log.shaper

来自「No7信令,我需要交换类似的代码, 请店长审核,谢谢了,急着交换,谢谢」· SHAPER 代码 · 共 2,247 行 · 第 1/5 页

    FISU (ff/ff) ---------------->
                                  !in service

Test case:
    FISU (ff/7f) (bad fib)------->
    FISU (ff/7f) (bad fib)------->
                                  !out of service (FIBR)
                 <---------------- SIOS (ff/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 3.3
Transmission Failure
Link aligned not ready (Break Tx path)

Precondition:
                                  :open
                                  :power on

Test case:
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :set lpo
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIN  (ff/ff) ---------------->
                 <---------------- SIPO (ff/ff)
   :break Tx
                 ??INCONCLUSIVE???

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** INCONCLUSIVE(3) - test case inconclusive in state 3.
********


Q.781/Test 3.4
Transmission Failure
Link aligned not ready (Corrupt FIBs - Basic)

Precondition:
                                  :open
                                  :power on

Test case:
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :set lpo
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIN  (ff/ff) ---------------->
                 <---------------- SIPO (ff/ff)
    FISU (ff/7f) (bad fib)------->
    FISU (ff/7f) (bad fib)------->
                                  !out of service (FIBR)
                 <---------------- SIOS (ff/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 3.5
Transmission Failure
Link in service (Break Tx path)

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
   :break Tx
                 ??INCONCLUSIVE???

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** INCONCLUSIVE(0) - test case inconclusive in state 0.
********


Q.781/Test 3.6
Transmission Failure
Link in service (Corrupt FIBs - Basic)

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
    FISU (ff/7f) (bad fib)------->
    FISU (ff/7f) (bad fib)------->
                                  !out of service (FIBR)
                 <---------------- SIOS (ff/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 3.7
Transmission Failure
Link in processor outage (Break Tx path)

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
                                  :set lpo
                                  !rpr
                 <---------------- SIPO (ff/ff)
   :break Tx
                 ??INCONCLUSIVE???

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** INCONCLUSIVE(1) - test case inconclusive in state 1.
********


Q.781/Test 3.8
Transmission Failure
Link in processor outage (Corrupt FIBs - Basic)

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
                                  :set lpo
                                  !rpr
                 <---------------- SIPO (ff/ff)
    FISU (ff/7f) (bad fib)------->
    FISU (ff/7f) (bad fib)------->
                                  !out of service (FIBR)
                 <---------------- SIOS (ff/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 4.1
Processor Outage Control
Set and clear LPO while link in service

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
                                  :msu
                 <---------------- MSU  (ff/80)[35]
                 <---------------- FISU (ff/80)
    FISU (80/ff) ---------------->
                 <---------------- MSU  (ff/81)[35]
                                  :set lpo
    MSU  (80/80) ---------------->
                                  !rpr
                 <---------------- FISU (ff/81)
    FISU (80/80) ---------------->
                 <---------------- SIPO (ff/81)
                                  :clear buffers
                                  :msu
                 <---------------- SIPO (ff/80)
                 check b/f sn/ib:  ---> (ff/80)
                                  :clear lpo
                 <---------------- MSU  (ff/81)[35]
                 check b/f sn/ib:  ---> (ff/81)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                 <---------------- FISU (ff/81)
                 <---------------- SIOS (ff/81)
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 4.2
Processor Outage Control
RPO during LPO

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
                                  :set lpo
                                  !rpr
                 <---------------- SIPO (ff/ff)
    SIPO (ff/ff) ---------------->
    FISU (ff/ff) ---------------->
                                  !rpo
                 =====SUCCESS=====

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 4.3
Processor Outage Control
Clear LPO when "Both processor outage"

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
                                  :set lpo
   :set lpo
    SIPO (ff/ff) ---------------->
                                  !rpo
                 <---------------- SIPO (ff/ff)
                                  :clear lpo
                 <---------------- FISU (ff/ff)
   :clear lpo
    FISU (ff/ff) ---------------->
                 =====SUCCESS=====

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 5.1
SU delimitation, alignment, error detection and correction
More than 7 ones between MSU opening and closing flags

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
    MSU  (ff/80) (7 ones)-------->
                 ??INCONCLUSIVE???

Postcondition:
                                  :stop
                 <---------------- SIOS (ff/ff)
                                  :close

********
******** INCONCLUSIVE(0) - test case inconclusive in state 0.
********


Q.781/Test 5.2
SU delimitation, alignment, error detection and correction
Greater than maximum signal unit length

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
    MSU  (ff/80) (too long)------>
    FISU (ff/80) ---------------->
                 <---------------- FISU (7f/ff)
                 check b/f sn/ib:  ---> (7f/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                 <---------------- SIOS (7f/ff)
                                  :close

********
******** SUCCESS - test case successful.
********


Q.781/Test 5.3
SU delimitation, alignment, error detection and correction
Below minimum signal unit length

Precondition:
                                  :open
                                  :power on
                 <---------------- SIOS (ff/ff)
    SIOS (ff/ff) ---------------->
                                  :start
                 <---------------- SIO  (ff/ff)
    SIO  (ff/ff) ---------------->
                 <---------------- SIN  (ff/ff)
    SIE  (ff/ff) ---------------->
                 <---------------- FISU (ff/ff)
    FISU (ff/ff) ---------------->
                                  !in service

Test case:
    MSU  (ff/80) (too short)----->
    FISU (ff/80) ---------------->
                 <---------------- FISU (7f/ff)
                 check b/f sn/ib:  ---> (7f/ff)
                 =====SUCCESS=====

Postcondition:
                                  :stop
                 <---------------- SIOS (7f/ff)
                                  :close

********
*****