📄 saa6752hs.c
字号:
static void saa6752hs_set_params(struct i2c_client* client, struct v4l2_mpeg_compression* params){ struct saa6752hs_state *h = i2c_get_clientdata(client); /* check PIDs */ if (params->ts_pid_pmt <= MPEG_PID_MAX) h->params.ts_pid_pmt = params->ts_pid_pmt; if (params->ts_pid_pcr <= MPEG_PID_MAX) h->params.ts_pid_pcr = params->ts_pid_pcr; if (params->ts_pid_video <= MPEG_PID_MAX) h->params.ts_pid_video = params->ts_pid_video; if (params->ts_pid_audio <= MPEG_PID_MAX) h->params.ts_pid_audio = params->ts_pid_audio; /* check bitrate parameters */ if ((params->vi_bitrate.mode == V4L2_BITRATE_CBR) || (params->vi_bitrate.mode == V4L2_BITRATE_VBR)) h->params.vi_bitrate.mode = params->vi_bitrate.mode; if (params->vi_bitrate.mode != V4L2_BITRATE_NONE) h->params.st_bitrate.target = params->st_bitrate.target; if (params->vi_bitrate.mode != V4L2_BITRATE_NONE) h->params.vi_bitrate.target = params->vi_bitrate.target; if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) h->params.vi_bitrate.max = params->vi_bitrate.max; if (params->au_bitrate.mode != V4L2_BITRATE_NONE) h->params.au_bitrate.target = params->au_bitrate.target; /* aspect ratio */ if (params->vi_aspect_ratio == V4L2_MPEG_ASPECT_4_3 || params->vi_aspect_ratio == V4L2_MPEG_ASPECT_16_9) h->params.vi_aspect_ratio = params->vi_aspect_ratio; /* range checks */ if (h->params.st_bitrate.target > MPEG_TOTAL_TARGET_BITRATE_MAX) h->params.st_bitrate.target = MPEG_TOTAL_TARGET_BITRATE_MAX; if (h->params.vi_bitrate.target > MPEG_VIDEO_TARGET_BITRATE_MAX) h->params.vi_bitrate.target = MPEG_VIDEO_TARGET_BITRATE_MAX; if (h->params.vi_bitrate.max > MPEG_VIDEO_MAX_BITRATE_MAX) h->params.vi_bitrate.max = MPEG_VIDEO_MAX_BITRATE_MAX; if (h->params.au_bitrate.target <= 256) h->params.au_bitrate.target = 256; else h->params.au_bitrate.target = 384;}static int saa6752hs_init(struct i2c_client* client){ unsigned char buf[9], buf2[4]; struct saa6752hs_state *h; u32 crc; unsigned char localPAT[256]; unsigned char localPMT[256]; h = i2c_get_clientdata(client); /* Set video format - must be done first as it resets other settings */ buf[0] = 0x41; buf[1] = h->video_format; i2c_master_send(client, buf, 2); /* Set number of lines in input signal */ buf[0] = 0x40; buf[1] = 0x00; if (h->standard & V4L2_STD_525_60) buf[1] = 0x01; i2c_master_send(client, buf, 2); /* set bitrate */ saa6752hs_set_bitrate(client, &h->params); /* Set GOP structure {3, 13} */ buf[0] = 0x72; buf[1] = 0x03; buf[2] = 0x0D; i2c_master_send(client,buf,3); /* Set minimum Q-scale {4} */ buf[0] = 0x82; buf[1] = 0x04; i2c_master_send(client,buf,2); /* Set maximum Q-scale {12} */ buf[0] = 0x83; buf[1] = 0x0C; i2c_master_send(client,buf,2); /* Set Output Protocol */ buf[0] = 0xD0; buf[1] = 0x81; i2c_master_send(client,buf,2); /* Set video output stream format {TS} */ buf[0] = 0xB0; buf[1] = 0x05; i2c_master_send(client,buf,2); /* compute PAT */ memcpy(localPAT, PAT, sizeof(PAT)); localPAT[17] = 0xe0 | ((h->params.ts_pid_pmt >> 8) & 0x0f); localPAT[18] = h->params.ts_pid_pmt & 0xff; crc = crc32_be(~0, &localPAT[7], sizeof(PAT) - 7 - 4); localPAT[sizeof(PAT) - 4] = (crc >> 24) & 0xFF; localPAT[sizeof(PAT) - 3] = (crc >> 16) & 0xFF; localPAT[sizeof(PAT) - 2] = (crc >> 8) & 0xFF; localPAT[sizeof(PAT) - 1] = crc & 0xFF; /* compute PMT */ memcpy(localPMT, PMT, sizeof(PMT)); localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); localPMT[4] = h->params.ts_pid_pmt & 0xff; localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); localPMT[16] = h->params.ts_pid_pcr & 0xFF; localPMT[20] = 0xE0 | ((h->params.ts_pid_video >> 8) & 0x0F); localPMT[21] = h->params.ts_pid_video & 0xFF; localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F); localPMT[26] = h->params.ts_pid_audio & 0xFF; crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4); localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF; localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF; localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF; localPMT[sizeof(PMT) - 1] = crc & 0xFF; /* Set Audio PID */ buf[0] = 0xC1; buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF; buf[2] = h->params.ts_pid_audio & 0xFF; i2c_master_send(client,buf,3); /* Set Video PID */ buf[0] = 0xC0; buf[1] = (h->params.ts_pid_video >> 8) & 0xFF; buf[2] = h->params.ts_pid_video & 0xFF; i2c_master_send(client,buf,3); /* Set PCR PID */ buf[0] = 0xC4; buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF; buf[2] = h->params.ts_pid_pcr & 0xFF; i2c_master_send(client,buf,3); /* Send SI tables */ i2c_master_send(client,localPAT,sizeof(PAT)); i2c_master_send(client,localPMT,sizeof(PMT)); /* mute then unmute audio. This removes buzzing artefacts */ buf[0] = 0xa4; buf[1] = 1; i2c_master_send(client, buf, 2); buf[1] = 0; i2c_master_send(client, buf, 2); /* start it going */ saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); /* readout current state */ buf[0] = 0xE1; buf[1] = 0xA7; buf[2] = 0xFE; buf[3] = 0x82; buf[4] = 0xB0; i2c_master_send(client, buf, 5); i2c_master_recv(client, buf2, 4); /* change aspect ratio */ buf[0] = 0xE0; buf[1] = 0xA7; buf[2] = 0xFE; buf[3] = 0x82; buf[4] = 0xB0; buf[5] = buf2[0]; switch(h->params.vi_aspect_ratio) { case V4L2_MPEG_ASPECT_16_9: buf[6] = buf2[1] | 0x40; break; case V4L2_MPEG_ASPECT_4_3: default: buf[6] = buf2[1] & 0xBF; break; break; } buf[7] = buf2[2]; buf[8] = buf2[3]; i2c_master_send(client, buf, 9); return 0;}static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind){ struct saa6752hs_state *h; printk("saa6752hs: chip found @ 0x%x\n", addr<<1); if (NULL == (h = kmalloc(sizeof(*h), GFP_KERNEL))) return -ENOMEM; memset(h,0,sizeof(*h)); h->client = client_template; h->params = param_defaults; h->client.adapter = adap; h->client.addr = addr; /* Assume 625 input lines */ h->standard = 0; i2c_set_clientdata(&h->client, h); i2c_attach_client(&h->client); return 0;}static int saa6752hs_probe(struct i2c_adapter *adap){ if (adap->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adap, &addr_data, saa6752hs_attach); return 0;}static int saa6752hs_detach(struct i2c_client *client){ struct saa6752hs_state *h; h = i2c_get_clientdata(client); i2c_detach_client(client); kfree(h); return 0;}static intsaa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg){ struct saa6752hs_state *h = i2c_get_clientdata(client); struct v4l2_mpeg_compression *params = arg; int err = 0; switch (cmd) { case VIDIOC_S_MPEGCOMP: if (NULL == params) { /* apply settings and start encoder */ saa6752hs_init(client); break; } saa6752hs_set_params(client, params); /* fall through */ case VIDIOC_G_MPEGCOMP: *params = h->params; break; case VIDIOC_G_FMT: { struct v4l2_format *f = arg; if (h->video_format == SAA6752HS_VF_UNKNOWN) h->video_format = SAA6752HS_VF_D1; f->fmt.pix.width = v4l2_format_table[h->video_format].fmt.pix.width; f->fmt.pix.height = v4l2_format_table[h->video_format].fmt.pix.height; break ; } case VIDIOC_S_FMT: { struct v4l2_format *f = arg; saa6752hs_set_subsampling(client, f); break; } case VIDIOC_S_STD: h->standard = *((v4l2_std_id *) arg); break; default: /* nothing */ break; } return err;}/* ----------------------------------------------------------------------- */static struct i2c_driver driver = { .owner = THIS_MODULE, .name = "i2c saa6752hs MPEG encoder", .id = I2C_DRIVERID_SAA6752HS, .flags = I2C_DF_NOTIFY, .attach_adapter = saa6752hs_probe, .detach_client = saa6752hs_detach, .command = saa6752hs_command,};static struct i2c_client client_template ={ .name = "saa6752hs", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver,};static int __init saa6752hs_init_module(void){ return i2c_add_driver(&driver);}static void __exit saa6752hs_cleanup_module(void){ i2c_del_driver(&driver);}module_init(saa6752hs_init_module);module_exit(saa6752hs_cleanup_module);/* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- * Local variables: * c-basic-offset: 8 * End: */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -