hazi.c

keil c 编写

#include <REGX51.H>
#include <INIT.H>

/************汉字点阵*************/
uchar code	hanzi[4][32] = 					//一个汉字分两行，所以数组二维数为字数的两倍
{
{0x00,0x02,0x00,0x0C,0xFF,0xF0,0xA0,0x01,0xAF,0x91,0xAA,0xE2,0xBA,0xBA,0xAA,0xA4,
0xAA,0xA4,0xAA,0xAA,0xAA,0xB2,0xAF,0xA3,0xA0,0x02,0x80,0x02,0x00,0x00,0x00,0x00},              //"厦",0

{0x00,0x00,0x00,0x00,0x1F,0xFF,0x80,0x00,0x60,0x00,0x00,0x00,0x40,0x00,0x40,0x00,
0x40,0x00,0x40,0x00,0x40,0x00,0x40,0x02,0x40,0x01,0x7F,0xFE,0x00,0x00,0x00,0x00},              //"门",1

{0x04,0x00,0x04,0x01,0x04,0x02,0x04,0x04,0x04,0x08,0x04,0x30,0x05,0xC0,0xFE,0x00,
0x05,0x80,0x04,0x60,0x04,0x10,0x04,0x0C,0x04,0x06,0x04,0x03,0x04,0x02,0x00,0x00},              //"大",2

{0x02,0x00,0x0C,0x40,0x08,0x40,0x48,0x40,0x3A,0x40,0x2A,0x40,0x0A,0x42,0x8A,0x41,
0x7A,0xFE,0x2B,0x40,0x0A,0x40,0x18,0x40,0xEA,0x40,0x4C,0x40,0x08,0x40,0x00,0x00}              //"学",3

};







/************位定义**************/
sbit STTP = P2^7;

/************变量声明***********/
uint n,i,j;			//delay()延时函数计数变量
uint x,y,z;			//out_hanzi()

/************函数声明***********/
void	delay(uint n);			//延时函数
void	out_rxd(uchar *d);				//汉字输出




/************主函数**************/

void main()
{
	SCON = 0x00;
	while(1)
	{	
		P1 = 0;
		for( x = 0; x < 32; x+=2)
 	  	{	
			STTP = 0;
			out_rxd(&hanzi[3][x+1]);
			out_rxd(&hanzi[3][x]);
			out_rxd(&hanzi[2][x+1]);
			out_rxd(&hanzi[2][x]);
			out_rxd(&hanzi[1][x+1]);
			out_rxd(&hanzi[1][x]);
			out_rxd(&hanzi[0][x+1]);
			out_rxd(&hanzi[0][x]);
			STTP = 1;
			P1 = x/2;
		}
	}
}

/************子函数定义