📄 glb.h
字号:
/* * * BRIEF MODULE DESCRIPTION * PNX8550 global definitions * * Author: source@mvista.com * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */#ifndef __PNX8550_GLB_H#define __PNX8550_GLB_H#define PNX8550_GLB1_BASE 0xBBE63000#define PNX8550_GLB2_BASE 0xBBE4d000#define PNX8550_RESET_BASE 0xBBE60000/* PCI Inta Output Enable Registers */#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)/* Bit 1:Enable DAC Powerdown 0:DACs are enabled and are working normally 1:DACs are powerdown*/#define PNX8550_GLB_DAC_PD 0x2/* Bit 0:Enable of PCI inta output 0 = Disable PCI inta output 1 = Enable PCI inta output*/#define PNX8550_GLB_ENABLE_INTA_O 0x1/* PCI Direct Mappings */#define PNX8550_PCIMEM 0x12000000#define PNX8550_PCIMEM_SIZE 0x08000000#define PNX8550_PCIIO 0x1c000000#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */#define PNX8550_PORT_BASE KSEG1// GPIO def#define PNX8550_GPIO_BASE 0x1Be00000#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500)#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004)#define PNX8550_GPIO_MC_31_BIT 30#define PNX8550_GPIO_MC_30_BIT 28#define PNX8550_GPIO_MC_29_BIT 26#define PNX8550_GPIO_MC_28_BIT 24#define PNX8550_GPIO_MC_27_BIT 22#define PNX8550_GPIO_MC_26_BIT 20#define PNX8550_GPIO_MC_25_BIT 18#define PNX8550_GPIO_MC_24_BIT 16#define PNX8550_GPIO_MC_23_BIT 14#define PNX8550_GPIO_MC_22_BIT 12#define PNX8550_GPIO_MC_21_BIT 10#define PNX8550_GPIO_MC_20_BIT 8#define PNX8550_GPIO_MC_19_BIT 6#define PNX8550_GPIO_MC_18_BIT 4#define PNX8550_GPIO_MC_17_BIT 2#define PNX8550_GPIO_MC_16_BIT 0#define PNX8550_GPIO_MODE_PRIMOP 0x1#define PNX8550_GPIO_MODE_NO_OPENDR 0x2#define PNX8550_GPIO_MODE_OPENDR 0x3// RESET module#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)#define PNX8550_RST_REL_MIPS_RST_N 0x8#define PNX8550_RST_DO_SW_RST 0x4#define PNX8550_RST_REL_SYS_RST_OUT 0x2#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -