📄 skaddr.h
字号:
/****************************************************************************** * * Name: skaddr.h * Project: Gigabit Ethernet Adapters, ADDR-Modul * Version: $Revision: 1.29 $ * Date: $Date: 2003/05/13 16:57:24 $ * Purpose: Header file for Address Management (MC, UC, Prom). * ******************************************************************************//****************************************************************************** * * (C)Copyright 1998-2002 SysKonnect GmbH. * (C)Copyright 2002-2003 Marvell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * Description: * * This module is intended to manage multicast addresses and promiscuous mode * on GEnesis adapters. * * Include File Hierarchy: * * "skdrv1st.h" * ... * "sktypes.h" * "skqueue.h" * "skaddr.h" * ... * "skdrv2nd.h" * ******************************************************************************/#ifndef __INC_SKADDR_H#define __INC_SKADDR_H#ifdef __cplusplusextern "C" {#endif /* cplusplus *//* defines ********************************************************************/#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */#define SK_MAX_ADDRS 14 /* #Addrs for exact match. *//* ----- Common return values ----- */#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */#define SK_ADDR_TOO_EARLY 101 /* Function called too early. *//* ----- Clear/Add flag bits ----- */#define SK_ADDR_PERMANENT 1 /* RLMT Address *//* ----- Additional Clear flag bits ----- */#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. *//* ----- Override flag bits ----- */#define SK_ADDR_LOGICAL_ADDRESS 0#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */#define SK_ADDR_PHYSICAL_ADDRESS 1#define SK_ADDR_CLEAR_LOGICAL 2#define SK_ADDR_SET_LOGICAL 4/* ----- Override return values ----- */#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS)#define SK_ADDR_DUPLICATE_ADDRESS 1#define SK_ADDR_MULTICAST_ADDRESS 2/* ----- Partitioning of excact match table ----- */#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */#define SK_ADDR_FIRST_MATCH_RLMT 1#define SK_ADDR_LAST_MATCH_RLMT 2#define SK_ADDR_FIRST_MATCH_DRV 3#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1)/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. *//* ----- Additional SkAddrMcAdd return values ----- */#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. *//* Promiscuous mode bits ----- */#define SK_PROM_MODE_NONE 0 /* Normal receive. */#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. *//* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. *//* Macros */#ifdef OLD_STUFF#ifndef SK_ADDR_EQUAL/* * "&" instead of "&&" allows better optimization on IA-64. * The replacement is safe here, as all bytes exist. */#ifndef SK_ADDR_DWORD_COMPARE#define SK_ADDR_EQUAL(A1,A2) ( \ (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))#else /* SK_ADDR_DWORD_COMPARE */#define SK_ADDR_EQUAL(A1,A2) ( \ (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \ (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))#endif /* SK_ADDR_DWORD_COMPARE */#endif /* SK_ADDR_EQUAL */#endif /* 0 */#ifndef SK_ADDR_EQUAL#ifndef SK_ADDR_DWORD_COMPARE#define SK_ADDR_EQUAL(A1,A2) ( \ (((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \ (((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \ (((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \ (((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \ (((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \ (((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))#else /* SK_ADDR_DWORD_COMPARE */#define SK_ADDR_EQUAL(A1,A2) ( \ (*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \ *(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \ (*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \ *(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))#endif /* SK_ADDR_DWORD_COMPARE */#endif /* SK_ADDR_EQUAL *//* typedefs *******************************************************************/typedef struct s_MacAddr { SK_U8 a[SK_MAC_ADDR_LEN];} SK_MAC_ADDR;/* SK_FILTER is used to ensure alignment of the filter. */typedef union s_InexactFilter { SK_U8 Bytes[8]; SK_U64 Val; /* Dummy entry for alignment only. */} SK_FILTER64;typedef struct s_AddrNet SK_ADDR_NET;typedef struct s_AddrPort {/* ----- Public part (read-only) ----- */ SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */ SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */ int PromMode; /* Promiscuous Mode. *//* ----- Private part ----- */ SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */ SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ SK_U8 Align01; SK_U32 FirstExactMatchRlmt; SK_U32 NextExactMatchRlmt; SK_U32 FirstExactMatchDrv; SK_U32 NextExactMatchDrv; SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES]; SK_FILTER64 InexactFilter; /* For 64-bit hash register. */ SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */ SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */} SK_ADDR_PORT;struct s_AddrNet {/* ----- Public part (read-only) ----- */ SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */ SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. *//* ----- Private part ----- */ SK_U32 ActivePort; /* View of module ADDR. */ SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ SK_U8 Align01; SK_U16 Align02;};typedef struct s_Addr {/* ----- Public part (read-only) ----- */ SK_ADDR_NET Net[SK_MAX_NETS]; SK_ADDR_PORT Port[SK_MAX_MACS];/* ----- Private part ----- */} SK_ADDR;/* function prototypes ********************************************************/#ifndef SK_KR_PROTO/* Functions provided by SkAddr *//* ANSI/C++ compliant function prototypes */extern int SkAddrInit( SK_AC *pAC, SK_IOC IoC, int Level);extern int SkAddrMcClear( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int Flags);extern int SkAddrXmacMcClear( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int Flags);extern int SkAddrGmacMcClear( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int Flags);extern int SkAddrMcAdd( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, SK_MAC_ADDR *pMc, int Flags);extern int SkAddrXmacMcAdd( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, SK_MAC_ADDR *pMc, int Flags);extern int SkAddrGmacMcAdd( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, SK_MAC_ADDR *pMc, int Flags);extern int SkAddrMcUpdate( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);extern int SkAddrXmacMcUpdate( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);extern int SkAddrGmacMcUpdate( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);extern int SkAddrOverride( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, SK_MAC_ADDR SK_FAR *pNewAddr, int Flags);extern int SkAddrPromiscuousChange( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int NewPromMode);extern int SkAddrXmacPromiscuousChange( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int NewPromMode);extern int SkAddrGmacPromiscuousChange( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, int NewPromMode); #ifndef SK_SLIMextern int SkAddrSwap( SK_AC *pAC, SK_IOC IoC, SK_U32 FromPortNumber, SK_U32 ToPortNumber);#endif#else /* defined(SK_KR_PROTO)) *//* Non-ANSI/C++ compliant function prototypes */#error KR-style prototypes are not yet provided.#endif /* defined(SK_KR_PROTO)) */#ifdef __cplusplus}#endif /* __cplusplus */#endif /* __INC_SKADDR_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -