📄 mpi_cnfg.h
字号:
/* * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi_cnfg.h * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * * mpi_cnfg.h Version: 01.05.09 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 * fields to FC_DEVICE_0 page, updated the page version. * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages * and updated the page versions. * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 * page and updated the page version. * Added Information field and _INFO_PARAMS_NEGOTIATED * definitionto SCSI_DEVICE_0 page. * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the * page version. * Added BucketsRemaining to LAN_1 page, redefined the * state values, and updated the page version. * Revised bus width definitions in SCSI_PORT_0, * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page * version. * Moved FC_DEVICE_0 PageAddress description to spec. * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field * widths in IOC_0 page and updated the page version. * 11-02-00 01.01.01 Original release for post 1.0 work * Added Manufacturing pages, IO Unit Page 2, SCSI SPI * Port Page 2, FC Port Page 4, FC Port Page 5 * 11-15-00 01.01.02 Interim changes to match proposals * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. * 12-05-00 01.01.04 Modified config page actions. * 01-09-01 01.01.05 Added defines for page address formats. * Data size for Manufacturing pages 2 and 3 no longer * defined here. * Io Unit Page 2 size is fixed at 4 adapters and some * flags were changed. * SCSI Port Page 2 Device Settings modified. * New fields added to FC Port Page 0 and some flags * cleaned up. * Removed impedance flash from FC Port Page 1. * Added FC Port pages 6 and 7. * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. * Added some LinkType defines for FcPortPage0. * 02-20-01 01.01.08 Started using MPI_POINTER. * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with * MPI_CONFIG_PAGETYPE_RAID_VOLUME. * Added definitions and structures for IOC Page 2 and * RAID Volume Page 2. * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. * Added VendorId and ProductRevLevel fields to * RAIDVOL2_IM_PHYS_ID struct. * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ * defines to make them compatible to MPI version 1.0. * Added structure offset comments. * 04-09-01 01.01.11 Added some new defines for the PageAddress field and * removed some obsolete ones. * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. * 08-08-01 01.02.01 Original release for v1.2 work. * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. * Added defines for the SEP bits in RVP2 VolumeSettings. * Modified the DeviceSettings field in RVP2 to use the * proper structure. * Added defines for SES, SAF-TE, and cross channel for * IOCPage2 CapabilitiesFlags. * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. * Removed define for * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. * Added rejected bits to SCSI Device Page 0 Information. * Increased size of ALPA array in FC Port Page 2 by one * and removed a one byte reserved field. * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. * Added structures for Manufacturing Page 4, IO Unit * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and * RAID PhysDisk Page 0. * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. * Modified some of the new defines to make them 32 * character unique. * Modified how variable length pages (arrays) are defined. * Added generic defines for hot spare pools and RAID * volume types. * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with * related define, and bumped the page version define. * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a * reserved byte and added a define. * Added define for * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. * Added new config page: CONFIG_PAGE_IOC_5. * Added MaxAliases, MaxHardAliases, and NumCurrentAliases * fields to CONFIG_PAGE_FC_PORT_0. * Added AltConnector and NumRequestedAliases fields to * CONFIG_PAGE_FC_PORT_1. * Added new config page: CONFIG_PAGE_FC_PORT_10. * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. * Added additional MPI_SCSIDEVPAGE0_NP_ defines. * Added more MPI_SCSIDEVPAGE1_RP_ defines. * Added define for * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. * Modified MPI_FCPORTPAGE5_FLAGS_ defines. * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for * CONFIG_PAGE_FC_PORT_1. * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable * an alias. * Added more device id defines. * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. * Added TargetConfig and IDConfig fields to * CONFIG_PAGE_SCSI_PORT_1. * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 * to control DV. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field * with ADISCHardALPA. * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout * fields and related defines to CONFIG_PAGE_FC_PORT_1. * Added define for * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. * Added new fields to the substructures of * CONFIG_PAGE_FC_PORT_10. * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, * CONFIG_PAGE_SCSI_DEVICE_0, and * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for * these pages. * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config * pages. * Added a new structure for extended config page header. * Added new extended config pages types and structures for * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 * to add a Flags field. * Two new Manufacturing config pages (5 and 6). * Two new bits defined for IO Unit Page 1 Flags field. * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields * to specify the BIOS boot device. * Four new Flags bits defined for IO Unit Page 2. * Added IO Unit Page 4. * Added EEDP Flags settings to IOC Page 1. * Added new BIOS Page 1 config page. * 10-05-04 01.05.02 Added define for * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and * associated defines. * Added more defines for SAS IO Unit Page 0 * DiscoveryStatus field. * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. * Added defines for Physical Mapping Modes to SAS IO Unit * Page 2. * Added define for * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. * Added defines for MaxTargetSpinUp to BIOS Page 1. * Added 5 new ControlFlags defines for SAS IO Unit * Page 1. * Added MaxNumPhysicalMappedIDs field to SAS IO Unit * Page 2. * Added AccessStatus field to SAS Device Page 0 and added * new Flags bits for supported SATA features. * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID * Volume Page 1, and RAID Physical Disk Page 1. * Replaced IO Unit Page 1 BootTargetID,BootBus, and * BootAdapterNum with reserved field. * Added DataScrubRate and ResyncRate to RAID Volume * Page 0. * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT * define. * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 * Flags field. * Added Auto Port Config flag define for SAS IOUNIT * Page 1 ControlFlags. * Added Disabled bad Phy define to Expander Page 1 * Discovery Info field. * Added SAS/SATA device support to SAS IOUnit Page 1 * ControlFlags. * Added Unsupported device to SAS Dev Page 0 Flags field * Added disable use SATA Hash Address for SAS IOUNIT * page 1 in ControlFields. * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to * Manufacturing Page 4. * Added new defines for BIOS Page 1 IOCSettings field. * Added ExtDiskIdentifier field to RAID Physical Disk * Page 0. * Added new defines for SAS IO Unit Page 1 ControlFlags * and to SAS Device Page 0 Flags to control SATA devices. * Added defines and structures for the new Log Page 0, a * new type of configuration page. * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. * Added WWID field to RAID Volume Page 1. * Added PhysicalPort field to SAS Expander pages 0 and 1. * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. * Added Enclosure/Slot boot device format to BIOS Page 2. * New status value for RAID Volume Page 0 VolumeStatus * (VolumeState subfield). * New value for RAID Physical Page 0 InactiveStatus. * Added Inactive Volume Member flag RAID Physical Disk * Page 0 PhysDiskStatus field. * New physical mapping mode in SAS IO Unit Page 2. * Added CONFIG_PAGE_SAS_ENCLOSURE_0. * Added Slot and Enclosure fields to SAS Device Page 0. * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. * Added more RAID type defines to IOC Page 2. * Added Port Enable Delay settings to BIOS Page 1. * Added Bad Block Table Full define to RAID Volume Page 0. * Added Previous State defines to RAID Physical Disk * Page 0. * Added Max Sata Targets define for DiscoveryStatus field * of SAS IO Unit Page 0. * Added Device Self Test to Control Flags of SAS IO Unit * Page 1. * Added Direct Attach Starting Slot Number define for SAS * IO Unit Page 2. * Added new fields in SAS Device Page 2 for enclosure * mapping. * Added OwnerDevHandle and Flags field to SAS PHY Page 0. * Added IOC GPIO Flags define to SAS Enclosure Page 0. * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. * -------------------------------------------------------------------------- */#ifndef MPI_CNFG_H#define MPI_CNFG_H⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -