ss7.7

No7信令,我需要交换类似的代码, 请店长审核,谢谢了,急着交换,谢谢

configuration.
.TP
.B MGMT_NOCONFDATA
The request was missing configuration data (i.e. missing \fBM_DATA\fR block or
\fBM_DATA\fR block too short.
.TP
.B MGMT_BADCONFDATA
Some configuration data was invalid.  The attached \fBM_DATA\fR block contains
\fI0xffffffff\fR in the data elements which are considered invalid.
.RE


.SH "SS7 STREAMS INTERFACES"

The \fIOpenSS7\fR stack provides drivers and modules at all levels of the SS7
stack below ISUP and TCAP.  That is, it provides SS7 Level 2 (Link), SS7 Level
3 (Network), and SCCP (Signalling Connection Control Part) functionality.
These protocol components have been broken into a number of sublevels,
starting from the bottom-most, as follows:
.TP 8
.BR sdli (7)
The \fISignalling Data Link Interface (SDLI)\fR implements SS7 Level 1 [Q702].
SDLI allows real and emulated transmission channels to be implemented for use
under the
.BR sdt (8)
module.  It provides access to the DAEDT and DAEDR
functions of the SS7 Signalling Link [Q703].  Header file \fI<sys/sdli.h>\fR
provides definitions for the interface.  \fIOpenSS7\fR drivers planned or
released at this interface include:
.RS
.TP 12
.BR sdl (8)
SDL module for use by SDLI compliant drivers.
.TP
.BR sdl_eth (8)
SDL emulation using raw Ethernet (IEEE 802.2/802.3).
.TP
.BR sdl_ip (8)
SDL emulation using raw Internet Protocol (IP).
.TP
.BR sdl_udp (8)
SDL emulation using User Datagram Protocol (UDP).
.TP
.BR sdl_tcp (8)
SDL emulation using Transmission Control Protocol (TCP).
.TP
.BR sdl_rtp (8)
SDL emulation using Real-Time Transport Protocol (RTP).
.TP
.BR sdl_sctp (8)
SDL emulation using Strean Control Transport Protocol (SCTP).
.RE
.TP
.BR sdti (7)
The \fISignalling Data Terminal Interface (SDTI)\fR implements partial SS7
Level 2 [Q703].  SDTI allows real and emulated data terminals to be
implemented for use under the
.BR sl (8)
module.  It provides access to the
AERM, SUERM, EIM, DAEDR and DAEDT functions of the SS7 Signalling Link [Q703].
Header file \fI<sys/sdti.h>\fR provides definitions for the interface.
\fIOpenSS7\fR drivers planned or released at this interface include:
.RS
.TP 12
.BR sdt (8)
SDT module for use with SDLI compliant streams.
.TP
.BR vsdt (8)
SDT module for emulating a virtual SDT.
.TP
.BR acb56t (8)
SDT driver for the SeaLevel ACB56 ISA card.
.TP
.BR m2tp (8)
SDT driver for the MTP Level 2 Tunneling Protocol (M2TP).
.TP
.BR soip (8)
SDT driver for SS7 over IP.
.RE
.TP
.BR sli (7)
The \fISignalling Link Interface (SLI)\fR implements complete SS7 Level 2
[Q703].  SLI allows real and emulated signalling links to be implemented for
use under the
.BR sls (8)
module.  It provides access to all SS7 Level 2
state machine functions of the SS7 Signalling Link [Q703].  Header file
\fI<sys/sli.h>\fR provides definitions for the interface.  \fIOpenSS7\fR
drivers planned or released at this interface include:
.RS
.TP 12
.BR sl (8)
SL module for use with SDTI compliant streams.
.TP
.BR vsl (8)
SL module for emulating a virual SL.
.TP
.BR acb56l (8)
SL driver for the SeaLevel ACB56 ISA card.
.TP
.BR m2pa (8)
SL driver for the MTP Level 2 Peer Adaptation (M2PA).
.TP
.BR m2ua (8)
SL driver for the MTP Level User Adaptation (M2UA).
.RE
.TP
.BR slsi (7)
The \fISignalling Link Set Interface (SLSI)\fR implements partial SS7 Level 3
[Q704].  SLSI allows real and emulated signalling link sets to be implemented
for use under the
.BR mtp (8)
multipexor.  It provides access to SS7 Level 3
Link Set state machine functions of the SS7 Message Transfer Part [Q704].
Header file \fI<sys/slsi.h>\fR provides definitions for the interface.
\fIOpenSS7\fR drivers planned or released at this interface include:
.RS
.TP 12
.BR sls (8)
SLS multiplexor for use with SLI compliant streams.
.TP
.BR vsls (8)
SLS module for emulating a virtual SLS.
.TP
.BR m3tp (8)
SLS driver for the MTP Level 3 Tunelling Protocol (M3TP).
.RE
.TP
.BR mtpi (7)
The \fIMessage Transfer Part Interface (MTPI)\fR implements complete SS7 Level
3 [Q704].  MTPI allows real and virtual signalling points and signalling
transfer points to be implemented for use under the
.BR sccp (8)
and
.BR tcap (8)
modules.  It provides access to all SS7 Level 3 state machines
and functions of SS7 Message Transfer Part [Q704].  Header file
\fI<sys/mtpi.h>\fR provides definitions for the interface.  \fIOpenSS7\fR
drivers planned or released at this interface include:
.RS
.TP 12
.BR mtp (8)
MTP multiplexor for use with SLSI compliant streams.
.TP
.BR m3pa (8)
MTP module for the MTP Level 3 Peer Adaptation (M3PA).
.TP
.BR m3ua (8)
MTP module for the MTP Level 3 User Adaptation (M3UA).
.RE
.TP
.BR sccpi (7)
The \fISignalling Connection Control Part Interface (SCCPI)\fR implements
complete SS7 Level 4 [Q711].  SCCPI allows real and virtual subsystems and
global title translations to be implemented for use under the
.BR tcap (8)
module.  It provides access to all SS7 Level 4 state machines of the SS7
Signalling Connnection Control Part [Q711].  Header file \fI<sys/sccpi.h>\fR
provides definitions for the interface.  \fIOpenSS7\fR drivers planned or
released at this interface include:
.RS
.TP 12
.BR sccp (8)
SCCP module for use with MTPI compliant streams.
.TP
.BR sua (8)
SCCP module for the SCCP User Adaptation (SUA).
.RE
.TP
.BR isupi (7)
The \fIIntegrated Services Digital Network (ISDN) User Part Interface (ISUPI)\fR
implements partial SS7 ISUP [Q767].  ISUPI allows call processing agents to
attach to specific PC-PC-CIC ranges in control of trunk groups.  It provides
some basis low-level ISUP state machines (e.g. Unequipped CIC) of the SS7
ISUP [Q767].  Header file \fI<sys/isupi.h>\fR provides definitions for the
interface.  \fIOpenSS7\fR drivers planned or released at this interface
include:
.RS
.TP 12
.BR isup (8)
ISUP module for use with MTPI compliant streams.
.TP
.BR iua (8)
ISUP module for the ISDN User Adaptation (IUA).
.RE
.TP
.BR tcapi (7)
The \fITransaction Capabilities Application Part Interface (TCAPI)\fR
implements partion SS7 TCAP [Q7??].  TCAPI allows transaction processing
agents to attach to specific subsystem instances in control of database
queries.  It provides the TC state machines of the SS7 TCAP [Q???].  Header
file \fI<sys/tcapi.h>\fR provides definitions for the interface.
\fIOpenSS7\fR drivers planned or released at this interface include:
.RS
.TP 12
.BR tcap (8)
TCAP module for use with SCCPI compliant streams.
.RE
.\" .SH "CONFIGURATION"
.\" .SH "ERROR HANDLING"
.SH "SEE ALSO"
.BR isupi (7),
.BR mtpi (7),
.BR sccpi (7),
.BR sdli (7),
.BR sdti (7),
.BR sli (7),
.BR slsi (7),
.BR tcapi (7),
.BR acb56l (8),
.BR acb56t (8),
.BR isup (8),
.BR iua (8),
.BR m2pa (8),
.BR m2tp (8),
.BR m2ua (8),
.BR m3pa (8),
.BR m3tp (8),
.BR m3ua (8),
.BR mtp (8),
.BR sccp (8),
.BR sdl_eth (8),
.BR sdl_ip (8),
.BR sdl_rtp (8),
.BR sdl_sctp (8),
.BR sdl_tcp (8),
.BR sdl_udp (8),
.BR sdt (8),
.BR sl (8),
.BR sls (8),
.BR soip (8),
.BR ss7d (8),
.BR sua (8),
.BR tcap (8),
.BR vsdt (8),
.BR vsl (8),
.BR vsls (8)
.SH "BUGS"
Too many to mention.
.SH "AUTHOR"
.PP
Brian F. G. Bidulock,
.IR "" < [e-mail] >.
.SH "HISTORY"
This STREAMS interface for SS7 is an orignal part of the \fIOpenSS7\fR
package.
.SH "REFERENCES"
.IP "[Q702]" 7
ITU-T Recommendation Q.702 Signalling Data Link
.IP "[Q703]"
ITU-T Recommendation Q.703 Signalling Link
.IP "[Q704]"
ITU-T Recommendation Q.704 Message Transfer Part
.IP "[Q711]"
ITU-T Recommendation Q.711 Signalling Connection Control Part
.IP "[Q767]"
ITU-T Recommendation Q.767 Integrated Services Digital Network (ISDN) User Part
.IP "[Q77?]"
ITU-T Recommendation Q.77? Transaction Capabilities Application Part

.SH COPYRIGHT NOTICE

.sp
Copyright \(co 1997-2001  Brian Bidulock.  All Rights Reserved.

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.