⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 sisusb.h

📁 linux-2.6.15.6
💻 H
字号:
/* * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles * * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria * * If distributed as part of the Linux kernel, this code is licensed under the * terms of the GPL v2. * * Otherwise, the following license terms apply: * * * Redistribution and use in source and binary forms, with or without * * modification, are permitted provided that the following conditions * * are met: * * 1) Redistributions of source code must retain the above copyright * *    notice, this list of conditions and the following disclaimer. * * 2) Redistributions in binary form must reproduce the above copyright * *    notice, this list of conditions and the following disclaimer in the * *    documentation and/or other materials provided with the distribution. * * 3) The name of the author may not be used to endorse or promote products * *    derived from this software without specific prior written permission. * * * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Author: 	Thomas Winischhofer <thomas@winischhofer.net> * */#ifndef _SISUSB_H_#define _SISUSB_H_#include <linux/version.h>#ifdef CONFIG_COMPAT#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,10)#include <linux/ioctl32.h>#define SISUSB_OLD_CONFIG_COMPAT#else#define SISUSB_NEW_CONFIG_COMPAT#endif#endif/* For older kernels, support for text consoles is by default * off. To ensable text console support, change the following: */#if 0#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)#define CONFIG_USB_SISUSBVGA_CON#endif#endif/* Version Information */#define SISUSB_VERSION		0#define SISUSB_REVISION 	0#define SISUSB_PATCHLEVEL	8/* Include console and mode switching code? */#ifdef CONFIG_USB_SISUSBVGA_CON#define INCL_SISUSB_CON		1#endif#ifdef INCL_SISUSB_CON#include <linux/console.h>#include <linux/vt_kern.h>#include "sisusb_struct.h"#endif/* USB related */#define SISUSB_MINOR		133	/* official *//* Size of the sisusb input/output buffers */#define SISUSB_IBUF_SIZE  0x01000#define SISUSB_OBUF_SIZE  0x10000	/* fixed */#define NUMOBUFS 8			/* max number of output buffers/output URBs *//* About endianness: * * 1) I/O ports, PCI config registers. The read/write() *    calls emulate inX/outX. Hence, the data is *    expected/delivered in machine endiannes by this *    driver. * 2) Video memory. The data is copied 1:1. There is *    no swapping. Ever. This means for userland that *    the data has to be prepared properly. (Hint: *    think graphics data format, command queue, *    hardware cursor.) * 3) MMIO. Data is copied 1:1. MMIO must be swapped *    properly by userland. * */#ifdef __BIG_ENDIAN#define SISUSB_CORRECT_ENDIANNESS_PACKET(p) 		\	do {						\		p->header  = cpu_to_le16(p->header);	\		p->address = cpu_to_le32(p->address);	\		p->data    = cpu_to_le32(p->data);	\	} while(0)#else#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)#endifstruct sisusb_usb_data;struct sisusb_urb_context {		/* urb->context for outbound bulk URBs */	struct sisusb_usb_data *sisusb;	int urbindex;	int *actual_length;};struct sisusb_usb_data {	struct usb_device *sisusb_dev;	struct usb_interface *interface;	struct kref kref;	wait_queue_head_t wait_q;	/* for syncind and timeouts */	struct semaphore lock;		/* general race avoidance */	unsigned int ifnum;		/* interface number of the USB device */	int minor;			/* minor (for logging clarity) */	int isopen;			/* !=0 if open */	int present;			/* !=0 if device is present on the bus */	int ready;			/* !=0 if device is ready for userland */#ifdef SISUSB_OLD_CONFIG_COMPAT	int ioctl32registered;#endif	int numobufs;			/* number of obufs = number of out urbs */	char *obuf[NUMOBUFS], *ibuf;	/* transfer buffers */	int obufsize, ibufsize;	dma_addr_t transfer_dma_out[NUMOBUFS];	dma_addr_t transfer_dma_in;	struct urb *sisurbout[NUMOBUFS];	struct urb *sisurbin;	unsigned char urbstatus[NUMOBUFS];	unsigned char completein;	struct sisusb_urb_context urbout_context[NUMOBUFS];	unsigned long flagb0;	unsigned long vrambase;		/* framebuffer base */	unsigned int vramsize;		/* framebuffer size (bytes) */	unsigned long mmiobase;	unsigned int mmiosize;	unsigned long ioportbase;	unsigned char devinit;		/* device initialized? */	unsigned char gfxinit;		/* graphics core initialized? */	unsigned short chipid, chipvendor;	unsigned short chiprevision;#ifdef INCL_SISUSB_CON	struct SiS_Private *SiS_Pr;	unsigned long scrbuf;	unsigned int scrbuf_size;	int haveconsole, con_first, con_last;	int havethisconsole[MAX_NR_CONSOLES];	int textmodedestroyed;	unsigned int sisusb_num_columns; /* real number, not vt's idea */	int cur_start_addr, con_rolled_over;	int sisusb_cursor_loc, bad_cursor_pos;	int sisusb_cursor_size_from;	int sisusb_cursor_size_to;	int current_font_height, current_font_512;	int font_backup_size, font_backup_height, font_backup_512;	char *font_backup;	int font_slot;	struct vc_data *sisusb_display_fg;	int is_gfx;	int con_blanked;#endif};#define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref)/* USB transport related *//* urbstatus */#define SU_URB_BUSY   1#define SU_URB_ALLOC  2/* Endpoints */#define SISUSB_EP_GFX_IN	0x0e	/* gfx std packet out(0e)/in(8e) */#define SISUSB_EP_GFX_OUT	0x0e#define SISUSB_EP_GFX_BULK_OUT	0x01	/* gfx mem bulk out/in */#define SISUSB_EP_GFX_BULK_IN	0x02	/* ? 2 is "OUT" ? */#define SISUSB_EP_GFX_LBULK_OUT	0x03	/* gfx large mem bulk out */#define SISUSB_EP_UNKNOWN_04	0x04	/* ? 4 is "OUT" ? - unused */#define SISUSB_EP_BRIDGE_IN	0x0d	/* Net2280 out(0d)/in(8d) */#define SISUSB_EP_BRIDGE_OUT	0x0d#define SISUSB_TYPE_MEM		0#define SISUSB_TYPE_IO		1struct sisusb_packet {	unsigned short header;	u32 address;	u32 data;} __attribute__((__packed__));#define CLEARPACKET(packet) memset(packet, 0, 10)/* PCI bridge related */#define SISUSB_PCI_MEMBASE	0xd0000000#define SISUSB_PCI_MMIOBASE	0xe4000000#define SISUSB_PCI_IOPORTBASE	0x0000d000#define SISUSB_PCI_PSEUDO_MEMBASE	0x10000000#define SISUSB_PCI_PSEUDO_MMIOBASE	0x20000000#define SISUSB_PCI_PSEUDO_IOPORTBASE	0x0000d000#define SISUSB_PCI_PSEUDO_PCIBASE	0x00010000#define SISUSB_PCI_MMIOSIZE	(128*1024)#define SISUSB_PCI_PCONFSIZE	0x5c/* graphics core related */#define AROFFSET	0x40#define ARROFFSET	0x41#define GROFFSET	0x4e#define SROFFSET	0x44#define CROFFSET	0x54#define MISCROFFSET	0x4c#define MISCWOFFSET	0x42#define INPUTSTATOFFSET 0x5A#define PART1OFFSET	0x04#define PART2OFFSET	0x10#define PART3OFFSET	0x12#define PART4OFFSET	0x14#define PART5OFFSET	0x16#define CAPTUREOFFSET	0x00#define VIDEOOFFSET	0x02#define COLREGOFFSET	0x48#define PELMASKOFFSET	0x46#define VGAENABLE	0x43#define SISAR		SISUSB_PCI_IOPORTBASE + AROFFSET#define SISARR		SISUSB_PCI_IOPORTBASE + ARROFFSET#define SISGR		SISUSB_PCI_IOPORTBASE + GROFFSET#define SISSR		SISUSB_PCI_IOPORTBASE + SROFFSET#define SISCR		SISUSB_PCI_IOPORTBASE + CROFFSET#define SISMISCR	SISUSB_PCI_IOPORTBASE + MISCROFFSET#define SISMISCW	SISUSB_PCI_IOPORTBASE + MISCWOFFSET#define SISINPSTAT	SISUSB_PCI_IOPORTBASE + INPUTSTATOFFSET#define SISPART1	SISUSB_PCI_IOPORTBASE + PART1OFFSET#define SISPART2	SISUSB_PCI_IOPORTBASE + PART2OFFSET#define SISPART3	SISUSB_PCI_IOPORTBASE + PART3OFFSET#define SISPART4	SISUSB_PCI_IOPORTBASE + PART4OFFSET#define SISPART5	SISUSB_PCI_IOPORTBASE + PART5OFFSET#define SISCAP		SISUSB_PCI_IOPORTBASE + CAPTUREOFFSET#define SISVID		SISUSB_PCI_IOPORTBASE + VIDEOOFFSET#define SISCOLIDXR	SISUSB_PCI_IOPORTBASE + COLREGOFFSET - 1#define SISCOLIDX	SISUSB_PCI_IOPORTBASE + COLREGOFFSET#define SISCOLDATA	SISUSB_PCI_IOPORTBASE + COLREGOFFSET + 1#define SISCOL2IDX	SISPART5#define SISCOL2DATA	SISPART5 + 1#define SISPEL		SISUSB_PCI_IOPORTBASE + PELMASKOFFSET#define SISVGAEN	SISUSB_PCI_IOPORTBASE + VGAENABLE#define SISDACA		SISCOLIDX#define SISDACD		SISCOLDATA/* ioctl related *//* Structure argument for SISUSB_GET_INFO ioctl  */struct sisusb_info {	__u32	sisusb_id;		/* for identifying sisusb */#define SISUSB_ID  0x53495355		/* Identify myself with 'SISU' */	__u8	sisusb_version;	__u8	sisusb_revision;	__u8	sisusb_patchlevel;	__u8	sisusb_gfxinit;		/* graphics core initialized? */	__u32	sisusb_vrambase;	__u32	sisusb_mmiobase;	__u32	sisusb_iobase;	__u32	sisusb_pcibase;	__u32	sisusb_vramsize;	/* framebuffer size in bytes */	__u32	sisusb_minor;	__u32   sisusb_fbdevactive;	/* != 0 if framebuffer device active */	__u32   sisusb_conactive;	/* != 0 if console driver active */	__u8	sisusb_reserved[28];	/* for future use */};struct sisusb_command {	__u8   operation;	/* see below */	__u8   data0;		/* operation dependent */	__u8   data1;		/* operation dependent */	__u8   data2;		/* operation dependent */	__u32  data3;		/* operation dependent */	__u32  data4;		/* for future use */};#define SUCMD_GET	0x01	/* for all: data0 = index, data3 = port */#define SUCMD_SET	0x02	/* data1 = value */#define SUCMD_SETOR	0x03	/* data1 = or */#define SUCMD_SETAND	0x04	/* data1 = and */#define SUCMD_SETANDOR	0x05	/* data1 = and, data2 = or */#define SUCMD_SETMASK	0x06	/* data1 = data, data2 = mask */#define SUCMD_CLRSCR	0x07	/* data0:1:2 = length, data3 = address */#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */#define SUCMD_SETMODE	0x09	/* Set a display mode (data3 = SiS mode) */#define SUCMD_SETVESAMODE 0x0a	/* Set a display mode (data3 = VESA mode) */#define SISUSB_COMMAND		_IOWR(0xF3,0x3D,struct sisusb_command)#define SISUSB_GET_CONFIG_SIZE	_IOR(0xF3,0x3E,__u32)#define SISUSB_GET_CONFIG	_IOR(0xF3,0x3F,struct sisusb_info)#endif /* SISUSB_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -