP_P1_MAP_LO_H,
	//P1_M报警低限低8
	MAP_IBP_P1_MAP_LO_L,
	//P2_S报警高限高8
	MAP_IBP_P2_SYS_HI_H,
	//P2_S报警高限低8
	MAP_IBP_P2_SYS_HI_L,
	//P2_S报警低限高8
	MAP_IBP_P2_SYS_LO_H,
	//P2_S报警低限低8
	MAP_IBP_P2_SYS_LO_L,
	//P2_D报警高限高8
	MAP_IBP_P2_DIA_HI_H,
	//P2_D报警高限低8
	MAP_IBP_P2_DIA_HI_L,
	//P2_D报警低限高8
	MAP_IBP_P2_DIA_LO_H,
	//P2_D报警低限低8
	MAP_IBP_P2_DIA_LO_L,
	//P2_M报警高限高8
	MAP_IBP_P2_MAP_HI_H,
	//P2_M报警高限低8
	MAP_IBP_P2_MAP_HI_L,
	//P2_M报警低限高8
	MAP_IBP_P2_MAP_LO_H,
	//P2_M报警低限低8
	MAP_IBP_P2_MAP_LO_L,

	//ART标尺高限高8
	MAP_IBP_LAB_ART_HI_H,  
	//ART标尺高限低8
	MAP_IBP_LAB_ART_HI_L,  
	//ART标尺低限高8
	MAP_IBP_LAB_ART_LO_H,
	//ART标尺低限低8
	MAP_IBP_LAB_ART_LO_L,
	//PA标尺高限
	MAP_IBP_LAB_PA_HI,
	//PA标尺低限
	MAP_IBP_LAB_PA_LO,
	//CVP标尺高限
	MAP_IBP_LAB_CVP_HI,
	//CVP标尺低限
	MAP_IBP_LAB_CVP_LO,
	//RAP标尺高限
	MAP_IBP_LAB_RAP_HI,
	//RAP标尺低限
	MAP_IBP_LAB_RAP_LO,
	//LAP标尺高限
	MAP_IBP_LAB_LAP_HI,
	//LAP标尺低限
	MAP_IBP_LAB_LAP_LO,
	//ICP标尺高限
	MAP_IBP_LAB_ICP_HI,
	//ICP标尺低限
	MAP_IBP_LAB_ICP_LO,  
	//P1标尺高限高8
	MAP_IBP_LAB_P1_HI_H,
	//P1标尺高限低8
	MAP_IBP_LAB_P1_HI_L,
	//P1标尺低限高8
	MAP_IBP_LAB_P1_LO_H,  
	//P1标尺低限低8
	MAP_IBP_LAB_P1_LO_L,  
	//P2标尺高限高8
	MAP_IBP_LAB_P2_HI_H,
	//P2标尺高限低8
	MAP_IBP_LAB_P2_HI_L,
	//P2标尺低限高8
	MAP_IBP_LAB_P2_LO_H,  
	//P2标尺低限低8
	MAP_IBP_LAB_P2_LO_L,  
	//IBP CH1、CH2 NAME
	MAP_IBP_CH1NAME_CH2NAME,
	//IBP CH1 校零值-高8位
	MAP_IBP_CH1_ZEROVAL_HI,
	//IBP CH1 校零值-低8位
	MAP_IBP_CH1_ZEROVAL_LO,
	//IBP CH2 校零值-高8位
	MAP_IBP_CH2_ZEROVAL_HI,
	//IBP CH2 校零值-低8位
	MAP_IBP_CH2_ZEROVAL_LO,
	//IBP CH1 校准时间--年高8位
	MAP_IBP_CH1CAL_YEAR_HI,  
	//IBP CH1 校准时间--年低8位
	MAP_IBP_CH1CAL_YEAR_LO,  
	//IBP CH1 校准时间--月
	MAP_IBP_CH1CAL_MONTH,        
	//IBP CH1 校准时间--日
	MAP_IBP_CH1CAL_DATE,         
	//IBP CH1 校准时间--小时
	MAP_IBP_CH1CAL_HOUR,         
	//IBP CH1 校准时间--分
	MAP_IBP_CH1CAL_MINUTE,    
	//IBP CH1 校准时间--秒
	MAP_IBP_CH1CAL_SECOND,
	//IBP CH1 校准值
	MAP_IBP_CH1CAL_CAL_VAL,   
	//IBP CH1 测量值
	MAP_IBP_CH1CAL_REAL_VAL,  
	//IBP CH2 校准时间--年高8位
	MAP_IBP_CH2CAL_YEAR_HI,       
	//IBP CH2 校准时间--年低8位
	MAP_IBP_CH2CAL_YEAR_LO,       
	//IBP CH2 校准时间--月
	MAP_IBP_CH2CAL_MONTH,        
	//IBP CH2 校准时间--日
	MAP_IBP_CH2CAL_DATE,        
	//IBP CH2 校准时间--小时
	MAP_IBP_CH2CAL_HOUR,         
	//IBP CH2 校准时间--分
	MAP_IBP_CH2CAL_MINUTE,       
	//IBP CH2 校准时间--秒
	MAP_IBP_CH2CAL_SECOND,    
	//IBP CH2 校准值
	MAP_IBP_CH2CAL_CAL_VAL,     
	//IBP CH2 测量值
	MAP_IBP_CH2CAL_REAL_VAL, 
	// 注意：不要把有关IBP1的掉电存储的数据放在这之后

	//--------------------------IBP2模块-------------------------------------------
	// 注意：不要把有关IBP2的掉电存储的数据放在这之前
	//报警开关1、报警记录开关1、报警级别2、ART_S和ART_D和ART_M超过200标志，为1为超出：300-VAL,实时转移开关1
	MAP_IBP2_ALM_REC_LEV_200FLAG_RTT,
	//IBP单位1、扫描速度2,滤波模式（平滑、正常、不滤波）2,幅度调节模式（自动、手动）1,压力选择2
	MAP_IBP2_UNIT_SWEEP_FILTER_AMP_AUX,
	//ART_S报警高限高8
	MAP_IBP2_ART_SYS_HI_H,
	//ART_S报警高限低8
	MAP_IBP2_ART_SYS_HI_L,
	//ART_S报警低限高8
	MAP_IBP2_ART_SYS_LO_H,
	//ART_S报警低限低8
	MAP_IBP2_ART_SYS_LO_L,
	//ART_D报警高限高8
	MAP_IBP2_ART_DIA_HI_H,
	//ART_D报警高限低8
	MAP_IBP2_ART_DIA_HI_L,
	//ART_D报警低限高8
	MAP_IBP2_ART_DIA_LO_H,
	//ART_D报警低限低8
	MAP_IBP2_ART_DIA_LO_L,
	//ART_M报警高限高8
	MAP_IBP2_ART_MAP_HI_H,
	//ART_M报警高限低8
	MAP_IBP2_ART_MAP_HI_L,
	//ART_M报警低限高8
	MAP_IBP2_ART_MAP_LO_H,
	//ART_M报警低限低8
	MAP_IBP2_ART_MAP_LO_L,
	//PA_S报警高限8（所有值加10处理）
	MAP_IBP2_PA_SYS_HI,
	//PA_S报警低限8
	MAP_IBP2_PA_SYS_LO,
	//PA_D报警高限8
	MAP_IBP2_PA_DIA_HI,
	//PA_D报警低限8
	MAP_IBP2_PA_DIA_LO,
	//PA_M报警高限8
	MAP_IBP2_PA_MAP_HI,
	//PA_M报警低限8
	MAP_IBP2_PA_MAP_LO,
	//CVP_M报警高限8
	MAP_IBP2_CVP_MAP_HI,
	//CVP_M报警低限8
	MAP_IBP2_CVP_MAP_LO,
	//LAP_M报警高限8
	MAP_IBP2_LAP_MAP_HI,
	//LAP_M报警低限8
	MAP_IBP2_LAP_MAP_LO,
	//RAP_M报警高限8
	MAP_IBP2_RAP_MAP_HI,
	//RAP_M报警低限8
	MAP_IBP2_RAP_MAP_LO,
	//ICP_M报警高限8
	MAP_IBP2_ICP_MAP_HI,
	//ICP_M报警低限8
	MAP_IBP2_ICP_MAP_LO,

	//P1_S报警高限高8
	MAP_IBP2_P1_SYS_HI_H,
	//P1_S报警高限低8
	MAP_IBP2_P1_SYS_HI_L,
	//P1_S报警低限高8
	MAP_IBP2_P1_SYS_LO_H,
	//P1_S报警低限低8
	MAP_IBP2_P1_SYS_LO_L,
	//P1_D报警高限高8
	MAP_IBP2_P1_DIA_HI_H,
	//P1_D报警高限低8
	MAP_IBP2_P1_DIA_HI_L,
	//P1_D报警低限高8
	MAP_IBP2_P1_DIA_LO_H,
	//P1_D报警低限低8
	MAP_IBP2_P1_DIA_LO_L,
	//P1_M报警高限高8
	MAP_IBP2_P1_MAP_HI_H,
	//P1_M报警高限低8
	MAP_IBP2_P1_MAP_HI_L,
	//P1_M报警低限高8
	MAP_IBP2_P1_MAP_LO_H,
	//P1_M报警低限低8
	MAP_IBP2_P1_MAP_LO_L,
	//P2_S报警高限高8
	MAP_IBP2_P2_SYS_HI_H,
	//P2_S报警高限低8
	MAP_IBP2_P2_SYS_HI_L,
	//P2_S报警低限高8
	MAP_IBP2_P2_SYS_LO_H,
	//P2_S报警低限低8
	MAP_IBP2_P2_SYS_LO_L,
	//P2_D报警高限高8
	MAP_IBP2_P2_DIA_HI_H,
	//P2_D报警高限低8
	MAP_IBP2_P2_DIA_HI_L,
	//P2_D报警低限高8
	MAP_IBP2_P2_DIA_LO_H,
	//P2_D报警低限低8
	MAP_IBP2_P2_DIA_LO_L,
	//P2_M报警高限高8
	MAP_IBP2_P2_MAP_HI_H,
	//P2_M报警高限低8
	MAP_IBP2_P2_MAP_HI_L,
	//P2_M报警低限高8
	MAP_IBP2_P2_MAP_LO_H,
	//P2_M报警低限低8
	MAP_IBP2_P2_MAP_LO_L,

	//ART标尺高限高8
	MAP_IBP2_LAB_ART_HI_H,  
	//ART标尺高限低8
	MAP_IBP2_LAB_ART_HI_L,  
	//ART标尺低限高8
	MAP_IBP2_LAB_ART_LO_H,
	//ART标尺低限低8
	MAP_IBP2_LAB_ART_LO_L,
	//PA标尺高限
	MAP_IBP2_LAB_PA_HI,
	//PA标尺低限
	MAP_IBP2_LAB_PA_LO,
	//CVP标尺高限
	MAP_IBP2_LAB_CVP_HI,
	//CVP标尺低限
	MAP_IBP2_LAB_CVP_LO,
	//RAP标尺高限
	MAP_IBP2_LAB_RAP_HI,
	//RAP标尺低限
	MAP_IBP2_LAB_RAP_LO,
	//LAP标尺高限
	MAP_IBP2_LAB_LAP_HI,
	//LAP标尺低限
	MAP_IBP2_LAB_LAP_LO,
	//ICP标尺高限
	MAP_IBP2_LAB_ICP_HI,
	//ICP标尺低限
	MAP_IBP2_LAB_ICP_LO,  
	//AUXP1标尺高限高8
	MAP_IBP2_LAB_P1_HI_H,  
	//AUXP1标尺高限低8
	MAP_IBP2_LAB_P1_HI_L,  
	//AUXP1标尺低限高8
	MAP_IBP2_LAB_P1_LO_H,
	//AUXP1标尺低限低8
	MAP_IBP2_LAB_P1_LO_L,
	//AUXP2标尺高限高8
	MAP_IBP2_LAB_P2_HI_H,  
	//AUXP2标尺高限低8
	MAP_IBP2_LAB_P2_HI_L,  
	//AUXP2标尺低限高8
	MAP_IBP2_LAB_P2_LO_H,
	//AUXP2标尺低限低8
	MAP_IBP2_LAB_P2_LO_L,
	//IBP2 CH1、CH2 NAME
	MAP_IBP2_CH1NAME_CH2NAME,
	//IBP2 CH1 校零值-高8位
	MAP_IBP2_CH1_ZEROVAL_HI,
	//IBP2 CH1 校零值-低8位
	MAP_IBP2_CH1_ZEROVAL_LO,
	//IBP2 CH2 校零值-高8位
	MAP_IBP2_CH2_ZEROVAL_HI,
	//IBP2 CH2 校零值-低8位
	MAP_IBP2_CH2_ZEROVAL_LO,
	//IBP2 CH1 校准时间--年高8位
	MAP_IBP2_CH1CAL_YEAR_HI,  
	//IBP2 CH1 校准时间--年低8位
	MAP_IBP2_CH1CAL_YEAR_LO,  
	//IBP2 CH1 校准时间--月
	MAP_IBP2_CH1CAL_MONTH,        
	//IBP2 CH1 校准时间--日
	MAP_IBP2_CH1CAL_DATE,         
	//IBP2 CH1 校准时间--小时
	MAP_IBP2_CH1CAL_HOUR,         
	//IBP2 CH1 校准时间--分
	MAP_IBP2_CH1CAL_MINUTE,    
	//IBP2 CH1 校准时间--秒
	MAP_IBP2_CH1CAL_SECOND,    
	//IBP2 CH1 校准值
	MAP_IBP2_CH1CAL_CAL_VAL,   
	//IBP2 CH1 测量值
	MAP_IBP2_CH1CAL_REAL_VAL,  
	//IBP2 CH2 校准时间--年高8位
	MAP_IBP2_CH2CAL_YEAR_HI,       
	//IBP2 CH2 校准时间--年低8位
	MAP_IBP2_CH2CAL_YEAR_LO,       
	//IBP2 CH2 校准时间--月
	MAP_IBP2_CH2CAL_MONTH,        
	//IBP2 CH2 校准时间--日
	MAP_IBP2_CH2CAL_DATE,        
	//IBP2 CH2 校准时间--小时
	MAP_IBP2_CH2CAL_HOUR,         
	//IBP2 CH2 校准时间--分
	MAP_IBP2_CH2CAL_MINUTE,       
	//IBP2 CH2 校准时间--秒
	MAP_IBP2_CH2CAL_SECOND,
	//IBP2 CH2 校准值
	MAP_IBP2_CH2CAL_CAL_VAL,     
	//IBP2 CH2 测量值
	MAP_IBP2_CH2CAL_REAL_VAL, 
	// 注意：不要把有关IBP2的掉电存储的数据放在这之后

	//-------------------------CO模块------------------------
	// 注意：不要把有关CO的掉电存储的数据放在这之前
	//报警开关1、报警记录开关1、报警级别2, 实时转移开关1
	MAP_CO_ALM_REC_LEV_RTT,
	//TB高限高8
	MAP_CO_TB_HLIMIT_HI,
	//TB高限低8
	MAP_CO_TB_HLIMIT_LO,
	//TB低限高8
	MAP_CO_TB_LLIMIT_HI,
	//TB低限低8
	MAP_CO_TB_LLIMIT_LO,
	//常数1高8
	MAP_CO_CONT_HI,
	//常数1低8
	MAP_CO_CONT_LO,
	//常数2高8
	MAP_CO_CONTK_HI, 
	//常数2低8
	MAP_CO_CONTK_LO, 
	//测量间隔时间高8
	MAP_CO_INTTIME_HI,
	//测量间隔时间低8
	MAP_CO_INTTIME_LO,
	//注射液温度高8
	MAP_CO_INJTEMP_HI,
	//注射液温度低8
	MAP_CO_INJTEMP_LO,
	//注射液开关1、温度单位1
	MAP_CO_INJ_TBUNIT,
	// 注意：不要把有关CO的掉电存储的数据放在这之后

	//-------------------CO2模块------------------------
	// 注意：不要把有关CO2的掉电存储的数据放在这之前
	//报警开关1、报警记录开关1、报警级别2、实时转移开关1
	MAP_CO2_ALM_REC_LEV_RTT,
	//CO2报警高限8、
	MAP_CO2_ETCO2_HLIMIT,
	//CO2报警低限8、
	MAP_CO2_ETCO2_LLIMIT,
	//InsCO2高限8、
	MAP_CO2_INSCO2_HLIMIT,
	//AwRR报警高限8、
	MAP_CO2_AWRR_HLIMIT,
	//AwRR报警低限8、
	MAP_CO2_AWRR_LLIMIT,
	//AwRR窒息时间8、
	MAP_CO2_AWRR_ASPHYXIATIME,
	//波形速度2、波形幅度1、测量方式1、抽气速度2、单位1
	MAP_CO2_SWEEP_WAVEHIGHT_MODE_SPEED_UNIT,
	//补偿方式3 , 水汽补偿开关1,BTPS开关
	MAP_CO2_COMPENSATE_BTPS,
	// 注意：不要把有关CO2的掉电存储的数据放在这之后	
	//校验和
	MAP_MAX
	
}SAVE_CONFIG_ADDR_MAP;

#endif