📄 rscalc.c
字号:
/******************************************************************************* * * Module Name: rscalc - Calculate stream and list lengths * ******************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#include <acpi/acpi.h>#include <acpi/acresrc.h>#include <acpi/amlcode.h>#include <acpi/acnamesp.h>#define _COMPONENT ACPI_RESOURCESACPI_MODULE_NAME("rscalc")/******************************************************************************* * * FUNCTION: acpi_rs_get_byte_stream_length * * PARAMETERS: linked_list - Pointer to the resource linked list * size_needed - u32 pointer of the size buffer needed * to properly return the parsed data * * RETURN: Status * * DESCRIPTION: Takes the resource byte stream and parses it once, calculating * the size buffer needed to hold the linked list that conveys * the resource data. * ******************************************************************************/acpi_statusacpi_rs_get_byte_stream_length(struct acpi_resource *linked_list, acpi_size * size_needed){ acpi_size byte_stream_size_needed = 0; acpi_size segment_size; u8 done = FALSE; ACPI_FUNCTION_TRACE("rs_get_byte_stream_length"); while (!done) { /* Init the variable that will hold the size to add to the total. */ segment_size = 0; switch (linked_list->id) { case ACPI_RSTYPE_IRQ: /* * IRQ Resource * For an IRQ Resource, Byte 3, although optional, will always be * created - it holds IRQ information. */ segment_size = 4; break; case ACPI_RSTYPE_DMA: /* * DMA Resource * For this resource the size is static */ segment_size = 3; break; case ACPI_RSTYPE_START_DPF: /* * Start Dependent Functions Resource * For a start_dependent_functions Resource, Byte 1, although * optional, will always be created. */ segment_size = 2; break; case ACPI_RSTYPE_END_DPF: /* * End Dependent Functions Resource * For this resource the size is static */ segment_size = 1; break; case ACPI_RSTYPE_IO: /* * IO Port Resource * For this resource the size is static */ segment_size = 8; break; case ACPI_RSTYPE_FIXED_IO: /* * Fixed IO Port Resource * For this resource the size is static */ segment_size = 4; break; case ACPI_RSTYPE_VENDOR: /* * Vendor Defined Resource * For a Vendor Specific resource, if the Length is between 1 and 7 * it will be created as a Small Resource data type, otherwise it * is a Large Resource data type. */ if (linked_list->data.vendor_specific.length > 7) { segment_size = 3; } else { segment_size = 1; } segment_size += linked_list->data.vendor_specific.length; break; case ACPI_RSTYPE_END_TAG: /* * End Tag * For this resource the size is static */ segment_size = 2; done = TRUE; break; case ACPI_RSTYPE_MEM24: /* * 24-Bit Memory Resource * For this resource the size is static */ segment_size = 12; break; case ACPI_RSTYPE_MEM32: /* * 32-Bit Memory Range Resource * For this resource the size is static */ segment_size = 20; break; case ACPI_RSTYPE_FIXED_MEM32: /* * 32-Bit Fixed Memory Resource * For this resource the size is static */ segment_size = 12; break; case ACPI_RSTYPE_ADDRESS16: /* * 16-Bit Address Resource * The base size of this byte stream is 16. If a Resource Source * string is not NULL, add 1 for the Index + the length of the null * terminated string Resource Source + 1 for the null. */ segment_size = 16; if (linked_list->data.address16.resource_source. string_ptr) { segment_size += linked_list->data.address16.resource_source. string_length; segment_size++; } break; case ACPI_RSTYPE_ADDRESS32: /* * 32-Bit Address Resource * The base size of this byte stream is 26. If a Resource * Source string is not NULL, add 1 for the Index + the * length of the null terminated string Resource Source + * 1 for the null. */ segment_size = 26; if (linked_list->data.address32.resource_source. string_ptr) { segment_size += linked_list->data.address32.resource_source. string_length; segment_size++; } break; case ACPI_RSTYPE_ADDRESS64: /* * 64-Bit Address Resource * The base size of this byte stream is 46. If a resource_source * string is not NULL, add 1 for the Index + the length of the null * terminated string Resource Source + 1 for the null. */ segment_size = 46; if (linked_list->data.address64.resource_source. string_ptr) { segment_size += linked_list->data.address64.resource_source. string_length; segment_size++; } break; case ACPI_RSTYPE_EXT_IRQ: /* * Extended IRQ Resource * The base size of this byte stream is 9. This is for an Interrupt * table length of 1. For each additional interrupt, add 4. * If a Resource Source string is not NULL, add 1 for the * Index + the length of the null terminated string * Resource Source + 1 for the null. */ segment_size = 9 + (((acpi_size) linked_list->data.extended_irq. number_of_interrupts - 1) * 4); if (linked_list->data.extended_irq.resource_source. string_ptr) { segment_size += linked_list->data.extended_irq. resource_source.string_length; segment_size++; } break; default: /* If we get here, everything is out of sync, exit with error */ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE); } /* switch (linked_list->Id) */ /* Update the total */ byte_stream_size_needed += segment_size; /* Point to the next object */ linked_list = ACPI_PTR_ADD(struct acpi_resource, linked_list, linked_list->length); } /* This is the data the caller needs */ *size_needed = byte_stream_size_needed; return_ACPI_STATUS(AE_OK);}/******************************************************************************* * * FUNCTION: acpi_rs_get_list_length * * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream * byte_stream_buffer_length - Size of byte_stream_buffer * size_needed - u32 pointer of the size buffer * needed to properly return the * parsed data * * RETURN: Status * * DESCRIPTION: Takes the resource byte stream and parses it once, calculating * the size buffer needed to hold the linked list that conveys * the resource data. * ******************************************************************************/acpi_statusacpi_rs_get_list_length(u8 * byte_stream_buffer, u32 byte_stream_buffer_length, acpi_size * size_needed){ u32 buffer_size = 0; u32 bytes_parsed = 0; u8 number_of_interrupts = 0; u8 number_of_channels = 0; u8 resource_type; u32 structure_size; u32 bytes_consumed; u8 *buffer; u8 temp8; u16 temp16; u8 index; u8 additional_bytes; ACPI_FUNCTION_TRACE("rs_get_list_length"); while (bytes_parsed < byte_stream_buffer_length) { /* The next byte in the stream is the resource type */ resource_type = acpi_rs_get_resource_type(*byte_stream_buffer); switch (resource_type) { case ACPI_RDESC_TYPE_MEMORY_24: /* * 24-Bit Memory Resource */ bytes_consumed = 12; structure_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24); break; case ACPI_RDESC_TYPE_LARGE_VENDOR: /* * Vendor Defined Resource */ buffer = byte_stream_buffer; ++buffer; ACPI_MOVE_16_TO_16(&temp16, buffer); bytes_consumed = temp16 + 3; /* Ensure a 32-bit boundary for the structure */ temp16 = (u16) ACPI_ROUND_UP_to_32_bITS(temp16); structure_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_vendor) + (temp16 * sizeof(u8)); break; case ACPI_RDESC_TYPE_MEMORY_32: /* * 32-Bit Memory Range Resource */ bytes_consumed = 20; structure_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32); break; case ACPI_RDESC_TYPE_FIXED_MEMORY_32: /* * 32-Bit Fixed Memory Resource */ bytes_consumed = 12; structure_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32); break; case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE: /* * 64-Bit Address Resource */ buffer = byte_stream_buffer; ++buffer; ACPI_MOVE_16_TO_16(&temp16, buffer); bytes_consumed = temp16 + 3; structure_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_address64); break; case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE: /* * 64-Bit Address Resource */ buffer = byte_stream_buffer; ++buffer; ACPI_MOVE_16_TO_16(&temp16, buffer); bytes_consumed = temp16 + 3; /* * Resource Source Index and Resource Source are optional elements. * Check the length of the Bytestream. If it is greater than 43, * that means that an Index exists and is followed by a null * terminated string. Therefore, set the temp variable to the * length minus the minimum byte stream length plus the byte for * the Index to determine the size of the NULL terminated string. */ if (43 < temp16) {
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -