📄 av7110.c
字号:
av7110->bin_fw = dvb_ttpci_fw; av7110->size_fw = sizeof(dvb_ttpci_fw); return check_firmware(av7110);}#elsestatic void put_firmware(struct av7110* av7110){ vfree(av7110->bin_fw);}static int get_firmware(struct av7110* av7110){ int ret; const struct firmware *fw; /* request the av7110 firmware, this will block until someone uploads it */ ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev); if (ret) { if (ret == -ENOENT) { printk(KERN_ERR "dvb-ttpci: could not load firmware," " file not found: dvb-ttpci-01.fw\n"); printk(KERN_ERR "dvb-ttpci: usually this should be in" " /usr/lib/hotplug/firmware\n"); printk(KERN_ERR "dvb-ttpci: and can be downloaded here" " http://www.linuxtv.org/download/dvb/firmware/\n"); } else printk(KERN_ERR "dvb-ttpci: cannot request firmware" " (error %i)\n", ret); return -EINVAL; } if (fw->size <= 200000) { printk("dvb-ttpci: this firmware is way too small.\n"); release_firmware(fw); return -EINVAL; } /* check if the firmware is available */ av7110->bin_fw = (unsigned char *) vmalloc(fw->size); if (NULL == av7110->bin_fw) { dprintk(1, "out of memory\n"); release_firmware(fw); return -ENOMEM; } memcpy(av7110->bin_fw, fw->data, fw->size); av7110->size_fw = fw->size; if ((ret = check_firmware(av7110))) vfree(av7110->bin_fw); release_firmware(fw); return ret;}#endifstatic int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params){ struct av7110* av7110 = (struct av7110*) fe->dvb->priv; u8 pwr = 0; u8 buf[4]; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; u32 div = (params->frequency + 479500) / 125; if (params->frequency > 2000000) pwr = 3; else if (params->frequency > 1800000) pwr = 2; else if (params->frequency > 1600000) pwr = 1; else if (params->frequency > 1200000) pwr = 0; else if (params->frequency >= 1100000) pwr = 1; else pwr = 2; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; buf[2] = ((div & 0x18000) >> 10) | 0x95; buf[3] = (pwr << 6) | 0x30; // NOTE: since we're using a prescaler of 2, we set the // divisor frequency to 62.5kHz and divide by 125 above if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) return -EIO; return 0;}static struct ves1x93_config alps_bsrv2_config = { .demod_address = 0x08, .xin = 90100000UL, .invert_pwm = 0, .pll_set = alps_bsrv2_pll_set,};static u8 alps_bsru6_inittab[] = { 0x01, 0x15, 0x02, 0x30, 0x03, 0x00, 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 0x06, 0x40, /* DAC not used, set to high impendance mode */ 0x07, 0x00, /* DAC LSB */ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 0x09, 0x00, /* FIFO */ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, 0x18, 0x00, 0x19, 0x00, 0x1a, 0x00, 0x1f, 0x50, 0x20, 0x00, 0x21, 0x00, 0x22, 0x00, 0x23, 0x00, 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 0x29, 0x1e, // 1/2 threshold 0x2a, 0x14, // 2/3 threshold 0x2b, 0x0f, // 3/4 threshold 0x2c, 0x09, // 5/6 threshold 0x2d, 0x05, // 7/8 threshold 0x2e, 0x01, 0x31, 0x1f, // test all FECs 0x32, 0x19, // viterbi and synchro search 0x33, 0xfc, // rs control 0x34, 0x93, // error control 0x0f, 0x52, 0xff, 0xff};static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio){ u8 aclk = 0; u8 bclk = 0; if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } stv0299_writereg(fe, 0x13, aclk); stv0299_writereg(fe, 0x14, bclk); stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); stv0299_writereg(fe, 0x21, (ratio ) & 0xf0); return 0;}static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params){ int ret; u8 data[4]; u32 div; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; div = (params->frequency + (125 - 1)) / 125; // round correctly data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; data[3] = 0xC4; if (params->frequency > 1530000) data[3] = 0xc0; ret = i2c_transfer(i2c, &msg, 1); if (ret != 1) return -EIO; return 0;}static struct stv0299_config alps_bsru6_config = { .demod_address = 0x68, .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = alps_bsru6_set_symbol_rate, .pll_set = alps_bsru6_pll_set,};static u8 alps_bsbe1_inittab[] = { 0x01, 0x15, 0x02, 0x30, 0x03, 0x00, 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 0x06, 0x40, /* DAC not used, set to high impendance mode */ 0x07, 0x00, /* DAC LSB */ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 0x09, 0x00, /* FIFO */ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, 0x18, 0x00, 0x19, 0x00, 0x1a, 0x00, 0x1f, 0x50, 0x20, 0x00, 0x21, 0x00, 0x22, 0x00, 0x23, 0x00, 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 0x29, 0x1e, // 1/2 threshold 0x2a, 0x14, // 2/3 threshold 0x2b, 0x0f, // 3/4 threshold 0x2c, 0x09, // 5/6 threshold 0x2d, 0x05, // 7/8 threshold 0x2e, 0x01, 0x31, 0x1f, // test all FECs 0x32, 0x19, // viterbi and synchro search 0x33, 0xfc, // rs control 0x34, 0x93, // error control 0x0f, 0x92, 0xff, 0xff};static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params){ int ret; u8 data[4]; u32 div; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; div = (params->frequency + (125 - 1)) / 125; // round correctly data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; ret = i2c_transfer(i2c, &msg, 1); return (ret != 1) ? -EIO : 0;}static struct stv0299_config alps_bsbe1_config = { .demod_address = 0x68, .inittab = alps_bsbe1_inittab, .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, .min_delay_ms = 100, .set_symbol_rate = alps_bsru6_set_symbol_rate, .pll_set = alps_bsbe1_pll_set,};static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage){ struct av7110* av7110 = (struct av7110*) fe->dvb->priv; int ret; u8 data[1]; struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; switch(voltage) { case SEC_VOLTAGE_OFF: data[0] = 0x00; break; case SEC_VOLTAGE_13: data[0] = 0x44; break; case SEC_VOLTAGE_18: data[0] = 0x4c; break; default: return -EINVAL; }; ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); return (ret != 1) ? -EIO : 0;}static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params){ struct av7110* av7110 = fe->dvb->priv; u32 div; u8 data[4]; struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; div = (params->frequency + 35937500 + 31250) / 62500; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x85 | ((div >> 10) & 0x60); data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) return -EIO; return 0;}static struct ves1820_config alps_tdbe2_config = { .demod_address = 0x09, .xin = 57840000UL, .invert = 1, .selagc = VES1820_SELAGC_SIGNAMPERR, .pll_set = alps_tdbe2_pll_set,};static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params){ struct av7110* av7110 = fe->dvb->priv; u32 div; u8 data[4]; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; div = params->frequency / 125; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x8e; data[3] = 0x00; if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) return -EIO; return 0;}static struct tda8083_config grundig_29504_451_config = { .demod_address = 0x68, .pll_set = grundig_29504_451_pll_set,};static int philips_cd1516_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params){ struct av7110* av7110 = fe->dvb->priv; u32 div; u32 f = params->frequency; u8 data[4]; struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; div = (f + 36125000 + 31250) / 62500; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x8e; data[3] = (f < 174000000 ? 0xa1 : f < 470000000 ? 0x92 : 0x34); if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) return -EIO; return 0;}static struct ves1820_config philips_cd1516_config = { .demod_address = 0x09, .xin = 57840000UL, .invert = 1, .selagc = VES1820_SELAGC_SIGNAMPERR, .pll_set = philips_cd1516_pll_set,};static int alps_tdlb7_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params){ struct av7110* av7110 = fe->dvb->priv; u32 div, pwr; u8 data[4]; struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) }; div = (params->frequency + 36200000) / 166666; if (params->frequency <= 782000000) pwr = 1; else pwr = 2; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = 0x85; data[3] = pwr << 6; if (i2c_transfer(&av7110->i2c_adap, &msg, 1) != 1) return -EIO; return 0;}static int alps_tdlb7_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name){ struct av7110* av7110 = (struct av7110*) fe->dvb->priv; return request_firmware(fw, name, &av7110->dev->pci->dev);}static struct sp8870_config alps_tdlb7_config = { .demod_address = 0x71, .pll_set = alps_tdlb7_pll_set, .request_firmware = alps_tdlb7_request_firmware,};static u8 nexusca_stv0297_inittab[] = { 0x80, 0x01, 0x80, 0x00, 0x81, 0x01, 0x81, 0x00, 0x00, 0x09, 0x01, 0x69, 0x03, 0x00, 0x04, 0x00, 0x07, 0x00, 0x08, 0x00, 0x20, 0x00, 0x21, 0x40, 0x22, 0x00, 0x23, 0x00, 0x24, 0x40, 0x25, 0x88, 0x30, 0xff, 0x31, 0x00, 0x32, 0xff, 0x33, 0x00, 0x34, 0x50, 0x35, 0x7f, 0x36, 0x00, 0x37, 0x20, 0x38, 0x00, 0x40, 0x1c, 0x41, 0xff, 0x42, 0x29, 0x43, 0x00, 0x44, 0xff, 0x45, 0x00, 0x46, 0x00, 0x49, 0x04, 0x4a, 0x00, 0x4b, 0x7b, 0x52, 0x30, 0x55, 0xae, 0x56, 0x47, 0x57, 0xe1, 0x58, 0x3a, 0x5a, 0x1e, 0x5b, 0x34, 0x60, 0x00, 0x63, 0x00, 0x64, 0x00, 0x65, 0x00, 0x66, 0x00, 0x67, 0x00, 0x68, 0x00, 0x69, 0x00, 0x6a, 0x02, 0x6b, 0x00, 0x70, 0xff, 0x71, 0x00, 0x72, 0x00, 0x73, 0x00, 0x74, 0x0c, 0x80, 0x00, 0x81, 0x00, 0x82, 0x00, 0x83, 0x00, 0x84, 0x04, 0x85, 0x80, 0x86, 0x24, 0x87, 0x78, 0x88, 0x10, 0x89, 0x00, 0x90, 0x01,
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -