⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 lgdt330x_priv.h

📁 linux-2.6.15.6
💻 H
字号:
/* *    Support for LGDT3302 and LGDT3303 - VSB/QAM * *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * *    This program is free software; you can redistribute it and/or modify *    it under the terms of the GNU General Public License as published by *    the Free Software Foundation; either version 2 of the License, or *    (at your option) any later version. * *    This program is distributed in the hope that it will be useful, *    but WITHOUT ANY WARRANTY; without even the implied warranty of *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the *    GNU General Public License for more details. * *    You should have received a copy of the GNU General Public License *    along with this program; if not, write to the Free Software *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */#ifndef _LGDT330X_PRIV_#define _LGDT330X_PRIV_/* i2c control register addresses */enum I2C_REG {	TOP_CONTROL= 0x00,	IRQ_MASK= 0x01,	IRQ_STATUS= 0x02,	VSB_CARRIER_FREQ0= 0x16,	VSB_CARRIER_FREQ1= 0x17,	VSB_CARRIER_FREQ2= 0x18,	VSB_CARRIER_FREQ3= 0x19,	CARRIER_MSEQAM1= 0x1a,	CARRIER_MSEQAM2= 0x1b,	CARRIER_LOCK= 0x1c,	TIMING_RECOVERY= 0x1d,	AGC_DELAY0= 0x2a,	AGC_DELAY1= 0x2b,	AGC_DELAY2= 0x2c,	AGC_RF_BANDWIDTH0= 0x2d,	AGC_RF_BANDWIDTH1= 0x2e,	AGC_RF_BANDWIDTH2= 0x2f,	AGC_LOOP_BANDWIDTH0= 0x30,	AGC_LOOP_BANDWIDTH1= 0x31,	AGC_FUNC_CTRL1= 0x32,	AGC_FUNC_CTRL2= 0x33,	AGC_FUNC_CTRL3= 0x34,	AGC_RFIF_ACC0= 0x39,	AGC_RFIF_ACC1= 0x3a,	AGC_RFIF_ACC2= 0x3b,	AGC_STATUS= 0x3f,	SYNC_STATUS_VSB= 0x43,	EQPH_ERR0= 0x47,	EQ_ERR1= 0x48,	EQ_ERR2= 0x49,	PH_ERR1= 0x4a,	PH_ERR2= 0x4b,	DEMUX_CONTROL= 0x66,	LGDT3302_PACKET_ERR_COUNTER1= 0x6a,	LGDT3302_PACKET_ERR_COUNTER2= 0x6b,	LGDT3303_PACKET_ERR_COUNTER1= 0x8b,	LGDT3303_PACKET_ERR_COUNTER2= 0x8c,};#endif /* _LGDT330X_PRIV_ *//* * Local variables: * c-basic-offset: 8 * End: */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -