⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 evxfevnt.c

📁 linux-2.6.15.6
💻 C
📖 第 1 页 / 共 2 页
字号:
/****************************************************************************** * * Module Name: evxfevnt - External Interfaces, ACPI event disable/enable * *****************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions, and the following disclaimer, *    without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer *    substantially similar to the "NO WARRANTY" disclaimer below *    ("Disclaimer") and any redistribution must be conditioned upon *    including a substantially similar Disclaimer requirement for further *    binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names *    of any contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#include <linux/module.h>#include <acpi/acpi.h>#include <acpi/acevents.h>#include <acpi/acnamesp.h>#define _COMPONENT          ACPI_EVENTSACPI_MODULE_NAME("evxfevnt")/******************************************************************************* * * FUNCTION:    acpi_enable * * PARAMETERS:  None * * RETURN:      Status * * DESCRIPTION: Transfers the system into ACPI mode. * ******************************************************************************/acpi_status acpi_enable(void){	acpi_status status = AE_OK;	ACPI_FUNCTION_TRACE("acpi_enable");	/* Make sure we have the FADT */	if (!acpi_gbl_FADT) {		ACPI_DEBUG_PRINT((ACPI_DB_WARN,				  "No FADT information present!\n"));		return_ACPI_STATUS(AE_NO_ACPI_TABLES);	}	if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {		ACPI_DEBUG_PRINT((ACPI_DB_INIT,				  "System is already in ACPI mode\n"));	} else {		/* Transition to ACPI mode */		status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);		if (ACPI_FAILURE(status)) {			ACPI_REPORT_ERROR(("Could not transition to ACPI mode.\n"));			return_ACPI_STATUS(status);		}		ACPI_DEBUG_PRINT((ACPI_DB_INIT,				  "Transition to ACPI mode successful\n"));	}	return_ACPI_STATUS(status);}/******************************************************************************* * * FUNCTION:    acpi_disable * * PARAMETERS:  None * * RETURN:      Status * * DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode. * ******************************************************************************/acpi_status acpi_disable(void){	acpi_status status = AE_OK;	ACPI_FUNCTION_TRACE("acpi_disable");	if (!acpi_gbl_FADT) {		ACPI_DEBUG_PRINT((ACPI_DB_WARN,				  "No FADT information present!\n"));		return_ACPI_STATUS(AE_NO_ACPI_TABLES);	}	if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {		ACPI_DEBUG_PRINT((ACPI_DB_INIT,				  "System is already in legacy (non-ACPI) mode\n"));	} else {		/* Transition to LEGACY mode */		status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);		if (ACPI_FAILURE(status)) {			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,					  "Could not exit ACPI mode to legacy mode"));			return_ACPI_STATUS(status);		}		ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n"));	}	return_ACPI_STATUS(status);}/******************************************************************************* * * FUNCTION:    acpi_enable_event * * PARAMETERS:  Event           - The fixed eventto be enabled *              Flags           - Reserved * * RETURN:      Status * * DESCRIPTION: Enable an ACPI event (fixed) * ******************************************************************************/acpi_status acpi_enable_event(u32 event, u32 flags){	acpi_status status = AE_OK;	u32 value;	ACPI_FUNCTION_TRACE("acpi_enable_event");	/* Decode the Fixed Event */	if (event > ACPI_EVENT_MAX) {		return_ACPI_STATUS(AE_BAD_PARAMETER);	}	/*	 * Enable the requested fixed event (by writing a one to the	 * enable register bit)	 */	status =	    acpi_set_register(acpi_gbl_fixed_event_info[event].			      enable_register_id, 1, ACPI_MTX_LOCK);	if (ACPI_FAILURE(status)) {		return_ACPI_STATUS(status);	}	/* Make sure that the hardware responded */	status =	    acpi_get_register(acpi_gbl_fixed_event_info[event].			      enable_register_id, &value, ACPI_MTX_LOCK);	if (ACPI_FAILURE(status)) {		return_ACPI_STATUS(status);	}	if (value != 1) {		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,				  "Could not enable %s event\n",				  acpi_ut_get_event_name(event)));		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);	}	return_ACPI_STATUS(status);}EXPORT_SYMBOL(acpi_enable_event);/******************************************************************************* * * FUNCTION:    acpi_set_gpe_type * * PARAMETERS:  gpe_device      - Parent GPE Device *              gpe_number      - GPE level within the GPE block *              Type            - New GPE type * * RETURN:      Status * * DESCRIPTION: Set the type of an individual GPE * ******************************************************************************/acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type){	acpi_status status = AE_OK;	struct acpi_gpe_event_info *gpe_event_info;	ACPI_FUNCTION_TRACE("acpi_set_gpe_type");	/* Ensure that we have a valid GPE number */	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);	if (!gpe_event_info) {		status = AE_BAD_PARAMETER;		goto unlock_and_exit;	}	if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {		return_ACPI_STATUS(AE_OK);	}	/* Set the new type (will disable GPE if currently enabled) */	status = acpi_ev_set_gpe_type(gpe_event_info, type);      unlock_and_exit:	return_ACPI_STATUS(status);}EXPORT_SYMBOL(acpi_set_gpe_type);/******************************************************************************* * * FUNCTION:    acpi_enable_gpe * * PARAMETERS:  gpe_device      - Parent GPE Device *              gpe_number      - GPE level within the GPE block *              Flags           - Just enable, or also wake enable? *                                Called from ISR or not * * RETURN:      Status * * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags){	acpi_status status = AE_OK;	struct acpi_gpe_event_info *gpe_event_info;	ACPI_FUNCTION_TRACE("acpi_enable_gpe");	/* Use semaphore lock if not executing at interrupt level */	if (flags & ACPI_NOT_ISR) {		status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);		if (ACPI_FAILURE(status)) {			return_ACPI_STATUS(status);		}	}	/* Ensure that we have a valid GPE number */	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);	if (!gpe_event_info) {		status = AE_BAD_PARAMETER;		goto unlock_and_exit;	}	/* Perform the enable */	status = acpi_ev_enable_gpe(gpe_event_info, TRUE);      unlock_and_exit:	if (flags & ACPI_NOT_ISR) {		(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);	}	return_ACPI_STATUS(status);}EXPORT_SYMBOL(acpi_enable_gpe);/******************************************************************************* * * FUNCTION:    acpi_disable_gpe * * PARAMETERS:  gpe_device      - Parent GPE Device *              gpe_number      - GPE level within the GPE block *              Flags           - Just disable, or also wake disable? *                                Called from ISR or not * * RETURN:      Status * * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags){	acpi_status status = AE_OK;	struct acpi_gpe_event_info *gpe_event_info;	ACPI_FUNCTION_TRACE("acpi_disable_gpe");	/* Use semaphore lock if not executing at interrupt level */	if (flags & ACPI_NOT_ISR) {		status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);		if (ACPI_FAILURE(status)) {			return_ACPI_STATUS(status);		}	}	/* Ensure that we have a valid GPE number */	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);	if (!gpe_event_info) {		status = AE_BAD_PARAMETER;		goto unlock_and_exit;	}	status = acpi_ev_disable_gpe(gpe_event_info);      unlock_and_exit:	if (flags & ACPI_NOT_ISR) {		(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);	}	return_ACPI_STATUS(status);}/******************************************************************************* * * FUNCTION:    acpi_disable_event * * PARAMETERS:  Event           - The fixed eventto be enabled *              Flags           - Reserved * * RETURN:      Status * * DESCRIPTION: Disable an ACPI event (fixed) * ******************************************************************************/acpi_status acpi_disable_event(u32 event, u32 flags){	acpi_status status = AE_OK;	u32 value;	ACPI_FUNCTION_TRACE("acpi_disable_event");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -