⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 tda9875.c

📁 linux-2.6.15.6
💻 C
字号:
/* * For the TDA9875 chip * (The TDA9875 is used on the Diamond DTV2000 french version * Other cards probably use these chips as well.) * This driver will not complain if used with any * other i2c device with the same address. * * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and * Eric Sandeen * This code is placed under the terms of the GNU General Public License * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Which was based on tda8425.c by Greg Alexander (c) 1998 * * OPTIONS: * debug   - set to 1 if you'd like to see debug messages * *  Revision: 0.1 - original version */#include <linux/module.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/string.h>#include <linux/timer.h>#include <linux/delay.h>#include <linux/errno.h>#include <linux/slab.h>#include <linux/videodev.h>#include <linux/i2c.h>#include <linux/i2c-algo-bit.h>#include <linux/init.h>#include "bttv.h"#include <media/audiochip.h>static int debug; /* insmod parameter */module_param(debug, int, S_IRUGO | S_IWUSR);MODULE_LICENSE("GPL");/* Addresses to scan */static unsigned short normal_i2c[] =  {    I2C_TDA9875 >> 1,    I2C_CLIENT_END};I2C_CLIENT_INSMOD;/* This is a superset of the TDA9875 */struct tda9875 {	int mode;	int rvol, lvol;	int bass, treble;	struct i2c_client c;};static struct i2c_driver driver;static struct i2c_client client_template;#define dprintk  if (debug) printk/* The TDA9875 is made by Philips Semiconductor * http://www.semiconductors.philips.com * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator * */		/* subaddresses for TDA9875 */#define TDA9875_MUT         0x12  /*General mute  (value --> 0b11001100*/#define TDA9875_CFG         0x01  /* Config register (value --> 0b00000000 */#define TDA9875_DACOS       0x13  /*DAC i/o select (ADC) 0b0000100*/#define TDA9875_LOSR        0x16  /*Line output select regirter 0b0100 0001*/#define TDA9875_CH1V        0x0c  /*Channel 1 volume (mute)*/#define TDA9875_CH2V        0x0d  /*Channel 2 volume (mute)*/#define TDA9875_SC1         0x14  /*SCART 1 in (mono)*/#define TDA9875_SC2         0x15  /*SCART 2 in (mono)*/#define TDA9875_ADCIS       0x17  /*ADC input select (mono) 0b0110 000*/#define TDA9875_AER         0x19  /*Audio effect (AVL+Pseudo) 0b0000 0110*/#define TDA9875_MCS         0x18  /*Main channel select (DAC) 0b0000100*/#define TDA9875_MVL         0x1a  /* Main volume gauche */#define TDA9875_MVR         0x1b  /* Main volume droite */#define TDA9875_MBA         0x1d  /* Main Basse */#define TDA9875_MTR         0x1e  /* Main treble */#define TDA9875_ACS         0x1f  /* Auxilary channel select (FM) 0b0000000*/#define TDA9875_AVL         0x20  /* Auxilary volume gauche */#define TDA9875_AVR         0x21  /* Auxilary volume droite */#define TDA9875_ABA         0x22  /* Auxilary Basse */#define TDA9875_ATR         0x23  /* Auxilary treble */#define TDA9875_MSR         0x02  /* Monitor select register */#define TDA9875_C1MSB       0x03  /* Carrier 1 (FM) frequency register MSB */#define TDA9875_C1MIB       0x04  /* Carrier 1 (FM) frequency register (16-8]b */#define TDA9875_C1LSB       0x05  /* Carrier 1 (FM) frequency register LSB */#define TDA9875_C2MSB       0x06  /* Carrier 2 (nicam) frequency register MSB */#define TDA9875_C2MIB       0x07  /* Carrier 2 (nicam) frequency register (16-8]b */#define TDA9875_C2LSB       0x08  /* Carrier 2 (nicam) frequency register LSB */#define TDA9875_DCR         0x09  /* Demodulateur configuration regirter*/#define TDA9875_DEEM        0x0a  /* FM de-emphasis regirter*/#define TDA9875_FMAT        0x0b  /* FM Matrix regirter*//* values */#define TDA9875_MUTE_ON	    0xff /* general mute */#define TDA9875_MUTE_OFF    0xcc /* general no mute *//* Begin code */static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char val){	unsigned char buffer[2];	dprintk("In tda9875_write\n");	dprintk("Writing %d 0x%x\n", subaddr, val);	buffer[0] = subaddr;	buffer[1] = val;	if (2 != i2c_master_send(client,buffer,2)) {		printk(KERN_WARNING "tda9875: I/O error, trying (write %d 0x%x)\n",		       subaddr, val);		return -1;	}	return 0;}static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg){	unsigned char write[1];	unsigned char read[1];	struct i2c_msg msgs[2] = {		{ addr, 0,        1, write },		{ addr, I2C_M_RD, 1, read  }	};	write[0] = reg;	if (2 != i2c_transfer(adap,msgs,2)) {		printk(KERN_WARNING "tda9875: I/O error (read2)\n");		return -1;	}	dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]);	return read[0];}static void tda9875_set(struct i2c_client *client){	struct tda9875 *tda = i2c_get_clientdata(client);	unsigned char a;	dprintk(KERN_DEBUG "tda9875_set(%04x,%04x,%04x,%04x)\n",		tda->lvol,tda->rvol,tda->bass,tda->treble);	a = tda->lvol & 0xff;	tda9875_write(client, TDA9875_MVL, a);	a =tda->rvol & 0xff;	tda9875_write(client, TDA9875_MVR, a);	a =tda->bass & 0xff;	tda9875_write(client, TDA9875_MBA, a);	a =tda->treble  & 0xff;	tda9875_write(client, TDA9875_MTR, a);}static void do_tda9875_init(struct i2c_client *client){	struct tda9875 *t = i2c_get_clientdata(client);	dprintk("In tda9875_init\n");	tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/    	tda9875_write(client, TDA9875_MSR, 0x03 );    /* Monitor 0b00000XXX*/	tda9875_write(client, TDA9875_C1MSB, 0x00 );  /*Car1(FM) MSB XMHz*/	tda9875_write(client, TDA9875_C1MIB, 0x00 );  /*Car1(FM) MIB XMHz*/	tda9875_write(client, TDA9875_C1LSB, 0x00 );  /*Car1(FM) LSB XMHz*/	tda9875_write(client, TDA9875_C2MSB, 0x00 );  /*Car2(NICAM) MSB XMHz*/	tda9875_write(client, TDA9875_C2MIB, 0x00 );  /*Car2(NICAM) MIB XMHz*/	tda9875_write(client, TDA9875_C2LSB, 0x00 );  /*Car2(NICAM) LSB XMHz*/	tda9875_write(client, TDA9875_DCR, 0x00 );    /*Demod config 0x00*/	tda9875_write(client, TDA9875_DEEM, 0x44 );   /*DE-Emph 0b0100 0100*/	tda9875_write(client, TDA9875_FMAT, 0x00 );   /*FM Matrix reg 0x00*/	tda9875_write(client, TDA9875_SC1, 0x00 );    /* SCART 1 (SC1)*/	tda9875_write(client, TDA9875_SC2, 0x01 );    /* SCART 2 (sc2)*/	tda9875_write(client, TDA9875_CH1V, 0x10 );  /* Channel volume 1 mute*/	tda9875_write(client, TDA9875_CH2V, 0x10 );  /* Channel volume 2 mute */	tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/	tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/	tda9875_write(client, TDA9875_LOSR, 0x00 );  /* line out (in:mono)*/	tda9875_write(client, TDA9875_AER, 0x00 );   /*06 Effect (AVL+PSEUDO) */	tda9875_write(client, TDA9875_MCS, 0x44 );   /* Main ch select (DAC) */	tda9875_write(client, TDA9875_MVL, 0x03 );   /* Vol Main left 10dB */	tda9875_write(client, TDA9875_MVR, 0x03 );   /* Vol Main right 10dB*/	tda9875_write(client, TDA9875_MBA, 0x00 );   /* Main Bass Main 0dB*/	tda9875_write(client, TDA9875_MTR, 0x00 );   /* Main Treble Main 0dB*/	tda9875_write(client, TDA9875_ACS, 0x44 );   /* Aux chan select (dac)*/	tda9875_write(client, TDA9875_AVL, 0x00 );   /* Vol Aux left 0dB*/	tda9875_write(client, TDA9875_AVR, 0x00 );   /* Vol Aux right 0dB*/	tda9875_write(client, TDA9875_ABA, 0x00 );   /* Aux Bass Main 0dB*/	tda9875_write(client, TDA9875_ATR, 0x00 );   /* Aux Aigus Main 0dB*/	tda9875_write(client, TDA9875_MUT, 0xcc );   /* General mute  */	t->mode=AUDIO_UNMUTE;	t->lvol=t->rvol =0;  	/* 0dB */	t->bass=0; 			/* 0dB */	t->treble=0;  		/* 0dB */	tda9875_set(client);}/* *********************** * * i2c interface functions * * *********************** */static int tda9875_checkit(struct i2c_adapter *adap, int addr){	int dic,rev;	dic=i2c_read_register(adap,addr,254);	rev=i2c_read_register(adap,addr,255);	if(dic==0 || dic==2) { // tda9875 and tda9875A		printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n",		dic==0?"":"A", rev,addr<<1);		return 1;	}	printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr<<1,dic,rev);	return(0);}static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind){	struct tda9875 *t;	struct i2c_client *client;	dprintk("In tda9875_attach\n");	t = kmalloc(sizeof *t,GFP_KERNEL);	if (!t)		return -ENOMEM;	memset(t,0,sizeof *t);	client = &t->c;	memcpy(client,&client_template,sizeof(struct i2c_client));	client->adapter = adap;	client->addr = addr;	i2c_set_clientdata(client, t);	if(!tda9875_checkit(adap,addr)) {		kfree(t);		return 1;	}	do_tda9875_init(client);	printk(KERN_INFO "tda9875: init\n");	i2c_attach_client(client);	return 0;}static int tda9875_probe(struct i2c_adapter *adap){#ifdef I2C_CLASS_TV_ANALOG	if (adap->class & I2C_CLASS_TV_ANALOG)		return i2c_probe(adap, &addr_data, tda9875_attach);#else	if (adap->id == I2C_HW_B_BT848)		return i2c_probe(adap, &addr_data, tda9875_attach);#endif	return 0;}static int tda9875_detach(struct i2c_client *client){	struct tda9875 *t  = i2c_get_clientdata(client);	do_tda9875_init(client);	i2c_detach_client(client);	kfree(t);	return 0;}static int tda9875_command(struct i2c_client *client,				unsigned int cmd, void *arg){	struct tda9875 *t = i2c_get_clientdata(client);	dprintk("In tda9875_command...\n");	switch (cmd) {	/* --- v4l ioctls --- */	/* take care: bttv does userspace copying, we'll get a	   kernel pointer here... */	case VIDIOCGAUDIO:	{		struct video_audio *va = arg;		int left,right;		dprintk("VIDIOCGAUDIO\n");		va->flags |= VIDEO_AUDIO_VOLUME |			VIDEO_AUDIO_BASS |			VIDEO_AUDIO_TREBLE;		/* min is -84 max is 24 */		left = (t->lvol+84)*606;		right = (t->rvol+84)*606;		va->volume=max(left,right);		va->balance=(32768*min(left,right))/			(va->volume ? va->volume : 1);		va->balance=(left<right)?			(65535-va->balance) : va->balance;		va->bass = (t->bass+12)*2427;    /* min -12 max +15 */		va->treble = (t->treble+12)*2730;/* min -12 max +12 */		va->mode |= VIDEO_SOUND_MONO;		break; /* VIDIOCGAUDIO case */	}	case VIDIOCSAUDIO:	{		struct video_audio *va = arg;		int left,right;		dprintk("VIDEOCSAUDIO...\n");		left = (min(65536 - va->balance,32768) *			va->volume) / 32768;		right = (min(va->balance,(__u16)32768) *			 va->volume) / 32768;		t->lvol = ((left/606)-84) & 0xff;		if (t->lvol > 24)		 t->lvol = 24;		if (t->lvol < -84)		 t->lvol = -84 & 0xff;		t->rvol = ((right/606)-84) & 0xff;		if (t->rvol > 24)		 t->rvol = 24;		if (t->rvol < -84)		 t->rvol = -84 & 0xff;		t->bass = ((va->bass/2400)-12) & 0xff;		if (t->bass > 15)		 t->bass = 15;		if (t->bass < -12)		 t->bass = -12 & 0xff;		t->treble = ((va->treble/2700)-12) & 0xff;		if (t->treble > 12)		 t->treble = 12;		if (t->treble < -12)		 t->treble = -12 & 0xff;//printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble);		tda9875_set(client);		break;	} /* end of VIDEOCSAUDIO case */	default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */		/* nothing */		dprintk("Default\n");	} /* end of (cmd) switch */	return 0;}static struct i2c_driver driver = {	.owner          = THIS_MODULE,	.name           = "i2c tda9875 driver",	.id             = I2C_DRIVERID_TDA9875,	.flags          = I2C_DF_NOTIFY,	.attach_adapter = tda9875_probe,	.detach_client  = tda9875_detach,	.command        = tda9875_command,};static struct i2c_client client_template ={	.name      = "tda9875",	.driver    = &driver,};static int __init tda9875_init(void){	return i2c_add_driver(&driver);}static void __exit tda9875_fini(void){	i2c_del_driver(&driver);}module_init(tda9875_init);module_exit(tda9875_fini);/* * Local variables: * c-basic-offset: 8 * End: */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -